District of Columbia Gas Fitter License: Requirements, Exam and How to Apply, District of Columbia Gas Fitter License, District Of Columbia, Journeyman Gas Pipe Fitter, Master Gas Pipe Fitter, DC Department of Licensing and Consumer Protection, how to get a District of Columbia Gas Fitter License, District of Columbia Gas Fitter License requirements, District of Columbia Gas Fitter License exam, District Of Columbia licensing board, District Of Columbia contractor license, license application steps, exam reference books, Experience, Education path

Home Licenses Gas Fitter License District of Columbia

Gas Pipe Fitter · Journeyman & Master

District of Columbia Gas Fitter License: Requirements, Exam and How to Apply

Here’s how you become a Journeyman or Master Gas Pipe Fitter in DC, covering the experience requirement, the open-book PSI exams and the DLCP application.

Last updated October 27, 2026 from DC Department of Licensing and Consumer Protection requirements

Exam time

3 hrs

For the journeyman exam; we couldn’t confirm the master exam’s length

Time to get license

~4 yrs

Journeyman takes 8,000 apprentice hours; master takes 4 years more

Continuing ed

Not required

Neither journeyman nor master needs CE

Do you need a District of Columbia gas fitter license?

Yes. If you design, install, test or extend nonindustrial gas piping and appliances in DC, anywhere from the meter outlet to the appliance connections, DLCP requires you to hold a Gas Pipe Fitter license. The District issues Journey, Master and Contractor Gas Pipe Fitter licenses.

You need the license when

  • You install, test or operate gas piping systems and appliances that aren’t industrial
  • You run gas piping from the meter set assembly (or the service regulator) to the appliance inlets
  • You bring in, maintain or extend a gas supply in a building or on a property
  • You vent gas fixtures and their appurtenances
  • You dig up a street, alley or other area to hook a building up to a gas service pipe

Exceptions

  • Apprentices working under licensed supervision toward the 8,000 hours they need
  • This license only covers nonindustrial work, so industrial gas systems aren’t part of it

What happens if you work unlicensed

If you do gas fitting work in DC without the proper license, DLCP can take enforcement action, such as fines and stop-work orders. Ask DLCP about current penalties.

How to get a District of Columbia gas fitter license in 6 steps

  1. Gain your experience First step
    Work 8,000 hours over 4 or more years as an apprentice plumber or gasfitter. Or qualify with a mechanical engineering degree and 2 years of experience someone has verified.
  2. Get pre-approved for the exam Before testing
    Your first stop is the DC Board of Industrial Trades website: open an account there, then get cleared to take your exam.
  3. Book with PSI Before testing
    Use PSI’s candidate site at psiexams.com to book, or phone them at 855-557-0616.
  4. Pass your exam Test day
    For journeyman, you get 3 hours for 50 questions. The master exam has 75 questions. You can use bound references on both.
  5. Apply with DLCP Once you pass
    You can apply on the web via DLCP, or you can phone 202-671-4500 instead.
  6. Step up to master 4+ yrs on
    Once you’ve been a licensed journeyman for 4 years, you can take the Master Gas Pipe Fitter exam.

District of Columbia gas fitter application checklist

The District of Columbia application on a single page

  • Records of 8,000 apprentice hours (or a degree and 2 years)
  • A Board of Industrial Trades website account
  • Pre-approval for the exam
  • A bound, tabbed copy of the International Fuel Gas Code
  • A passing score on the PSI exam
  • Your application sent in through DLCP

District of Columbia gas fitter license classes

The District issues Journey, Master and Contractor Gas Pipe Fitter licenses. Below, we cover the Journeyman and Master levels, and each one has a separate exam.

JRY Starting level

Journeyman Gas Pipe Fitter

Covers gas piping and appliances that aren’t industrial: you design, install, test and extend them, starting at the meter outlet and ending at the appliance connections.

Exam50 questions; open book
LimitNot stated

MST Higher level

Master Gas Pipe Fitter

DC’s highest gas fitting license. It’s for experienced journeymen who’ve spent 4 or more years as a licensed Journeyman Gas Pipe Fitter.

Exam75 questions; open book
LimitNot stated

Requirements for each District of Columbia gas fitter class

To qualify as a journeyman, you can use apprentice hours, an engineering degree with experience, or a combination the Board accepts. To qualify as a master, you need 4 years as a licensed journeyman.

