New Mexico HVAC Continuing Education: Hours, Deadline and How to Renew, New Mexico HVAC Continuing Education, New Mexico, New Mexico Construction Industries Division (CID), New Mexico HVAC Continuing Education hours, New Mexico HVAC Continuing Education renewal deadline, New Mexico license renewal, online New Mexico HVAC Continuing Education, required CE topics, CE reporting, Not allowed, Mechanical / HVAC Journeyman (JR, JSM, JPF, JG), Industry coursework approved by CID, In person or online, Before you file your triennial renewal, New Mexico CID / PSI

Home Continuing education HVAC Continuing Education New Mexico

HVAC CE · Mechanical Journeyman

New Mexico HVAC Continuing Education: Hours, Deadline and How to Renew

If you hold a mechanical or HVAC journeyman certificate in New Mexico, you need 16 hours of CID-approved CE every three years, with 8 hours on the Uniform Mechanical Code. Your certificate expires at the end of the month it was issued, so finish before then.

Last updated October 28, 2026 from New Mexico Construction Industries Division (CID) requirements

Hours per cycle

16 hrs

Uniform Mechanical Code, 8 hrs; industry topics, 8 hrs

Cycle

3 years

Tied to the date you were first certified

Deadline

Issue month’s end, every 3 yrs

Each 3 years after you were first certified

Online allowed?

Yes, if CID-approved

Courses online count when the provider is CID-approved

New Mexico HVAC CE at a glance

New Mexico HVAC renewal at a glance

Renewed withNew Mexico Construction Industries Division (CID)
CE required?Yes, if you hold a mechanical or HVAC journeyman certificate
Hours per cycle16 hrs
Cycle3 years
Required topicsUniform Mechanical Code (2021 UMC / 14.9.2 NMAC), 8 hrs; industry topics, 8 hrs
Online allowed?Yes, with CID-approved providers
DeadlineEvery 3 years, at the end of your certificate’s issue month
Who reportsYour provider reports, and you send certificates when you renew (through PSI)
CarryoverNot allowed
Grace periodAs long as 90 days past expiration, with a late fee ($1/day for the first 30 days)
Renewal fee$75 (that’s $25/year per classification)
Last updatedOctober 28, 2026

Who has to complete New Mexico HVAC CE?

14.6.4.8 NMAC requires 16 hours of CE every three years to renew a New Mexico journeyman certificate of competence in mechanical, refrigeration, sheet metal, pipefitting or gas. The state’s New Mexico Construction Industries Division (CID) handles renewal through PSI.

CE applies to

  • Journeyman Refrigeration (JR) & Sheet Metal (JSM)
  • Journeyman Pipefitter (JPF) & Gas (JG)

Exemptions

  • If all you hold is a mechanical contractor business license (MM-1, MM-2, MM-3, MM-4, MM-98), there’s no separate CE to do. That changes if you’re also renewing a journeyman certificate of competence.

How many CE hours a New Mexico HVAC needs

14.6.4.8 NMAC calls for 16 hours of CE in every three-year cycle. At least 8 hours cover current code changes (the 2021 Uniform Mechanical Code, adopted under 14.9.2 NMAC), and 8 hours are CID-approved education related to the industry.

ClassTotalRequired topicsElectivesDelivery limits
Mechanical / HVAC Journeyman (JR, JSM, JPF, JG)16 hrsUniform Mechanical Code (2021 UMC / NMMC updates), 8 hrsIndustry coursework approved by CID, 8 hrsIn person or online, with CID-approved providers

Under 14.9.2 NMAC, New Mexico now uses the 2021 Uniform Mechanical Code, which took the place of the 2015 UMC. Make sure your code update course teaches the edition CID currently enforces.

New Mexico HVAC renewal deadline

Every three years, a New Mexico mechanical journeyman certificate expires at the end of the month it was first issued. Complete your 16 hours, then send in your renewal and the $75 fee by that date.

When it’s dueEvery 3 years, at the end of your certificate’s issue month
Renewal cycle3 years
Grace windowAs long as 90 days past expiration with a late fee; canceled once 90 days pass
Late fee$1 a day for the first 30 days; as much as double the renewal fee for days 31–90
When CE must be doneBefore you file your triennial renewal

How to renew a New Mexico HVAC license

  1. Complete approved CE Ahead of your deadline
    Take 16 hours of CE approved by CID, with 8 hours on the Uniform Mechanical Code and 8 hours on industry topics.
  2. Save your certificate The day you finish
    Keep the completion certificate from every course you take. Copies have to go in with your renewal application.
  3. Make sure your hours are reported Ahead of renewal
    Check that your provider has sent in your hours, and put your completion certificates in your renewal packet.
  4. Pay to renew
    Send CID/PSI your renewal application, your CE certificates and the $75 triennial fee ($25/year per classification).
  5. Verify your certificate Once you’ve renewed
    Use the Regulation & Licensing Department portal to check that your certificate’s new expiration date is three years away.

