New Mexico General Contractor License: Requirements, Exam and How to Apply, New Mexico General Contractor License, New Mexico, General Building, Residential Building, Retake policy, New Mexico Regulation and Licensing Department, Construction Industries Division, how to get a New Mexico General Contractor License, New Mexico General Contractor License requirements, New Mexico General Contractor License exam, New Mexico licensing board, New Mexico contractor license, license application steps, exam reference books, Experience, Business & Law exam

Home Licenses General Contractor License New Mexico

General Contractor · GB-98 General Building

New Mexico General Contractor License: Requirements, Exam and How to Apply

This guide covers what it takes to earn New Mexico’s GB-98 General Building license: the experience, all three exams, the NASCLA alternative and the application process with the Construction Industries Division.

Last updated October 27, 2026 from New Mexico Regulation and Licensing Department requirements

Exam time

~11 hrs

GB-2, GB-98 and Business & Law

Time to get license

~4 yrs

Experience of 4 years or 8,000 hours

Continuing ed

Not required

This license has no CE requirement

Do you need a New Mexico general contractor license?

It is if you plan to work as a general contractor building, altering, repairing or tearing down homes and commercial buildings in New Mexico. The state’s general building classification is the GB-98, issued by the Regulation and Licensing Department’s Construction Industries Division.

You need the license when

  • Building, altering, repairing or tearing down commercial buildings or certain other structures is part of your work
  • You do that same work on residential buildings (all GB-2 work is part of the GB-98)
  • Under a GB-98, you take on work in the GS specialty, GF-5 or GF-7 classifications
  • Under a GB-98, you seal coat or stripe parking lots and driveways

Exceptions

  • If your work fits a narrower classification, like GB-2 residential, you need that license rather than a GB-98
  • Before bidding on work you believe is exempt, check with the Construction Industries Division

What happens if you work unlicensed

We couldn’t confirm the penalty amounts. As a rule, the Construction Industries Division can investigate anyone contracting without the proper license and take action, so get licensed before you bid or begin any job.

How to get a New Mexico general contractor license in 6 steps

  1. Build your experience Before you apply
    Before you can qualify for a GB-98, you need 4 years (8,000 hours) of experience.
  2. Prepare your references Before exam day
    You can use books on all three exams. Tab and highlight the approved references, and print New Mexico Administrative Code Title 14, Chapter 7 (building codes) in particular.
  3. Schedule with PSI Before exam day
    Schedule your exams through PSI online or at 855-807-3994. You’ll find testing centers in the larger cities across the state.
  4. Pass the three exams Exam day
    You need at least 75% on Business & Law, GB-2 Part 1, and GB-98 Part 2 (or the NASCLA Commercial General Building exam). Your pass information comes by email.
  5. Get approved as a Qualifying Party Before you apply
    Whoever qualifies the license has to be an approved Qualifying Party.
  6. Apply with the CID After you pass
    File the signed, complete application online with the New Mexico Regulation and Licensing Department, or mail it, your documents and the license fee to the address printed on the application.

New Mexico general contractor application checklist

Everything for the New Mexico application on one page

  • Documented experience of 4 years or 8,000 hours
  • A passing Business & Law exam score
  • A passing GB-2 Part 1 score
  • A passing GB-98 Part 2 or NASCLA exam score
  • Approved Qualifying Party
  • A signed, complete application and the license fee

New Mexico general contractor license classes

No New Mexico building license is broader than the GB-98. It includes all GB-2 residential work and adds commercial work on top.

GB-98 Most complete

General Building

Lets you erect, alter, repair or demolish homes, commercial buildings and certain structures. GB-2, GS, GF-5 and GF-7 work is included, along with seal coating and striping driveways and parking lots.

ExamB&L + GB-2 + GB-98 or NASCLA
LimitNot stated

GB-2 Residential

Residential Building

This is the residential building class. Passing its exam counts as Part 1 on the way to a GB-98, and anyone holding a GB-98 can also do GB-2 work.

