New Mexico Code Official License: Requirements, Exam and How to Apply, New Mexico Code Official License, New Mexico, General Building Inspector, Residential Building Inspector, Electrical Inspector (General), Residential Electrical Inspector, Mechanical Inspector / Plan Reviewer, Plumbing Inspector, LP Gas Inspector, New Mexico Regulation and Licensing Department, Construction Industries Division, how to get a New Mexico Code Official License, New Mexico Code Official License requirements, New Mexico Code Official License exam, New Mexico licensing board

Home Licenses Code Official License New Mexico

Code Official License · Building, Electrical, Mechanical & Plumbing

New Mexico Code Official License: Requirements, Exam and How to Apply

This guide covers how to qualify, apply, pass the PSI exams and keep your New Mexico registration as a building, electrical, mechanical or plumbing inspector, based on what the Construction Industries Division requires.

Last updated October 28, 2026 from New Mexico Construction Industries Division requirements

Exam time

~4–6 hrs

Your trade exam plus Business & Law (130 min)

Time to get license

~3 yrs

Experience as a journeyman or foreman, and a job offer from an AHJ

Continuing ed

16 hrs

Each 3 years, including 8 hrs of code updates

Do you need a New Mexico code official license?

Yes. If you work for a New Mexico jurisdiction as a building, electrical, mechanical or plumbing inspector or plans reviewer, you need a state registration from the Construction Industries Division (CID). You can’t kick off the process yourself, though: the authority having jurisdiction (AHJ) hiring you has to ask for your certification.

You need the license when

  • You check buildings against the New Mexico Building Code (residential or general)
  • You check electrical installations under the New Mexico Electrical Code
  • You check boilers, ductwork, HVAC and other mechanical systems, or you review mechanical plans
  • You check gas piping, venting, drainage and water systems under the New Mexico Plumbing Code
  • You check LP gas installations

Exceptions

  • If you’re a contractor or journeyman doing the installation itself, you need a CID trade license instead of an inspector registration
  • We couldn’t confirm any other exemptions, so ask CID if you’re unsure whether your role needs a registration

Working unregistered

Each inspector registration is tied to a job with an AHJ, and under the Construction Industries Licensing Act CID can refuse, suspend or revoke a registration. We couldn’t confirm specific fines, so check with CID before you start any inspection work.

How to get a New Mexico code official license in 6 steps

  1. Get your trade experience Before you apply
    You need 3 years in your trade at the journeyman or foreman level (building requires foreman level). College or technical training can count for as many as 2 of those years.
  2. Get hired as an inspector Before you apply
    The certification request has to come from the AHJ that’s hiring you. Without one, you can’t apply on your own.
  3. Apply for the exam Before the exam
    File with the Construction Industries Division, attach copies of your current certifications and licenses, and finish the background check.
  4. Book with PSI After approval
    When your application is approved, schedule your exams with PSI online or by calling (855) 807-3994. You’ll find test centers in larger cities across New Mexico.
  5. Pass your trade exam and Business & Law Exam day
    Business & Law is open book, with 50 questions in 130 minutes and a 75% passing score. Depending on your class, the trade exam takes 100 to 210 minutes.
  6. Get your registration By mail
    PSI sends your scores to CID, and CID mails you your inspector registration.

New Mexico code official application checklist

New Mexico’s application on one page

  • 3 years as a journeyman or foreman (or an approved substitute)
  • A job with an AHJ that requests your certification
  • A finished background check
  • Exam application with copies of your certifications and licenses
  • Passing scores on your trade exam and Business & Law

New Mexico code official license classes

Inspectors in New Mexico are certified trade by trade. For every class, you pass a state trade exam through PSI plus the open-book New Mexico Business & Law exam. ICC certifications aren’t used instead.

GBI Commercial

General Building Inspector

Checks buildings through every stage of construction for code compliance, accessibility, fire safety and structural integrity.

ExamB&L + 50 questions
LimitStatewide

RBI Homes

Residential Building Inspector

Checks home construction under the New Mexico Residential Building Code.

