
Home Licenses Plumber License New Mexico
Plumber License · MM-1 Plumbing Contractor
New Mexico Plumber License: Requirements, Exam and How to Apply
This guide covers what it takes to earn New Mexico’s MM-1 plumbing license, from the experience and the two exams to the application and what keeps the license active.
Last updated October 27, 2026 from New Mexico Regulation and Licensing Department, Construction Industries Division requirements
Exam time
6 hrs 20 min
MM-1 runs 250 min; Business & Law runs 130 min
Time to get license
~4 yrs
Experience of 4 years (8,000 hours)
Continuing ed
16 hrs
This license requires it
Do you need a New Mexico plumber license?
It is. Contracting for plumbing in New Mexico takes the MM-1 classification plus an approved Qualifying Party. To get there, you build 4 years of experience and pass two exams: MM-1 Plumbing and Business & Law.
You need the license when
- Installing, altering, repairing or servicing piping and plumbing fixtures
- Hot water heating systems with an input up to 30 psi or 400,000 BTU/hour
- Fuel, oil, gasoline and solar energy system piping
- Sewer lines, manholes and septic tanks
- Swimming pools, spas and irrigation sprinkler systems
Exceptions
- The MM-1 doesn’t include natural gas piping or natural gas fired appliances
- Hot water heating systems with input above 30 psi or 400,000 BTU/hour are outside what the MM-1 covers
- You can only do control wiring at 24 volts or less
What happens if you work unlicensed
Plumbing without the proper license can bring state enforcement, such as fines and stop-work orders. Before you bid or accept a job, check with the Construction Industries Division.
How to get a New Mexico plumber license in 5 steps
- Get your experience Before you apply
You need 4 years (8,000 hours) of plumbing experience, which takes up most of the timeline. - Book your PSI exams Before exam day
Schedule the MM-1 Plumbing and Business & Law exams online with PSI, or call 855-807-3994. You’ll find test centers in the larger cities around the state. - Pass both exams Exam day
You can use books on both exams. The MM-1 takes 75% to pass, and your pass information arrives by email after the test. - Get approved as a Qualifying Party Before you apply
The license is held through a Qualifying Party, and you need approval to fill that role. - Submit your application After you pass
Send the completed application with the required documents and license fee to the address it lists. Or apply online with the New Mexico Construction Industries Division.
New Mexico plumber application checklist
Everything for the New Mexico application on one page
- Plumbing experience of 4 years (8,000 hours)
- A passing MM-1 Plumbing exam score (75%)
- A passing Business & Law exam score
- Qualifying Party approval
- A signed, complete application with the required documents and fee
The New Mexico plumber license
This guide is about the MM-1 plumbing classification. You need it to contract for plumbing work, and it has a clear limit when it comes to gas work.
MM-1 Plumbing contractor
Plumbing
Covers plumbing fixtures and piping, low-pressure hot water heating, fuel and solar piping, septic and sewer lines, pools, spas and irrigation sprinklers. Natural gas piping and natural gas appliances aren’t included.
| Exam | MM-1 + Business & Law |
| Limit | Not stated |
New Mexico plumber license requirements
These are the requirements for the MM-1 classification. Where we couldn’t confirm a requirement, it’s marked “Not stated.”
| Requirement | MM-1 Plumbing |
|---|---|
| Experience | 4 years (8,000 hours) |
| Trade exam | MM-1 Plumbing; pass with 75% |
| Business exam | New Mexico Business & Law |
| Qualifying Party | You must be approved as a Qualifying Party |
| Application | A signed, complete application |
| Minimum age | Not stated |
The New Mexico plumber exam
There are two exams: the MM-1 Plumbing trade exam and New Mexico’s Business & Law exam. You can use books on the trade exam, so knowing your way around the references counts as much as knowing the content.
Format
Open book, at a test center
Questions
100 + 50
Passing score
75%
Exam vendor
PSI
Scoring & content
- MM-1 Plumbing: 100 questions in 250 minutes, 75% to pass
- Business & Law: 50 questions in 130 minutes
- The MM-1 tests water supply; drainage, waste and vents; storm drainage; backflow prevention; traps and interceptors; fixtures and water heaters; septic and sewer; and isometric analysis
- NFPA 30A is on the list, as are the 2021 Uniform Mechanical Code, the 2021 Uniform Plumbing Code and the state’s own plumbing and mechanical codes
- You may tab and highlight references
Retake policy
- We couldn’t confirm the retake rules
- To retake or reschedule, call PSI at 855-807-3994
- You can’t bring math references or OSHA 1926 into the exam room
Books and codes for this exam (open book)
The MM-1 Plumbing and Business and Law exams are open book: the references below can be tabbed, highlighted and used during the test. Print the New Mexico code chapters and liquid waste regulations to bring with you.
| Reference | Edition | How it’s used |
|---|---|---|
| Uniform Mechanical Code (UMC) — MM-1 exam | 2021 | Allowed in exam |
| Uniform Plumbing Code (UPC) — MM-1 exam | 2021 | Allowed in exam |
| IPT Pipe Trades Handbook — MM-1 exam | Not stated | Allowed in exam |
| NFPA 30A: Code for Motor Fuel Dispensing Facilities and Repair Garages — MM-1 exam | 2015 | Allowed in exam |
| New Mexico Plumbing Code (NMAC Title 14, Chapter 8) — MM-1 exam | 2015 | Allowed in exam |
| New Mexico Mechanical Code (NMAC Title 14, Chapter 9) — MM-1 exam | Not stated | Allowed in exam |
| New Mexico Liquid Waste Disposal Regulations (NMAC 20.7.3) — MM-1 exam | Not stated | Allowed in exam |
| NASCLA Contractor’s Guide to Business, Law and Project Management, Basic Edition — Business and Law exam | Basic Edition | Allowed in exam |
| Mathematics for Plumbers and Pipefitters | 8th edition | Study only |
| OSHA 1926 Construction Industry Regulations | Not stated | Study only |
Prep for the New Mexico plumber exam
Our exam prep course, Total Prep and complete bundle for the New Mexico plumber exam. Prices are coming soon.
Books for this exam
-

