New Mexico Business and Law Exam: Format and How to Pass, New Mexico Business and Law Exam, New Mexico, Residential Building, General Building, Residential and Commercial Electrical, Heat, Vent and Air Conditioning, Plumbing, New Mexico Regulation and Licensing Department, Construction Industries, how to get a New Mexico Business and Law Exam, New Mexico Business and Law Exam requirements, New Mexico Business and Law Exam exam, New Mexico licensing board, New Mexico contractor license, license application steps, exam reference books, B&L + trade exam

Home Licenses Business and Law Exam New Mexico

Business and Law Exam · All Contractor Classes

New Mexico Business and Law Exam: Format and How to Pass

Almost every contractor in New Mexico has to meet the business and law requirement. This guide explains who needs it, how the approved course can stand in for the exam, what the exam covers and where it fits in the licensing process.

Last updated October 27, 2026 from New Mexico Regulation and Licensing Department requirements

Exam time

2 hrs 10 min

For Business & Law only; the trade exam is separate

Time to get license

2–4 yrs

GB-2 takes 2 years; other major trades take 4 years

Continuing ed

Not required

Contractors don’t need CE right now

Who has to pass the New Mexico business and law exam?

You do. Every type of contractor license in New Mexico comes with the business and law requirement. You can meet it by passing the exam or by finishing an approved course.

You need the license when

  • You’re applying for a New Mexico contractor license of any type
  • You also have to pass the trade exam for your classification
  • Business and law and your trade exam both have to be passed within 1 year
  • PSI has to approve you before you can book

Exceptions

  • Finishing an approved business and law course meets the requirement in place of the exam
  • We couldn’t confirm any other exemptions, so check with RLD if you’re not sure

What happens if you work unlicensed

The sources we checked don’t give penalty amounts. As a rule, the New Mexico Regulation and Licensing Department can deny, suspend or revoke licenses, discipline licensees and go after anyone contracting without a license. Don’t bid or work until you have yours.

How to sign up for the New Mexico business and law exam

  1. Choose your classification Before you start
    The classification you choose decides your trade exam and the experience you need: 2 years for GB-2 and 4 years for the other major trades.
  2. Get PSI approval Approval lasts 6 months
    Send PSI an Examination Registration Form. After you’re approved, the approval is good for 6 months, and for most major trade exams you get only two tries in that time.
  3. Gather your references Before exam day
    You can use books on the exam. Print out the contractor license rules and the Construction Industries Licensing Act, and bring the approved NASCLA guide.
  4. Pass both business and law and your trade exam Within 1 year
    To book, call PSI at 855-807-3994. You’ll find test centers in the bigger cities around New Mexico.
  5. Apply for the license Board review
    Send RLD a complete application online, or call them at 505-476-4500.

New Mexico business and law exam application checklist

Everything for the New Mexico application on one page

  • An Examination Registration Form sent to PSI
  • A pass on business and law, or a finished approved course
  • A pass on your trade exam within 1 year
  • 2 or 4 years of experience, based on your classification
  • Printouts of the Licensing Act and NMAC 14.6.3 for test day
  • A complete application filed with RLD

New Mexico licenses that need the business and law exam

All New Mexico contractor classifications have the business and law requirement, along with a trade exam of their own. Here are some common ones:

GB-2 Residential

Residential Building

Residential building work. You need 2 years / 2,000 hours of experience.

ExamB&L + trade exam
LimitNot stated

GB-98 Common

General Building

General building work. You need 4 years / 4,000 hours of experience.

ExamB&L + trade exam
LimitNot stated

EE-98 Electrical

Residential and Commercial Electrical

Electrical work on homes and commercial buildings.

ExamB&L + trade exam
LimitNot stated

MM-3 Mechanical

Heat, Vent and Air Conditioning

Work on heating, ventilation and air conditioning.

ExamB&L + trade exam
LimitNot stated

MM-1 Mechanical

Plumbing

Plumbing jobs.

ExamB&L + trade exam
LimitNot stated

Before you can sit for the business and law exam

To get approved, you send PSI an Examination Registration Form. The license itself requires experience, and how much depends on your classification.

RequirementGB-2 ResidentialAll other major trades
Exam approvalSend PSI an Examination Registration FormSend PSI an Examination Registration Form
Approval period6 months6 months
Business & Law50 questions in 130 minutes50 questions in 130 minutes
AlternativeAn approved business and law courseAn approved business and law course
DeadlineBoth exams passed within 1 yearBoth exams passed within 1 year
Experience2 years / 2,000 hours4 years / 4,000 hours

Inside the New Mexico business and law exam

Most people take two exams, business and law and a trade exam. You can use books on business and law, and an approved course can take its place.