ExamB&L + 40 questions
LimitResidential

EI All buildings

Electrical Inspector (General)

Covers electrical work in every kind of building (homes, businesses and more), from checking permits and plans to inspecting the installation.

ExamB&L + electrical
LimitStatewide

REI Homes

Residential Electrical Inspector

Checks the wiring and electrical installations in homes that are being built or renovated.

ExamB&L + electrical
LimitResidential

MI Inspector or plans

Mechanical Inspector / Plan Reviewer

Checks HVAC systems, boilers, ductwork and the piping that goes with them, and may review mechanical plans.

ExamB&L + mechanical
LimitStatewide

PI Water and gas

Plumbing Inspector

Handles plan review and inspection of water, gas, venting and drainage systems in every type of building.

ExamB&L + 75 questions
LimitStatewide

LPG Specialty

LP Gas Inspector

Checks LP gas installations. You need 3 years of experience designing, building or operating LP gas systems.

ExamNot stated
LimitLP gas

Requirements for each New Mexico code official class

For every class, you need both exams, a background check and an AHJ that requests your certification. The only real difference is the type of experience.

RequirementBuilding (general & residential)Electrical, mechanical & plumbingLP gas
Experience3 years as a foreman3 years as a journeyman or foreman3 years designing, building or operating LP gas systems
School in place of experienceCounts for up to 2 years (1 year of school = ½ year)Counts for up to 2 years (1 year of school = ½ year)Not stated
Inspector work in place of experience1 year for every 5 years as a certified inspector1 year for every 5 years as a certified inspectorNot stated
Request from an AHJRequiredRequiredRequired
Background checkRequiredRequiredRequired
ExamsBuilding plus Business & LawTrade plus Business & LawNot stated

The New Mexico code official exam

Every inspector in New Mexico has to pass two PSI exams: the trade exam for their class and the New Mexico Business & Law exam. You can use your books on Business & Law.

Format

Computer, open book

Questions

50 + 40 to 80

Passing score

75%

Exam vendor

PSI

Scoring and content

  • Business & Law: 130 minutes, 50 questions, 75% passing score
  • Residential Building: 100 minutes, 40 questions; General Building: 150 minutes, 50 questions
  • Electrical: depending on the class, either 80 questions in 210 minutes or 50 questions in 120 minutes
  • Plumbing: 200 minutes, 75 questions, 75% passing score; Mechanical: 125 minutes
  • The references cover New Mexico’s plumbing, mechanical, electrical and building codes (NMAC Title 14)

Retakes

  • You can’t schedule until your application for examination is approved
  • To book or reschedule, contact PSI at (855) 807-3994
  • We couldn’t confirm retake fees or waiting periods
  • Read PSI’s New Mexico candidate page before booking

Books and codes for this exam (open book)

New Mexico code official exams are open book: you can bring the approved code books into your PSI exam, along with printed copies of the New Mexico code rules, and tabs are allowed. The list covers the Building, Electrical, Mechanical and Plumbing Inspector trade exams plus the Business and Law exam every inspector must also pass.

ReferenceEditionHow it’s used
International Building Code (IBC) — Building Inspector exams2021Allowed in exam
International Residential Code (IRC) — Building Inspector exams2021Allowed in exam
New Mexico Commercial Building Code (NMAC 14.7.2) — Building Inspector exams2021Allowed in exam
New Mexico Residential Building Code (NMAC 14.7.3) — Building Inspector exams2021Allowed in exam
NFPA 70: National Electrical Code (NEC) — Electrical Inspector exams2020Allowed in exam
New Mexico Electrical Code (NMAC 14.10.4) — Electrical Inspector exams2020Allowed in exam
Uniform Mechanical Code (UMC) — Mechanical and Plumbing Inspector exams2021Allowed in exam
Uniform Plumbing Code (UPC) — Mechanical and Plumbing Inspector exams2021Allowed in exam
New Mexico Mechanical Code (NMAC 14.9.2) — Mechanical and Plumbing Inspector exams2015Allowed in exam
New Mexico Plumbing Code (NMAC 14.8.2) — Mechanical and Plumbing Inspector exams2015Allowed in exam
NFPA 54: National Fuel Gas Code — Plumbing Inspector exam2015Allowed in exam
New Mexico Liquid Waste Disposal Regulations — Plumbing Inspector examNot statedAllowed in exam
NASCLA Contractor’s Guide to Business, Law and Project Management — Business and Law examBasic EditionAllowed in exam

The New Mexico code rules (NMAC) are free to download and print from the state records center before your exam.

