District of Columbia Plumber License: Requirements, Exam and How to Apply, District of Columbia Plumber License, District Of Columbia, Journeyman Plumber with Gas, Master Plumber with Gas, Retaking the exam, DC Department of Licensing and Consumer Protection (Board of Industrial Trades), how to get a District of Columbia Plumber License, District of Columbia Plumber License requirements, District of Columbia Plumber License exam, District Of Columbia licensing board, District Of Columbia contractor license, license application steps, exam reference books

Home Licenses Plumber License District of Columbia

Plumber License · Journeyman & Master with Gas

District of Columbia Plumber License: Requirements, Exam and How to Apply

The District licenses plumbers with gas at two levels: Journeyman and Master. Here you’ll find the experience each level takes, how the PSI exams work, how to apply through DLCP and what comes next.

Last updated October 27, 2026 from DC Department of Licensing and Consumer Protection requirements

Exam time

4 hrs

For the Journeyman exam; the Master exam time isn’t published

Time to get license

~4–8 yrs

4 yrs to reach Journeyman, then 4 licensed yrs before Master

Continuing ed

Not required

Neither Journeyman nor Master needs CE

Do you need a District of Columbia plumber license?

Yes. In DC, plumbing and gas fitting are licensed by the Department of Licensing and Consumer Protection along with the Board of Industrial Trades. Together they cover Journey, Master and Contractor Plumbers.

You need the license when

  • Designing, installing, repairing or removing plumbing fixtures that take in and drain water or water-carried waste
  • Running, testing or installing nonindustrial gas piping and appliances, from the service regulator outlet or meter set assembly onward
  • Supervising other plumbers, or moving up past Journeyman (Master)

Exceptions

  • Apprentice plumbers and gasfitters who are still earning their required hours
  • We couldn’t confirm any other exemptions, so ask DLCP before doing unlicensed work

What happens if you work unlicensed

The sources we checked don’t give penalty amounts. Unlicensed plumbing and gas work can draw enforcement from DLCP and the Board of Industrial Trades, so ask DLCP what the current penalties are.

How to get a District of Columbia plumber license in 5 steps

  1. Get your experience ~4 yrs
    Journeyman candidates need 8,000 apprentice hours spread over at least 4 years, or a mechanical engineering degree and 2 years of verified experience. Master candidates need at least 4 years holding a Journeyman license.
  2. Get approved to test Before you schedule
    Open an account on the DC Board of Industrial Trades site, then request pre-approval for the exam.
  3. Take and pass the PSI exam Exam day
    Book at candidate.psiexams.com or by phone at 855-557-0616. You can bring references, as long as they’re bound and tabbed.
  4. Apply for the license Once you pass
    Your application goes to DLCP. You can file at dlcp.dc.gov or reach them by phone at 202-671-4500.
  5. Move up to Master 4 yrs later
    Once you’ve been a licensed Journeyman for 4 years or more, you can apply to take the Master Plumber with Gas exam.

District of Columbia plumber application checklist

Everything for your District of Columbia application on one page

  • Proof of 8,000 apprentice hours or an approved education route
  • For Master: at least 4 years as a licensed Journeyman
  • An account with the Board of Industrial Trades and exam pre-approval
  • Your PSI exam scheduled and passed
  • Your license application filed with DLCP

District of Columbia plumber license classes

Gas fitting is built into DC’s plumbing licenses. The two levels share the same scope of work, but Master takes more experience and a longer exam.

JRY Start here

Journeyman Plumber with Gas

This level lets you handle drainage connections and plumbing fixtures. It also lets you work on nonindustrial gas piping and appliances from the outlet of the meter or service regulator onward.

ExamJourneyman Plumber with Gas
LimitNo limit stated

MST Advanced

Master Plumber with Gas

Covers the same plumbing and gas work a Journeyman does. You need at least 4 years as a licensed Journeyman to qualify.

ExamMaster Plumber with Gas
LimitNo limit stated

Requirements for each District of Columbia plumber class

Everyone begins at Journeyman. Once you’ve held that license for at least 4 years, you’re eligible for Master.

RequirementJourneyman with GasMaster with Gas
Experience8,000 apprentice hrs across 4+ yrs, an ME degree and 2 yrs, or an equivalent the Board approves4+ yrs holding a Journeyman Plumber license
ExamJourneyman Plumber with GasMaster Plumber with Gas
Questions70100
Exam time4 hrsNot stated
Pre-approval to testRequiredRequired
Continuing educationNot requiredNot required

The District of Columbia plumber exam

There’s a separate open-book PSI exam for each level. Bring bound references; tabs and highlighting are fine.