ExamGB-2 exam
LimitNot stated

Requirements for each New Mexico general contractor class

The only choice is the exam: New Mexico’s own GB-98, or the NASCLA Commercial General Building exam in its place. The rest of the requirements match.

RequirementState GB-98 exam routeNASCLA exam route
Experience4 years / 8,000 hours4 years / 8,000 hours
Business & Law examRequiredRequired
GB-2 Part 1 examRequiredRequired
Commercial trade examGB-98 Part 2NASCLA Commercial General Building
Passing score75%81 of 115 correct
Qualifying PartyMust be approvedMust be approved
Minimum ageNot statedNot stated

The New Mexico general contractor exam

To get the GB-98 you pass three exams: Business & Law, GB-2 Residential Building (Part 1) and GB-98 General Building (Part 2). The NASCLA Commercial General Building exam can replace GB-98 Part 2. Every New Mexico exam is open book.

Format

Open book

Questions

80 + 100 + 50

Passing score

75%

Exam vendor

PSI

Scoring & content

  • GB-2 Part 1: 80 questions in 225 minutes, 75% to pass
  • GB-98 Part 2: 100 questions in 310 minutes
  • Business & Law: 50 questions in 130 minutes
  • NASCLA option: 115 questions in 330 minutes; you need 81 correct
  • You may tab and highlight references; bring NMAC Title 14

Retake policy

  • Retake rules and waiting periods: we couldn’t confirm them
  • Retakes cost $134.53 for each GB-98 part and $68.88 for Business & Law
  • Call PSI at 855-807-3994 to schedule or reschedule

Books and codes for this exam (open book)

New Mexico’s GB-2, GB-98 and Business and Law exams are open book: the references below can be tabbed, highlighted and used during the test. The GB-2 exam uses the GB-98 list plus five additional books, and it’s worth bringing all of NMAC Title 14, since most code questions come from Chapter 7.

ReferenceEditionHow it’s used
International Building Code (IBC) — GB-98 and GB-2 exams2021Allowed in exam
Principles and Practices of Commercial Construction — GB-98 and GB-2 exams11th editionAllowed in exam
Design and Control of Concrete Mixtures — GB-98 and GB-2 exams17th editionAllowed in exam
Placing Reinforcing Bars — GB-98 and GB-2 examsNot statedAllowed in exam
Modern Masonry — GB-98 and GB-2 examsNot statedAllowed in exam
OSHA 1926 Construction Industry Regulations — GB-98 and GB-2 examsNot statedAllowed in exam
Pipe and Excavation Contracting — GB-98 and GB-2 examsRevised editionAllowed in exam
The Gypsum Construction Handbook — GB-98 and GB-2 exams7th editionAllowed in exam
SDI Manual of Construction with Steel Deck — GB-98 and GB-2 examsNot statedAllowed in exam
Training and Certification of Field Personnel for Unbonded Post-Tensioning — GB-98 and GB-2 examsNot statedAllowed in exam
Erector’s Manual: Standards and Guidelines for the Erection of Precast Concrete Products — GB-98 and GB-2 examsNot statedAllowed in exam
Technical Digest No. 9: Handling and Erection of Steel Joists and Joist Girders — GB-98 and GB-2 examsNot statedAllowed in exam
Carpentry and Building Construction, Student Edition — GB-98 and GB-2 exams2016Allowed in exam
ACI 530.1-13: Building Code Requirements and Specification for Masonry Structures — GB-98 and GB-2 exams2013Allowed in exam
ACI 318-19: Building Code Requirements for Structural Concrete and Commentary — GB-98 and GB-2 exams2019Allowed in exam
International Residential Code (IRC) — GB-2 exam2021Allowed in exam
International Energy Conservation Code (IECC) — GB-2 exam2021Allowed in exam
Contractor’s Guide to Quality Concrete Construction — GB-2 exam4th editionAllowed in exam
Roofing Construction & Estimating — GB-2 examRevised editionAllowed in exam
Building Component Safety Information (BCSI) — GB-2 examNot statedAllowed in exam
New Mexico Administrative Code Title 14 (mainly Chapter 7, Building Codes)Not statedAllowed in exam
New Mexico Commercial Building Code (NMAC 14.7.2)Not statedAllowed in exam
NASCLA Contractor’s Guide to Business, Law and Project Management, Basic Edition — Business and Law examBasic EditionAllowed in exam

Applicants may take the NASCLA Commercial General Building Contractor exam in place of the state GB-98 exam; the Business and Law exam is still required.

