
Home Licenses HVAC License New Mexico
HVAC License · MM-3, MM-4 & MM-98
New Mexico HVAC License: Requirements, Exam and How to Apply
In New Mexico, HVAC work is licensed through the mechanical (MM) classifications. Here you’ll find the MM-3, MM-4 and MM-98: the work each one allows, the experience it takes, the PSI exams and the application steps.
Last updated October 27, 2026 from New Mexico Regulation and Licensing Department requirements
Exam time
~6 hrs
MM-3 runs 245 min; Business & Law runs 130 min
Time to get license
~4 yrs
Experience of 4 years / 8,000 hours
Continuing ed
16 hrs
Applies to MM-3, MM-4 and MM-98
Do you need a New Mexico HVAC license?
It is. New Mexico puts the installation, alteration, repair and service of HVAC and process piping systems under its mechanical classifications. Air handling and refrigeration work takes the MM-3, hydronic and process piping takes the MM-4, and the MM-98 covers every kind of mechanical work.
You need the license when
- Your work involves installing, altering, repairing or servicing HVAC air handling or refrigeration equipment, piping or ductwork (MM-3)
- You handle boilers, chillers, cooling towers, or hydronic heating, cooling or process piping (MM-4)
- You put in packaged units, condensing units, evaporative coolers or solar energy systems
- You plan to bid and contract for every type of mechanical work from MM-1 through MM-4 (MM-98)
Exceptions
- Controls and control wiring up to 24 volts are already part of the MM-3 and MM-4
- With an MM-3, you can connect water to existing valved outlets
- With an MM-3, you can bid incidental electrical, painting or structural work, provided a properly licensed contractor does it
What happens if you work unlicensed
We couldn’t confirm specific penalty amounts. As a rule, the New Mexico Regulation and Licensing Department can discipline anyone who contracts without the proper license, so wait until your license is issued before you bid or begin work.
How to get a New Mexico HVAC license in 6 steps
- Pick your classification Before you start
Go with MM-3 for air handling and refrigeration or MM-4 for hydronic and process piping. If you want every mechanical class, aim for the MM-98. - Document your experience Before you apply
Build 4 years (8,000 hours) of experience in the trade. - Get exam pre-approval Through PSI
Start by getting pre-approved. PSI approves you to test at 407-264-0562. - Pass your exams Exam day
Book Business & Law and your trade exam through PSI online or at 855-807-3994. Testing centers are in the larger cities. You can use books, and the trade exam takes 75% to pass. - Get approved as a Qualifying Party After you pass
Your pass information comes by email. If you’re applying for the MM-3 or MM-4, you must be approved as a Qualifying Party. - Submit your license application
You can apply online through the state’s license application page. If you’d rather mail it, send the completed form with your documents and license fee to the address it lists.
New Mexico HVAC application checklist
Everything for the New Mexico application on one page
- Documented experience of 4 years / 8,000 hours
- PSI exam pre-approval
- A passing Business & Law score
- A passing MM-3 or MM-4 trade exam score (75%)
- Qualifying Party approval
- Completed application, documents and the license fee
New Mexico HVAC license classes