Format

Open book

Questions

70 (JRY) / 100 (Master)

Passing score

Not stated

Exam vendor

PSI

Scoring and content

  • Journeyman: 70 questions in 4 hours
  • Master: 100 questions
  • You’ll be tested on drainage, venting, fixtures, traps and cleanouts, water distribution, gas, and plan reading
  • The 2012 International Plumbing Code and 2012 International Fuel Gas Code are among the references
  • Every reference has to be bound, but you can tab and highlight it

Retaking the exam

  • We couldn’t confirm the retake rules
  • Call PSI at 855-557-0616 to book or change your exam
  • PSI charges $52 per exam; ask PSI about passing scores and how long you wait to retake

Books and codes for this exam (open book)

The District of Columbia Journeyman and Master Plumber with Gas exams are open book. You can tab and highlight the references below and use them during the test, as long as they’re bound.

ReferenceEditionHow it’s used
International Plumbing Code (IPC)2012Allowed in exam
International Fuel Gas Code (IFGC)2012Allowed in exam

Prep for the District of Columbia plumber exam

Our exam prep course, Total Prep and complete bundle for the District of Columbia plumber exam. Prices are coming soon.

Books for this exam

Renewing your District of Columbia plumber license

You don’t need continuing education to keep a Journeyman or Master Plumber license in DC. Plumber and gasfitter licenses last up to 2 years and expire on March 31 of even-numbered years. Renewing costs $110 for a journeyman or $155 for a master, plus $50 if you’re late.

Renewal cycle

Up to 2 years

CE hours

Not required

Renewal fee

$110–$155

Late penalty

$50

Licensed in another state?

DC won’t accept Journeyman or Master Plumber licenses from other states through reciprocity.

No reciprocity with other states

Your plumbing license from another state won’t carry over. You apply as a new applicant, show DC’s required experience and pass the PSI exam.

City and county rules in District of Columbia

Since DC is one jurisdiction, the District sets both the licensing rules and the job-site rules.

What the District licenses

  • Journeyman and Master Plumber with Gas licenses, issued by DLCP
  • Approval to sit for the exam, through the Board of Industrial Trades
  • Exams given by PSI
  • Disciplining license holders

Local permits and inspections

  • Plumbing permits
  • Inspections
  • Business licenses

Who oversees plumbers in the District of Columbia

Licensing authority

DC Department of Licensing and Consumer Protection (Board of Industrial Trades)

202-671-4500

dlcp.dc.gov/service/professional-licensing

What the board does

  • Issues the Journeyman and Master Plumber with Gas licenses
  • Reviews applications and approves candidates to test
  • Decides which mixes of education and experience count
  • Handles licensing for Journey, Master and Contractor Plumbers

District of Columbia plumber license: common questions

How do you become a journeyman plumber in DC?

Put in at least 8,000 hours across 4 years as an apprentice plumber or gasfitter, or meet an approved mix of education and experience instead. After that, you pass the Journeyman Plumber with Gas exam.

How long does it take to get a Master Plumber license in DC?

You have to spend at least 4 years as a licensed Journeyman Plumber first. Counting your apprenticeship, that’s about 8 years overall.

Does a DC plumbing license cover gas fitting?

Yes. Whether you’re a Journeyman or a Master, your license lets you work on nonindustrial gas piping and appliances from the meter set assembly or service regulator outlet onward.

Can you use books on the DC plumbing license exam?

Yes. Bring bound references; you’re allowed to highlight and tab them. Expect 70 questions in 4 hours at the Journeyman level and 100 questions at the Master level.

Do DC plumbers need continuing education to renew?

No. DC has no continuing education requirement for Journeyman or Master Plumbers.

Does DC accept a plumbing license from another state?

No. The District doesn’t offer reciprocity for Journeyman or Master Plumbers.

Where this information comes from

  1. DC Department of Licensing and Consumer Protection, Professional licensing
  2. PSI Exams, candidate scheduling
  3. DC Board of Industrial Trades, Journeyman and Master Plumber with Gas requirements
  4. DLCP Board of Industrial Trades, fee schedule
  5. PSI Washington D.C. Contractor/Trades Candidate Information Bulletin

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the DC Department of Licensing and Consumer Protection.