14.9 NMAC, Mechanical Codes (Title 14, Chapter 9)
Price coming soon -

2015 New Mexico Plumbing Code (14.8.2 NMAC)
Price coming soon -

2021 Uniform Mechanical Code
Price coming soon -

2021 Uniform Plumbing Code
Price coming soon -

IPT’s Pipe Trades Handbook
Price coming soon -

Liquid Waste Disposal and Treatment (20.7.3 NMAC)
Price coming soon -

Mathematics for Plumbers and Pipefitters, 8th edition
Price coming soon -

NASCLA Contractors Guide to Business, Law and Project Management, Basic 14th Edition, Basic Edition
Price coming soon -

NFPA 30A, Code for Motor Fuel Dispensing Facilities and Repair Garages, 2015
Price coming soon -

Book Tabs
Price coming soon
Renewing your New Mexico plumber license
Contractor licenses in New Mexico last three years. Stay on top of continuing education, since this license requires 16 hours. Renewing costs $150, the same MM-1 classification fee you paid at the start.
Renewal cycle
3 years
CE hours
16
Renewal fee
$150
Late penalty
$1/day for the first 30 days, then one year’s fees
New Mexico plumber CE
Hours, deadlines, required topics and the renewal steps, in one guide.
Licensed in another state?
In New Mexico, reciprocity agreements apply to Journeyman licenses. We couldn’t confirm any reciprocity route for the MM-1 contractor classification, so expect to take both exams.
Alaska, Arkansas, Colorado, Idaho, Montana: Journeyman reciprocity
These agreements cover Journeyman licenses only, not the MM-1 contractor classification.
Nebraska, Oklahoma, South Dakota, Texas, Utah, Wyoming: Journeyman reciprocity
These agreements cover Journeyman licenses only, not the MM-1 contractor classification.
Every other state: no agreement
You’ll apply as a new applicant and need to pass the MM-1 and Business & Law exams.
City and county rules in New Mexico
The state issues your MM-1 license. Permits and inspections on each job are still up to the local building department.
State handles
- MM-1 licensing and approving Qualifying Parties
- Exams, through PSI
- Continuing education requirements
- The New Mexico plumbing and mechanical codes
What cities & counties handle
- Job-by-job permits
- Inspections
- Local business registration
Who oversees New Mexico plumbers
Licensing authority
New Mexico Regulation and Licensing Department, Construction Industries Division
505-476-4500
What the board does
- Issues the MM-1 and other contractor classifications
- Approves Qualifying Parties
- Publishes New Mexico’s plumbing and mechanical codes
- Sets the continuing education rules
New Mexico plumber license: common questions
How much experience does the New Mexico MM-1 plumbing license require?
You need 4 years (8,000 hours) of experience.
Is the New Mexico plumber license exam open book?
Yes. You can use books on the MM-1 exam and tab and highlight the approved references. The passing score is 75%.
How many exams does a New Mexico plumber license require?
Two of them. MM-1 Plumbing has 100 questions with a 250-minute limit, and Business & Law has 50 questions with a 130-minute limit.
Can you install gas appliances with a New Mexico MM-1 license?
No. Natural gas fired appliances and natural gas piping are outside the MM-1 scope.
Does New Mexico offer plumber license reciprocity?
It does for Journeyman licenses, with Alaska, Arkansas, Colorado, Idaho, Montana, Nebraska, Oklahoma, South Dakota, Texas, Utah and Wyoming. The MM-1 contractor classification isn’t part of those agreements.
Do New Mexico plumbers need continuing education?
Yes. This license requires 16 hours of continuing education in New Mexico.
Where do you schedule the New Mexico plumbing exam?
With PSI. Book online through PSI’s New Mexico catalog or call 855-807-3994.
Where this information comes from
- New Mexico Regulation and Licensing Department, Construction Industries Division
- PSI, New Mexico contractor exams
- New Mexico Plumbing Code, 14.8.2 NMAC (PDF)
- New Mexico Mechanical Code, 14.9.2 NMAC (PDF)
- New Mexico Liquid Waste Disposal Regulations, 20.7.3 NMAC (PDF)
- New Mexico RLD, Apply for a Construction Industries License
- PSI, NM CID Contractor License Application, May 2025 (PDF)
- PSI, NM CID licensing FAQ (PDF)
- PSI, New Mexico Contractor Examinations Candidate Information Bulletin (PDF)
Last updated October 27, 2026. Spot something out of date? Tell us.
Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the New Mexico Regulation and Licensing Department, Construction Industries Division.