HVAC work in New Mexico falls into two mechanical classes, and a combined license covers all of it. Each class also requires you to pass Business & Law.
MM-3 Most common
Heat, Vent and Air Conditioning
This is the class for air handling and refrigeration. It takes in equipment and piping like coils, fans, packaged and condensing units, plus evaporative coolers, ductwork, solar energy systems and pneumatic tube systems.
| Exam | B&L + MM-3 |
| Limit | Not stated |
MM-4 Hydronic & process
Heat, Cooling and Process Pipe
This is the class for hydronic heating, cooling and process piping. Think boilers, chillers, chilled water, steam and hot water systems, pressure vessels, cooling towers and fuel oil piping.
| Exam | B&L + MM-4 |
| Limit | Not stated |
MM-98 All mechanical
Combined Mechanical
Includes every type of work from MM-1 through MM-4, along with MS-3, MS-6, MS-12 and MS-14. You need to hold MM-1 through MM-4 before you can get it.
| Exam | B&L + MM-1 to MM-4 |
| Limit | Not stated |
Requirements for each New Mexico HVAC class
Every class asks for the same experience. The trade exam is what differs, and the MM-98 requires all four mechanical classes.
| Requirement | MM-3 | MM-4 | MM-98 |
|---|---|---|---|
| Experience | 4 years / 8,000 hours | 4 years / 8,000 hours | 4 years / 8,000 hours |
| Business & Law exam | Required | Required | Required |
| Trade exam | MM-3 (100 questions) | MM-4 (90 questions) | MM-1, MM-2, MM-3 and MM-4 |
| Qualifying Party | Approval required | Approval required | Not stated |
| Other licenses held | None | None | MM-1 through MM-4 |
| Continuing education | 16 hours | 16 hours | 16 hours |
The New Mexico HVAC exam
The MM-3 and MM-4 each take two exams: Business & Law and the trade exam. For the MM-98 you take five: Business & Law and MM-1 through MM-4. You can use books on all of them, and you may tab and highlight the approved references.
Format
Open book
Questions
100 (MM-3) / 90 (MM-4) + 50
Passing score
75%
Exam vendor
PSI
Scoring & content
- MM-3 has 100 questions and a 245-minute limit. Topics: refrigerants; piping; heating and cooling equipment; motors, controls and low voltage wiring; duct work, ventilation and exhaust
- MM-4 has 90 questions and a 235-minute limit. Topics: process piping; steam and hot water boiler systems; controls; fire suppression; combustion air and venting
- Business & Law: 50 questions in 130 minutes
- Among the references are the New Mexico Mechanical Code (Title 14) and the 2021 Uniform Mechanical Code
- For MM-4, the New Mexico Boiler Rules (NMAC 14.9.4) are on the reference list too
Retake policy
- We couldn’t confirm the retake rules
- To retest or reschedule, call PSI at 855-807-3994
- MM-3, MM-4 and Business & Law are $68.88 each, whether it’s your first try or a retake
Books and codes for this exam (open book)
New Mexico’s MM-3, MM-4 and Business and Law exams are open book: the references below can be tabbed, highlighted and used during the test. Books marked study only are listed for the MM-4 trade but aren’t allowed in the room.
MM-98 Combined Mechanical candidates take the MM-1 Plumbing and MM-2 Natural Gas Fitting exams as well, which use the plumbing and gas fitting reference lists.
Prep for the New Mexico HVAC exam
Our exam prep course, Total Prep and complete bundle for the New Mexico HVAC exam. Prices are coming soon.
Books for this exam
-