Prep for the New Mexico general contractor exam

Our exam prep course, Total Prep and complete bundle for the New Mexico general contractor exam. Prices are coming soon.

Books for this exam

Renewing your New Mexico general contractor license

The GB-98 has no continuing education requirement in New Mexico. Contractor licenses last three years, and renewing costs the same $300 GB-98 classification fee as getting licensed. If you’re late, you pay $1 a day for the first 30 days, then the equivalent of a full year’s fee from 30 to 90 days. Past 90 days, the license is cancelled.

Renewal cycle

3 years

CE hours

Not required

Renewal fee

$300

Late penalty

$1/day (1–30 days)

Licensed in another state?

Reciprocity in New Mexico applies to journeyman licenses, not to the GB-98. Your best shortcut is the NASCLA exam, which the state accepts instead of its own GB-98 Part 2.

No contractor reciprocity on record

You’ll apply as a new applicant. Already passed the NASCLA Commercial General Building exam? Ask the CID if it can count toward the GB-98. Business & Law is still required.

City and county rules in New Mexico

The Construction Industries Division issues your state license. Permits and inspections are still handled by each city and county.

State handles

  • The GB-98 and other contractor licenses
  • Qualifying Party approval
  • Exams, through PSI
  • Building code rules in NMAC Title 14

What cities & counties handle

  • Building permits
  • Local inspections
  • Local registration rules, so check them before you pull a permit

Who oversees New Mexico general contractors

Licensing authority

New Mexico Regulation and Licensing Department, Construction Industries Division

505-476-4500

rld.nm.gov/construction-industries

What the board does

  • Issues the GB-98 and other contractor licenses
  • Approves Qualifying Parties
  • Sets the exam requirements, which PSI administers
  • Takes applications online and by mail

New Mexico general contractor license: common questions

How much experience does the New Mexico GB-98 license require?

You need 4 years (8,000 hours) of experience. You also have to be an approved Qualifying Party or have one.

How many exams does the New Mexico GB-98 license require?

You sit for three: Business & Law, then GB-2 Residential Building (Part 1) and GB-98 General Building (Part 2). In place of GB-98 Part 2, you’re allowed to take the NASCLA Commercial General Building exam.

Is the New Mexico general contractor exam open book?

Yes. The approved references are allowed in the exam, and you can tab and highlight them. Bring NMAC Title 14, and Chapter 7 in particular.

What score passes the New Mexico general contractor exam?

The state exams take at least 75%. On the NASCLA exam, you need 81 of 115 questions correct.

Who gives the New Mexico general contractor exams?

PSI does. Book online or call 855-807-3994; testing centers are in the larger cities across the state.

Do New Mexico general contractors need continuing education?

No. The GB-98 license has no continuing education requirement in New Mexico.

Will New Mexico accept my out-of-state general contractor license?

Not directly. New Mexico’s reciprocity agreements only cover journeyman licenses, so the GB-98 isn’t included. Plan on applying as a new applicant and passing Business & Law.

Where this information comes from

  1. New Mexico Regulation and Licensing Department, Construction Industries Division
  2. PSI, New Mexico Construction Industries exams
  3. New Mexico Administrative Code, Title 14 Housing and Construction
  4. NMAC 14.7.2, New Mexico Commercial Building Code
  5. PSI, New Mexico licensing fees (PDF)
  6. PSI, New Mexico contractor examinations candidate information bulletin (PDF)
  7. PSI, NM CID contractor license application (PDF)
  8. PSI, NM CID Qualifying Party certificate application (PDF)
  9. New Mexico Regulation and Licensing Department, Apply for a Construction Industries license

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the New Mexico Regulation and Licensing Department.