Prep for the New Mexico code official exam

Our exam prep course, Total Prep and complete bundle for the New Mexico code official exam. Prices are coming soon.

Books for this exam

Renewing your New Mexico code official license

Renewing means finishing state-approved continuing education: 16 hours or more every 3 years, and 8 of those hours must cover code updates. The remaining 8 hours can come from other approved industry courses.

Renewal cycle

Not stated

CE hours

16 each 3 years

Renewal fee

Not stated

Late penalty

Not stated

Licensed in another state?

Reciprocity for New Mexico inspectors is limited, so ask CID for the latest. Inspector experience from somewhere else can still count toward what you need.

Other states: limited arrangements

CID looks at each case on its own. Plan on applying through an AHJ and passing the New Mexico exams unless CID says otherwise.

Out-of-state inspectors: 1 year of experience

If you’ve been a certified inspector for five years in a recognized jurisdiction, that can stand in for 1 year of the experience requirement. You also need at least 2 years of related training or trade experience.

City and county rules in New Mexico

CID handles registration for the whole state, but your employer is a local jurisdiction, and that AHJ has to sponsor you for certification.

What the state handles

  • Registrations for inspectors and plan reviewers
  • Background checks and approving applications
  • The state exams, given through PSI
  • CE requirements for renewal

What cities and counties handle

  • Hiring inspectors and asking for their certification
  • Field inspections, permits and plan review
  • Everyday code enforcement

Who oversees New Mexico code officials

Licensing authority

New Mexico Regulation and Licensing Department, Construction Industries Division

505-222-9800 (Construction Industries Division) · 505-476-4622 (Regulation and Licensing Department)

rld.nm.gov/construction-industries

What the board does

  • Registers inspectors and plan reviewers for building, electrical, mechanical, plumbing and LP gas
  • Runs background checks and approves exam applications
  • Adopts New Mexico’s building, electrical, mechanical and plumbing codes
  • Decides what CE renewal takes

New Mexico code official license: common questions

How do you become a building inspector in New Mexico?

You need 3 years of construction experience at the foreman level and a job with a jurisdiction that requests your certification. Then you pass a background check plus the Business & Law and building inspector exams through PSI.

Can you apply for a New Mexico inspector registration by yourself?

No. Your certification has to be requested by the authority having jurisdiction (AHJ) that’s hiring for an inspector job.

Does New Mexico accept ICC certifications for inspector licenses?

New Mexico uses its own state exams, given through PSI: a trade exam plus the Business & Law exam. If you have ICC certifications and want to know whether they count, ask CID.

Can education replace experience for a New Mexico inspector license?

Yes, for general construction, electrical and mechanical inspectors. College or technical training can count for as many as 2 of the 3 years, and each 1 year of school equals half a year of experience.

What score do you need to pass the New Mexico inspector exams?

You need 75% on Business & Law, and the plumbing inspector exam has the same 75% cutoff.

How many CE hours do New Mexico inspectors need?

You need 16 hours or more every 3 years, and 8 of them must be on code updates.

Does an out-of-state inspector license transfer to New Mexico?

Reciprocity is limited, so ask CID. Having five years as a certified inspector in another place can count for 1 year of the experience requirement.

Where this information comes from

  1. New Mexico Construction Industries Division
  2. Construction Industries Division, Apply for a license
  3. Construction Industries Licensing Act (NMSA Chapter 60, Article 13)
  4. PSI, New Mexico construction exams
  5. New Mexico Commercial Building Code (NMAC 14.7.2)
  6. New Mexico Electrical Code (NMAC 14.10.4)
  7. New Mexico Mechanical Code (NMAC 14.9.2)
  8. New Mexico Plumbing Code (NMAC 14.8.2)

Last updated October 28, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the New Mexico Construction Industries Division.