New Mexico Gas Fitter License: Requirements, Exam and How to Apply, New Mexico Gas Fitter License, New Mexico, Natural Gas Fitting, Retake policy, New Mexico Regulation and Licensing Department, Construction Industries, how to get a New Mexico Gas Fitter License, New Mexico Gas Fitter License requirements, New Mexico Gas Fitter License exam, New Mexico licensing board, New Mexico contractor license, license application steps, exam reference books, Experience, Trade exam, Business & Law exam, Required, Qualifying Party, Must be approved, Minimum age

Home Licenses Gas Fitter License New Mexico

MM-2 Natural Gas Fitting · Contractor Classification

New Mexico Gas Fitter License: Requirements, Exam and How to Apply

Learn what the MM-2 classification lets you do, which experience and exams it takes, and how you apply through New Mexico’s Regulation and Licensing Department.

Last updated October 27, 2026 from New Mexico Regulation and Licensing Department, Construction Industries requirements

Exam time

~6.4 hrs

MM-2 runs 255 min; Business & Law runs 130 min

Time to get license

~4 yrs

Experience totaling 8,000 hours

Continuing ed

16 hrs

This license requires it

Do you need a New Mexico gas fitter license?

It is. Contracting for natural gas piping or gas heating work in New Mexico takes the MM-2 Natural Gas Fitting classification, which is held through an approved Qualifying Party. You must pass the state Business and Law exam too.

You need the license when

  • Your work involves installing, altering, repairing or servicing natural gas piping and fittings
  • Steam and hot water boilers are part of your work, as are hot water systems rated above 30 psi or 400,000 Btu/hour input
  • You install chimney connections, flues, burners or warm air heating systems
  • You set warm air appliances or other listed gas appliances

Exceptions

  • The MM-2 classification doesn’t include LP gas systems
  • We couldn’t confirm any exemptions, so check with the Construction Industries Division before you take on unlicensed gas work

What happens if you work unlicensed

We couldn’t confirm the penalty amounts. The Regulation and Licensing Department oversees construction trade licensing across the state and can act against anyone contracting without a license. Ask the department about the current rules.

How to get a New Mexico gas fitter license in 6 steps

  1. Build your experience ~4 years
    Put in 4 years (8,000 hours) of experience in the trade.
  2. Book both exams through PSI Before you apply
    Schedule the MM-2 and Business and Law exams online at PSI’s exam site, or call 855-807-3994. Testing centers are in the larger cities.
  3. Pass the MM-2 trade exam Exam day
    It’s open book: 100 questions, 255 minutes, and you need 75% to pass.
  4. Pass the Business and Law exam Exam day
    You get 130 minutes for 50 questions. Once you pass, an email arrives with your pass information attached.
  5. Get approved as a Qualifying Party Before licensing
    The MM-2 is held through an approved Qualifying Party, so you can’t get licensed without that approval.
  6. Mail your application
    Send the completed application with the required documents and license fee to the address listed on the form, or apply online on the Construction Industries website.

New Mexico gas fitter application checklist

Everything for the New Mexico application on one page

  • Documented experience of 4 years (8,000 hours)
  • A passing MM-2 exam score
  • A passing Business and Law exam score
  • Approved Qualifying Party
  • Completed application, documents and the license fee

The New Mexico gas fitter license

The MM-2 is a mechanical classification limited to natural gas work. LP gas systems fall outside it.

MM-2 Natural gas

Natural Gas Fitting

Lets you work on natural gas piping and fittings, boilers, warm air heating and listed gas appliances, along with related controls, control wiring, pneumatic controls, trenching and backfill. It stops short of LP gas systems.

ExamMM-2 + Business & Law
LimitNot stated

New Mexico gas fitter license requirements

You reach the MM-2 one way: build experience, pass two exams and get approved as a Qualifying Party.

RequirementMM-2 Natural Gas Fitting
Experience4 years (8,000 hours)
Trade examMM-2: 100 questions, pass with 75%
Business & Law examRequired, 50 questions
Qualifying PartyMust be approved
Continuing education16 hours
Minimum ageNot stated

The New Mexico gas fitter exam

There are two exams: the MM-2 Natural Gas Fitting trade exam and the Business and Law exam. You can use books on both, and you’re allowed to tab and highlight your references.

Format

Open book

Questions

100 + 50

Passing score

75% (MM-2)

Exam vendor

PSI

Scoring & content

  • MM-2: 100 questions in 255 minutes, 75% to pass
  • On the MM-2 you’ll see piping, gas sizing, safety and testing, combustion air, appliances, heating systems, and chimneys, flues and vents
  • Business and Law gives you 130 minutes for 50 questions, on topics from licensing and estimating to finance, taxes, labor law, liens, contracts and safety
  • Bring these MM-2 references: the IPT Pipe Trades Handbook, Modern Refrigeration and Air Conditioning, the 2021 Uniform Plumbing Code, the 2021 Uniform Mechanical Code and New Mexico’s Plumbing and Mechanical Codes (Title 14)
  • Your one reference for the Business and Law exam is the Basic Edition of the NASCLA Contractors Guide to Business, Law and Project Management

Retake policy

  • We couldn’t confirm the retake rules; ask PSI
  • The passing score for Business and Law isn’t published in the sources we checked
  • Call PSI at 855-807-3994 to schedule or reschedule
  • Each retake is $68.88 per exam, the same as your first try

Books and codes for this exam (open book)

The MM-2 Natural Gas Fitting and Business and Law exams are open book: the references below can be tabbed, highlighted and used during the test. Print the New Mexico code chapters to bring with you.

