New Mexico Low Voltage License: Requirements, Exam and How to Apply, New Mexico Low Voltage License, New Mexico, Low Voltage Special Systems, Retake policy, New Mexico Regulation and Licensing Department, how to get a New Mexico Low Voltage License, New Mexico Low Voltage License requirements, New Mexico Low Voltage License exam, New Mexico licensing board, New Mexico contractor license, license application steps, exam reference books, Experience, Training substitute, Trade exam, Business exam, New Mexico Business & Law, Qualifying Party, Minimum age

Home Licenses Low Voltage License New Mexico

Low Voltage License · ES-3 Special Systems

New Mexico Low Voltage License: Requirements, Exam and How to Apply

In New Mexico, low voltage work falls under the ES-3 Low Voltage Special Systems classification. This guide explains what it covers, how you qualify and what the two exams include.

Last updated October 27, 2026 from New Mexico Regulation and Licensing Department requirements

Exam time

4.6 hrs

ES-3 runs 145 min; Business & Law runs 130 min

Time to get license

~2 yrs

Experience at foreman level; training can count for up to half

Continuing ed

Not required

This license has no CE requirement

Do you need a New Mexico low voltage license?

It is if you contract for low voltage special systems work in New Mexico at 50 volts or less. That covers telecom, security, fire alarm, audio-visual and CATV systems in both homes and businesses.

You need the license when

  • Your work includes cabling, interconnections or special systems, inside or outside, running at 50 volts or less
  • You handle security, fire alarm, telecommunications, audio-visual or CATV systems
  • You put in temperature control circuits or door and gate control circuits
  • You do the boring, trenching and underground wiring it takes to finish these systems

Exceptions

  • People who install TV receive-only satellite dishes at single-family homes, as long as no 120-volt tracking is required
  • Anything over 50 volts falls outside ES-3 work and requires an EE-98 or ER-1 classification

What happens if you work unlicensed

We couldn’t confirm specific fines. If you contract without the proper classification, the state can take enforcement action. Keep in mind that work over 50 volts calls for an EE-98 or ER-1 license rather than an ES-3.

How to get a New Mexico low voltage license in 6 steps

  1. Build your experience Before you apply
    You need 2 years of practical or related trade experience at foreman level. Up to half can come from accredited technical training or an apprenticeship.
  2. Book your PSI exams Before you apply
    Both the ES-3 Low Voltage exam and Business & Law are booked through PSI’s website, or you can call them at 855-807-3994.
  3. Pass both exams Exam day
    You can use books on both. The ES-3 gives you 145 minutes for 50 questions, and the passing score is 75%.
  4. Watch for your pass notice After the exam
    PSI sends your pass information by email, and it goes in with your application.
  5. Apply and qualify as a Qualifying Party
    Send the completed application with the required documents and license fee to the address listed on it. You’ll find the details on the Construction Industries website.
  6. Receive your license After approval
    After approval, you’re cleared to work on low voltage special systems at 50 volts or less.

New Mexico low voltage application checklist

Everything for the New Mexico application on one page

  • Proof of 2 years’ experience at foreman level
  • Transcripts for accredited training you’re counting
  • A passing ES-3 Low Voltage exam score
  • A passing Business & Law exam score
  • Approved Qualifying Party
  • Completed application and the license fee

The New Mexico low voltage license

The ES-3 is New Mexico’s only low voltage classification. Once your work goes over 50 volts, you need an electrical classification like EE-98 or ER-1.

ES-3 Under 50 volts

Low Voltage Special Systems

Covers telecom, security, fire alarm, audio-visual, CATV, door and gate, and temperature control systems at 50 volts or less, along with the trenching and underground work that goes with them.

ExamES-3 + B&L
Limit50 volts or less

New Mexico low voltage license requirements

The ES-3 has a single set of requirements. The license also needs an approved Qualifying Party.

RequirementES-3 Low Voltage
Experience2 years of practical or related trade experience at foreman level
Training substituteA year of accredited training counts as half a year, for up to half the total
Trade examES-3 Low Voltage; pass with 75%
Business examNew Mexico Business & Law
Qualifying PartyMust be approved
Minimum ageNot stated

The New Mexico low voltage exam

For the ES-3 you pass two exams: the ES-3 Low Voltage trade exam and the Business & Law exam that all New Mexico contractors take. You can use books on both.