Format

Open book

Questions

50

Passing score

75%

Exam vendor

PSI

Scoring and content

  • 50 questions, 130 minutes
  • You need 75% right to pass
  • You’ll see questions on licensing, estimating and bidding, how a business is organized, financial management, and tax and labor laws
  • It also covers contracts, lien law, project management, risk management, and environmental and safety topics
  • Your references are NMSA Chapter 60 Article 13, NMAC 14.6.3 and the NASCLA Contractors Guide to Business, Law and Project Management (Basic Edition)

Retakes

  • Your exam approval is good for 6 months
  • For most major trade exams, you get only two tries per approval period
  • Business and law and your trade exam both have to be passed within 1 year
  • You can’t bring prep course materials into the exam room
  • A retake costs $68.88, the same as your first try

Books and codes for this exam (open book)

The New Mexico Business and Law exam is open book, and you can tab and highlight the approved references and bring them into the test.

ReferenceEditionHow it’s used
NASCLA Contractor’s Guide to Business, Law and Project ManagementBasic EditionAllowed in exam
New Mexico Construction Industries Licensing Act (NMSA Chapter 60, Article 13) (print)Not statedAllowed in exam
New Mexico Contractor’s License Requirements (NMAC Title 14, Chapter 6, Part 3) (print)Not statedAllowed in exam

The licensing act and rules are free to download from the Construction Industries Division, so candidates print them and bring them in.

Prep for the New Mexico business and law exam

Our exam prep course, Total Prep and complete bundle for the New Mexico business and law exam. Prices are coming soon.

Books for this exam

After you pass the business and law exam

Right now, New Mexico contractors don’t need continuing education. A contractor license lasts three years, and you renew for the same classification fee you paid when it was new: $300 for GB-2, GB-98, GA-98, GF-98, EE-98 and MM-98, and $150 for the rest. If you’re late, it’s $1 a day for the first 30 days, then the equivalent of one year’s fee from 30 to 90 days. Past 90 days, your license is cancelled.

Renewal cycle

3 years

CE hours

Not required

Renewal fee

$150–$300 per classification

Late penalty

$1/day (1–30 days)

Licensed in another state?

New Mexico has reciprocity agreements that cover a range of states and license classifications. We couldn’t confirm which states are included or what each agreement waives.

Several states: depends on the classification

Check with RLD to see if your current license counts. If there’s no agreement, you’ll apply as a new applicant and take both exams.

City and county rules in New Mexico

The state runs contractor licensing and exams. Permits and local business rules are up to cities and counties.

What the state handles

  • Contractor licenses and classifications
  • The business and law requirement and trade exams, given by PSI
  • The Construction Industries Licensing Act and its rules

What cities and counties handle

  • Permits and inspections
  • Local business licenses, where they exist

Who licenses contractors in New Mexico

Licensing authority

New Mexico Regulation and Licensing Department, Construction Industries

505-476-4500

rld.nm.gov/construction-industries

What the board does

  • Issues a contractor license for each classification
  • Sets the requirements for business and law and the trade exams
  • Publishes the Construction Industries Licensing Act and its rules
  • Checks applications and experience

New Mexico business and law exam: common questions

Do you have to take the New Mexico business and law exam?

For every type of contractor license, yes. Finishing an approved business and law course also meets the requirement.

How long is the New Mexico business and law exam?

There are 50, and you get 130 minutes. You can use books, and a 75% passes.

What books can you bring to the New Mexico business and law exam?

Bring the NASCLA Contractors Guide to Business, Law and Project Management (Basic Edition), along with printouts of NMAC 14.6.3 and the Construction Industries Licensing Act.

How long is New Mexico contractor exam approval good for?

It lasts 6 months. For most major trade exams, you get only two tries during that time.

How much experience do you need for a New Mexico contractor license?

GB-2 Residential Building takes 2 years, or 2,000 hours. For most of the other major trades, it’s 4 years, or 4,000 hours.

Is continuing education required for New Mexico contractor licenses?

Not right now.

Where this information comes from

  1. New Mexico Regulation and Licensing Department, Construction Industries
  2. RLD Construction Industries, Rules, laws and building codes (NMSA 60-13, NMAC 14.6.3)
  3. PSI Exams, Contact and scheduling
  4. PSI, New Mexico licensing fees (PDF)
  5. PSI, New Mexico contractor examinations candidate information bulletin (PDF)
  6. PSI, NM CID contractor license application (PDF)
  7. PSI, NM CID Qualifying Party certificate application (PDF)
  8. New Mexico Regulation and Licensing Department, Apply for a Construction Industries license

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the New Mexico Regulation and Licensing Department.