RequirementJourneymanMaster
Experience8,000 hrs over 4 or more yrs as an apprentice plumber or gasfitter4+ yrs licensed as a Journeyman Gas Pipe Fitter
Education pathA mechanical engineering degree and 2 yrs of hands-on experience, verified by a masterNot stated
Equivalent the Board approvesSimilar experience or schooling the Board acceptsNot stated
ExamJourneyman Gas Pipe Fitter exam (50 questions)Master Gas Pipe Fitter exam (75 questions)
Continuing educationNot requiredNot required
Minimum ageNot statedNot stated

The District of Columbia gas fitter exam

PSI gives a separate exam for each level. You can use books on both, and your bound references can be tabbed and highlighted.

Format

Open book

Questions

50 / 75

Passing score

Not stated

Exam vendor

PSI

Scoring and content

  • Journeyman: 3 hours for 50 questions
  • Journeyman subjects: pipe sizing and installation, venting, appliances, materials, theory and terminology
  • Master: 75 questions; we couldn’t confirm the time limit
  • The master exam also covers special requirements, operating principles and plan reading
  • Reference book: the 2012 edition of the International Fuel Gas Code

Retakes

  • We couldn’t confirm the retake rules
  • Your references have to be bound, but you can tab and highlight them
  • Call PSI at 855-557-0616 if you need to reschedule

Books and codes for this exam (open book)

The District of Columbia Journeyman and Master Gas Pipe Fitter exams are open book. You can tab and highlight the reference below and use it during the test, as long as it’s bound.

ReferenceEditionHow it’s used
International Fuel Gas Code (IFGC)2012Allowed in exam

Prep for the District of Columbia gas fitter exam

Our exam prep course, Total Prep and complete bundle for the District of Columbia gas fitter exam. Prices are coming soon.

Books for this exam

Renewing your District of Columbia gas fitter license

Neither Journeyman nor Master Gas Fitters need continuing education in DC. Plumber and gasfitter licenses last up to 2 years and expire on March 31 of even-numbered years. Renewing costs $110 for a journeyman and $155 for a master, and there’s a $50 late fee.

Renewal cycle

Up to 2 years

CE hours

Not required

Renewal fee

$110–$155

Late penalty

$50

Licensed in another state?

There are no DC reciprocity agreements for Journeyman or Master Gas Fitters.

No reciprocity agreements in place

Gas fitters from other states apply as new applicants and sit for the DC exam.

City and county rules in District of Columbia

Because DC is one jurisdiction, the District takes care of both licensing and local rules.

The District

  • Licenses for Journey, Master and Contractor Gas Pipe Fitters
  • Exam pre-approval, through the Board of Industrial Trades
  • Exams, given by PSI

Local rules

  • District agencies handle permits and inspections
  • DC has no separate city or county gas license

Who oversees gas pipe fitters in the District of Columbia

Licensing authority

DC Department of Licensing and Consumer Protection

202-671-4500

dlcp.dc.gov/service/professional-licensing

What the board does

  • Grants Journey, Master and Contractor Gas Pipe Fitter licenses
  • Works with the Board of Industrial Trades, which pre-approves exam candidates
  • Looks over applications and experience

District of Columbia gas fitter license: common questions

How many hours does a DC journeyman gas fitter license take?

You need 8,000 hours over 4 or more years as an apprentice plumber or gasfitter. You can also qualify with a mechanical engineering degree and 2 years of verified experience.

How do you become a master gas pipe fitter in DC?

First log 4 or more years holding a Journeyman Gas Pipe Fitter license. After that, the 75-question Master exam is the last step.

Is the DC gas fitter license exam open book?

Yes, you can use books on both exams. They have to be bound, but tabs and highlighting are fine.

Who runs the DC gas fitter license exam?

PSI does. Once you’re pre-approved, book online at psiexams.com or call 855-557-0616.

Do DC gas fitters need continuing education?

No. DC has no CE requirement for Journeyman or Master Gas Fitters.

Does DC accept an out-of-state gas fitter license?

No. Gas fitters licensed elsewhere start over as new applicants and take the exam, since the District has no reciprocity agreements.

Where this information comes from

  1. DC Department of Licensing and Consumer Protection, Professional Licensing
  2. PSI, Candidate exam scheduling
  3. DC Board of Industrial Trades, Gas Pipe Fitter licensing
  4. DLCP Board of Industrial Trades, fee schedule
  5. PSI Washington D.C. Contractor/Trades Candidate Information Bulletin

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the DC Department of Licensing and Consumer Protection.