ReferenceEditionHow it’s used
Uniform Mechanical Code (UMC) — MM-2 exam2021Allowed in exam
Modern Refrigeration and Air Conditioning — MM-2 exam22nd editionAllowed in exam
IPT Pipe Trades Handbook — MM-2 examNot statedAllowed in exam
Uniform Plumbing Code (UPC) — MM-2 exam2021Allowed in exam
New Mexico Plumbing Code (NMAC Title 14, Chapter 8) — MM-2 exam2015Allowed in exam
New Mexico Mechanical Code (NMAC Title 14, Chapter 9) — MM-2 examNot statedAllowed in exam
NASCLA Contractor’s Guide to Business, Law and Project Management, Basic Edition — Business and Law examBasic EditionAllowed in exam

Prep for the New Mexico gas fitter exam

Our exam prep course, Total Prep and complete bundle for the New Mexico gas fitter exam. Prices are coming soon.

Books for this exam

Renewing your New Mexico gas fitter license

This license needs 16 hours of continuing education. Contractor licenses last three years, and renewing costs the same $150 classification fee as getting licensed. If you’re late, you pay $1 a day for the first 30 days, then the equivalent of a full year’s fee from 30 to 90 days. Past 90 days, the license is cancelled.

Renewal cycle

3 years

CE hours

16

Renewal fee

$150

Late penalty

$1/day (1–30 days)

Licensed in another state?

In New Mexico, reciprocity is limited to journeyman licenses. We couldn’t confirm an agreement that reaches the MM-2 contractor classification.

Journeyman licenses only: Alaska, Arkansas, Colorado, Idaho, Montana, Nebraska, Oklahoma, South Dakota, Texas, Utah and Wyoming

The agreements cover journeyman licenses. Ask the Regulation and Licensing Department if any of it applies to the MM-2.

MM-2 classification: no agreement listed

Expect to apply as a new applicant and sit for both the MM-2 and Business and Law exams.

City and county rules in New Mexico

The MM-2 classification applies statewide. Permits and inspections are still up to local building departments.

State handles

  • MM-2 and the other contractor classifications
  • Qualifying Party approval
  • Exams, through PSI
  • Continuing education requirements

What cities & counties handle

  • Gas and mechanical permits
  • Inspecting gas piping and appliances
  • Local business registration, if required

Who oversees New Mexico gas fitters

Licensing authority

New Mexico Regulation and Licensing Department, Construction Industries

505-476-4500

rld.nm.gov/construction-industries

What the board does

  • Issues the MM-2 and other contractor classifications
  • Approves Qualifying Parties
  • Sets the continuing education rules
  • Manages renewals and enforcement

New Mexico gas fitter license: common questions

What work does the New Mexico MM-2 gas fitting license cover?

It covers natural gas piping and fittings, controls, boilers, warm air heating systems and listed gas appliances. LP gas systems aren’t included.

How much experience do you need for a New Mexico MM-2 license?

You need 4 years (8,000 hours).

How many exams does a New Mexico gas fitter license require?

There are two. The MM-2 Natural Gas Fitting exam has 100 questions and needs 75% to pass, and the Business and Law exam has 50 questions.

Are the New Mexico gas fitter license exams open book?

Yes. You can use the approved references during the test, and you may tab and highlight them.

Who gives the New Mexico gas fitter license exams?

PSI does. Book online or call 855-807-3994.

Do New Mexico gas fitters need continuing education?

Yes. This license requires 16 hours of continuing education in New Mexico.

Will New Mexico accept my out-of-state gas fitter license?

New Mexico has journeyman license agreements with 11 states. We couldn’t confirm any for the MM-2, so plan on applying as a new applicant.

Where this information comes from

  1. New Mexico Regulation and Licensing Department, Construction Industries
  2. PSI, New Mexico exam catalog
  3. New Mexico Plumbing Code, Title 14
  4. New Mexico Mechanical Code, Title 14
  5. PSI, New Mexico licensing fees (PDF)
  6. PSI, New Mexico contractor examinations candidate information bulletin (PDF)
  7. PSI, NM CID contractor license application (PDF)
  8. PSI, NM CID Qualifying Party certificate application (PDF)
  9. New Mexico Regulation and Licensing Department, Apply for a Construction Industries license

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the New Mexico Regulation and Licensing Department.