Format

Open book

Questions

50 (ES-3)

Passing score

75% (ES-3)

Exam vendor

PSI

Scoring & content

  • ES-3: 50 questions in 145 minutes, 75% to pass
  • Covers conductors, grounding and bonding, power conditioning, sound and video, and general low voltage
  • Business & Law runs 130 minutes and tests you on licensing, bidding, finance, tax, labor, contracts, lien law and safety
  • The 2020 NEC and NFPA 72 are allowed, and you can tab and highlight them (the exam uses the 2010 edition, but any edition is fine)
  • Questions also come from the state electrical code, 14.10.4 NMAC

Retake policy

  • A retake costs the same $68.88 per exam; we couldn’t confirm any waiting period
  • Call PSI at 855-807-3994 to schedule or reschedule
  • Once you pass, PSI emails your pass information
  • Every New Mexico contractor license requires Business & Law

Books and codes for this exam (open book)

The ES-3 Low Voltage and Business and Law exams are open book: you can highlight, tab and bring the NEC and NFPA 72 into the PSI testing center. The ES-3 exam is based on the 2010 NFPA 72, which is out of print, so any edition is accepted.

ReferenceEditionHow it’s used
NFPA 70: National Electrical Code (NEC) — ES-3 exam2020Allowed in exam
NFPA 72: National Fire Alarm and Signaling Code — ES-3 exam2010 (any edition accepted)Allowed in exam
New Mexico Electrical Code (NMAC 14.10.4) — ES-3 exam2020Allowed in exam
NASCLA Contractor’s Guide to Business, Law and Project Management, Basic Edition — Business and Law examBasic EditionAllowed in exam
Low Voltage Wiring: Security/Fire Alarm SystemsNot statedStudy only
Telecommunications Wiring3rd editionStudy only
Understanding and Servicing Alarm Systems3rd editionStudy only
Live Sound ReinforcementBest Seller EditionStudy only
Data, Voice and Video Cabling3rd editionStudy only

Prep for the New Mexico low voltage exam

Our exam prep course, Total Prep and complete bundle for the New Mexico low voltage exam. Prices are coming soon.

Books for this exam

Renewing your New Mexico low voltage license

The ES-3 license has no continuing education requirement in New Mexico. Contractor licenses last three years, and renewing costs the same $150 classification fee as getting licensed. If you’re late, you pay $1 a day for the first 30 days, then the equivalent of a full year’s fee from 30 to 90 days. Past 90 days, the license is cancelled.

Renewal cycle

3 years

CE hours

Not required

Renewal fee

$150

Late penalty

$1/day (1–30 days)

Licensed in another state?

We couldn’t confirm any reciprocity agreement for the New Mexico ES-3 license.

No reciprocity agreements

You’ll go through the process as a new applicant: document your work history, then pass the ES-3 exam and the Business & Law exam.

City and county rules in New Mexico

The state issues your ES-3 license. Where required, local governments still take care of permits and inspections.

State handles

  • The ES-3 and other contractor classifications
  • Qualifying Party approval
  • Exams, through PSI
  • Applications and license fees

What cities & counties handle

  • Job permits, where they’re required
  • Inspections
  • Local business registration, if required

Who oversees New Mexico low voltage contractors

Licensing authority

New Mexico Regulation and Licensing Department

505-476-4500

rld.nm.gov/construction-industries

What the board does

  • Issues contractor licenses, the ES-3 classification among them
  • Approves Qualifying Parties
  • Sets each classification’s experience and exam requirements

New Mexico low voltage license: common questions

What work does a New Mexico ES-3 low voltage license allow?

It covers low voltage special systems at 50 volts or less, such as telecom, security, fire alarm, CATV, audio-visual, gate controls and temperature controls, along with the trenching and underground work needed to finish them.

How much experience does a New Mexico ES-3 license require?

You need two years of practical or related trade experience at foreman level. Each year of accredited training counts as half a year, for up to half the requirement.

Is the New Mexico ES-3 low voltage exam open book?

Yes. The 2020 NEC and NFPA 72 are allowed, and you can tab and highlight them. The exam follows the 2010 NFPA 72, though you can bring any edition.

What score passes the New Mexico ES-3 exam?

You need 75%. There are 50 questions, and you have 145 minutes.

Do New Mexico low voltage contractors need the Business & Law exam?

Yes. All New Mexico contractor licenses require it, and it runs 130 minutes.

Does the New Mexico ES-3 license require continuing education?

No. This license has no continuing education requirement in New Mexico.

Do you need a New Mexico license to install a satellite dish?

No license is needed for a TV receive-only dish at a single-family home, provided tracking doesn’t require 120 volts.

Where this information comes from

  1. New Mexico Regulation and Licensing Department, Construction Industries
  2. PSI, New Mexico contractor exam catalog
  3. 14.10.4 NMAC, New Mexico Electrical Code
  4. 14.6.6.10 NMAC, ES-3 classification scope
  5. PSI, New Mexico licensing fees (PDF)
  6. PSI, New Mexico contractor examinations candidate information bulletin (PDF)
  7. PSI, NM CID contractor license application (PDF)
  8. PSI, NM CID Qualifying Party certificate application (PDF)
  9. New Mexico Regulation and Licensing Department, Apply for a Construction Industries license

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the New Mexico Regulation and Licensing Department.