14.9 NMAC, Mechanical Codes (Title 14, Chapter 9)
Price coming soon -

2015 New Mexico Plumbing Code (14.8.2 NMAC)
Price coming soon -

2021 Uniform Mechanical Code
Price coming soon -

2021 Uniform Plumbing Code
Price coming soon -

Boilers (14.9.4 NMAC), New Mexico Boiler Rules and Regulations, 2005
Price coming soon -

HVAC Duct Construction Standards: Metal and Flexible, 4th Edition
Price coming soon -

IPT’s Pipe Trades Handbook
Price coming soon -

Low Pressure Boilers
Price coming soon -

Modern Refrigeration and Air Conditioning, 22nd edition
Price coming soon -

NASCLA Contractors Guide to Business, Law and Project Management, Basic 14th Edition, Basic Edition
Price coming soon -

NFPA 13, Standard for the Installation of Sprinkler Systems, 2007
Price coming soon -

NFPA 17, Standard for Dry Chemical Extinguishing Systems, 2027 Edition
Price coming soon -

NFPA 31, Standard for the Installation of Oil-Burning Equipment, 2020
Price coming soon -

Book Tabs
Price coming soon
Renewing your New Mexico HVAC license
The MM-3, MM-4 and MM-98 all require 16 hours of continuing education in New Mexico. Contractor licenses last three years, and renewing costs the same classification fee you paid to get licensed: $150 for the MM-3 or MM-4 and $300 for the MM-98. If you’re late, you pay $1 a day for the first 30 days, then the equivalent of a full year’s fee from 30 to 90 days. Past 90 days, the license is cancelled.
Renewal cycle
3 years
CE hours
16
Renewal fee
$150 ($300 MM-98)
Late penalty
$1/day (1–30 days)
New Mexico HVAC CE
Hours, deadlines, required topics and the renewal steps, in one guide.
Licensed in another state?
In New Mexico, reciprocity agreements apply only to Journeyman licenses. We couldn’t confirm any reciprocity for the MM-3, MM-4 or MM-98 contractor classes.
Journeyman licenses: reciprocity with 11 states
Journeyman licenses from these states are covered: Wyoming, Utah, Texas, South Dakota, Oklahoma, Nebraska, Montana, Idaho, Colorado, Arkansas and Alaska.
MM contractor classes: no agreement listed
You’ll apply as a new applicant and take both Business & Law and your trade exam.
City and county rules in New Mexico
The state issues MM licenses. We couldn’t confirm any city or county licensing rules, so check with your local office before pulling permits.
State handles
- MM-3, MM-4 and MM-98 licenses
- Qualifying Party approval
- Exams, through PSI
- Continuing education requirements
What cities & counties handle
- Building and mechanical permits, plus inspections
- Local business licenses, if required
Who oversees New Mexico HVAC contractors
Licensing authority
New Mexico Regulation and Licensing Department
505-476-4500
What the board does
- Issues the MM-3, MM-4, MM-98 and other mechanical classifications
- Approves Qualifying Parties
- Sets the continuing education rules
- Takes license applications online
New Mexico HVAC license: common questions
Which license do you need for HVAC work in New Mexico?
The MM-3 covers air handling, ductwork and refrigeration. The MM-4 is for hydronic, boiler and process piping work, and the MM-98 includes every mechanical class.
How much experience does a New Mexico HVAC license require?
The MM-3, MM-4 and MM-98 each require 4 years (8,000 hours) of experience.
Can you use books on the New Mexico HVAC license exam?
Yes. PSI’s exams are open book, and you can tab and highlight the approved references. The MM-3 and MM-4 exams take 75% to pass.
How many questions are on the New Mexico MM-3 HVAC exam?
It has 100 questions and a 245-minute limit. You also sit for Business & Law, which has 50 questions and a 130-minute limit.
How do you get the New Mexico MM-98 mechanical license?
You need 4 years of experience and must already hold MM-1 through MM-4. In practice, that’s five exams: Business & Law and the four mechanical classes.
Will New Mexico accept my out-of-state HVAC license?
Reciprocity applies only to Journeyman licenses, with Alaska, Arkansas, Colorado, Idaho, Montana, Nebraska, Oklahoma, South Dakota, Texas, Utah and Wyoming. We couldn’t confirm any for the MM contractor classes.
Do New Mexico HVAC licenses require continuing education?
Yes. These licenses need 16 hours of continuing education in New Mexico.
Where this information comes from
- New Mexico Regulation and Licensing Department, Apply for a Construction Industries license
- PSI, New Mexico exam catalog
- New Mexico Mechanical Code, 14.9.2 NMAC (PDF)
- New Mexico Mechanical Code, Title 14 (State Records Center)
- New Mexico Boiler Rules and Regulations, 14.9.4 NMAC
- PSI, New Mexico licensing fees (PDF)
- PSI, New Mexico contractor examinations candidate information bulletin (PDF)
- PSI, NM CID contractor license application (PDF)
- PSI, NM CID Qualifying Party certificate application (PDF)
Last updated October 27, 2026. Spot something out of date? Tell us.
Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the New Mexico Regulation and Licensing Department.