How to tell a New Mexico HVAC course is approved

Your 16 hours have to come from courses CID has approved. Split them into 8 hours on the Uniform Mechanical Code and 8 hours on industry topics.

  • Before paying, make sure New Mexico CID has approved the course for mechanical journeyman CE.
  • Find out if the course counts toward your Uniform Mechanical Code hours or your industry hours.
  • Before your certificate expires, get 8 hours in each category for 16 in all.

Before you pay for a course, check the board’s approved provider list to make sure it counts. 14.6.4.8 NMAC requires the New Mexico Construction Industries Division to approve both courses and providers ahead of time.

How your hours get reported, and audits

Approved providers send your completions to CID/PSI, and you also attach copies of your completion certificates to your renewal application. If your renewal doesn’t show proof of all 16 CE hours, it’s rejected as incomplete.

  • Hold on to the completion certificate from each course.
  • Put copies of your completion certificates in with your triennial renewal application.
  • Keep your code hours and industry hours tracked apart.

What New Mexico HVAC renewal costs

ItemFeePaid to
Renewing a journeyman certificate (3-year cycle)$75 ($25/year)New Mexico CID / PSI
Late fee (days 1–30 past expiration)$1 a dayNew Mexico CID
CE courses (16 hours total)Depends on the providerCE provider

We checked these fees in October 2026 against the Construction Industries Division fee schedule (14.5.5.8 NMAC and NMSA 60-13-23).

Late, expired or inactive licenses

NMSA 60-13-23 and 14.6.4.8 NMAC charge daily late penalties when a journeyman certificate isn’t renewed on time, and cancel it if it stays unrenewed for more than 90 days.

Grace window (as long as 90 days)

For 90 days after expiration, you can still renew by turning in your 16 CE hours, paying the $75 renewal fee and adding the statutory late fee ($1 per day for the first 30 days).

Canceled after 90 days

If you don’t renew within 90 days of expiration, your certificate is canceled. You’ll have to apply again and retake the exam.

Catching up on CE

Renewal still requires the full 16 hours, split 8 and 8 between the two categories.

Who handles New Mexico HVAC renewals

Renewal authority

New Mexico Construction Industries Division (CID)

2550 Cerrillos Road, 3rd Floor, P.O. Box 25101, Santa Fe, NM 87504

Phone: (505) 476-4700

New Mexico Regulation & Licensing Department — Construction Industries Division

What the board does

  • Issues New Mexico mechanical contractor licenses and journeyman certificates and handles renewals
  • Sets the 16-hour CE requirement and how topics split under 14.6.4.8 NMAC
  • Adopts the New Mexico Mechanical Code (14.9.2 NMAC) and enforces it

Not licensed yet?

Our New Mexico HVAC license guide covers who needs one, the classes, the exam and how to apply.

New Mexico HVAC CE: common questions

How many CE hours do I need for a New Mexico mechanical or HVAC license?

Journeyman certificate holders need 16 hours every three years, with 8 hours on the Uniform Mechanical Code and 8 hours on industry topics.

When is the New Mexico HVAC CE deadline?

Every three years, your certificate expires at the end of the month it was first issued. Complete your CE and renew by that date.

Which code edition do New Mexico HVAC CE code hours cover?

Under 14.9.2 NMAC, New Mexico enforces the 2021 Uniform Mechanical Code, which replaced the 2015 UMC.

Can I take New Mexico HVAC CE online?

Yes, as long as the New Mexico Construction Industries Division has approved both the course and the provider ahead of time.

Who reports my New Mexico HVAC CE hours?

Both. Your approved provider reports the courses you finish, and you attach copies of the certificates when you send in your renewal.

Do extra New Mexico HVAC CE hours carry over?

No. You have to finish all 16 hours inside your current three-year certification cycle.

Where this information comes from

  1. New Mexico Regulation & Licensing Department — Construction Industries Division (CID)
  2. 14.6.4 NMAC — Journeyman Certification
  3. 14.9.2 NMAC — 2021 New Mexico Mechanical Code

Last updated October 28, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the New Mexico Construction Industries Division (CID).