District of Columbia Electrician License: Requirements, Exam and How to Apply, District of Columbia Electrician License, District Of Columbia, Journeyman Electrician, Master Electrician, DC Department of Licensing and Consumer Protection (Board of Industrial Trades), how to get a District of Columbia Electrician License, District of Columbia Electrician License requirements, District of Columbia Electrician License exam, District Of Columbia licensing board, District Of Columbia contractor license, license application steps, exam reference books

Home Licenses Electrician License District of Columbia

Electrician License · Journeyman & Master

District of Columbia Electrician License: Requirements, Exam and How to Apply

This guide covers how you become a licensed Journeyman or Master Electrician in DC, including the experience requirement, the open-book exams and the application through the Department of Licensing and Consumer Protection.

Last updated October 27, 2026 from DC Department of Licensing and Consumer Protection requirements

Exam time

4–5 hrs

4 hrs for journeyman, 5 hrs for master

Time to get license

~4 yrs

For journeyman; master takes 4 more licensed years

Continuing ed

Not required

Neither journeyman nor master needs CE

Do you need a District of Columbia electrician license?

Yes. The Department of Licensing and Consumer Protection (DLCP) licenses DC electricians at two levels: Journeyman and Master. If you do electrical work or supervise other electricians in the District, you need the license that fits your role.

You need the license when

  • You do electrical work in the District as a journeyman
  • You oversee what electrical apprentices do
  • You lay out, direct or oversee other electricians’ work (Master license)

Exceptions

  • Apprentices supervised by a licensed electrician while they earn their 8,000 hours
  • Experience in the military, the Merchant Marine or electrical engineering can stand in for apprenticeship hours, though you still need to pass the exam and get licensed

What happens if you work unlicensed

The sources we checked don’t give penalty amounts. DLCP can deny, suspend or act against a license, and it can act against people working unlicensed, so be licensed before you do any electrical work in DC.

How to get a District of Columbia electrician license in 6 steps

  1. Gain your experience First step
    Work 4 years (8,000 hours) as an apprentice under a licensed electrician or master. You can also qualify through military service, or through an electrical engineering degree combined with practical experience.
  2. Get pre-approved for the exam Before applying
    Your first stop is the DC Board of Industrial Trades website: open an account there, then ask to be pre-approved for the exam.
  3. Book with PSI Before test day
    Schedule through PSI or by calling 855-557-0616. There are testing centers across the District.
  4. Pass the exam Test day
    For journeyman, you take either the 80-question DC exam (4 hours) or the NASCLA Electrical exam. For master, you take the 5-hour master exam. You can use books on both.
  5. Apply with DLCP Once you pass
    You can apply on the web via DLCP’s professional licensing service, or you can phone 202-671-4500 instead.
  6. Get your license Once reviewed
    After DLCP approves your application, you can work in the District as a licensed electrician.

District of Columbia electrician application checklist

The District of Columbia application on a single page

  • Proof of 4 years (8,000 hours) as an apprentice, or an approved alternative
  • A Board of Industrial Trades account and exam pre-approval
  • Your PSI exam booked (DC exam or NASCLA)
  • Bound, tabbed copies of the approved references
  • A passing score on the exam
  • Your online application sent to DLCP

District of Columbia electrician license classes

There are two electrician licenses in DC. Most electricians begin as a journeyman and become a master after four years of licensed work.

JRY Most common

Journeyman Electrician

Does electrical work and oversees the work of electrical apprentices.

ExamJourneyman exam or NASCLA
LimitNot stated

MST Supervisor

Master Electrician

Lays out, directs and oversees other electricians’ work.

ExamMaster exam
LimitNot stated

Requirements for each District of Columbia electrician class

Each license calls for experience and a passing score on the exam. The Board can also accept a mix of experience it considers enough.

RequirementJourneymanMaster
Experience4 years (8,000 hours) as an apprentice working under a licensed electrician or master4 years working as a licensed electrician
Military path4 years doing the same kind of work in the Armed Services or Merchant MarineExperience in the Armed Services or Merchant Marine may be counted as equivalent
Education pathA 4-year electrical engineering course and 2 years of hands-on experienceA 4-year electrical engineering course and 2 years of hands-on experience
ExamJourneyman exam (80 questions) or the NASCLA Electrical examMaster exam (5 hours)
Pre-approval for the examRequiredRequired
Continuing educationNot requiredNot required

The District of Columbia electrician exam

If you’re going for journeyman, you can choose the DC exam or the NASCLA Accredited Electrical Exam. You can use books on every DC electrical exam, and your bound references can be tabbed and highlighted.

Format

Open book, on computer

Questions

80 (journeyman)

Passing score

Not stated

Exam vendor

PSI

Scoring and content

  • Journeyman: 4 hours for 80 questions
  • Master: 5 hours long
  • NASCLA Electrical alternative: 270 minutes for 100 questions, and you pass with 75 correct
  • Subjects: special occupancies, motors and generators, wiring methods, branch circuits, feeders and services
  • You’ll use NEC 2011 (NFPA 70) and Ugly’s Electrical References, and every book has to be bound

Retakes

  • We couldn’t confirm the retake rules
  • Before you book, check with PSI at 855-557-0616
  • You need pre-approval before you can schedule
  • Ask whether your pre-approval still applies when you retake

Books and codes for this exam (open book)

The District of Columbia Journeyman and Master Electrician exams are open book. You can tab and highlight the references below and use them during the test, as long as they’re bound.

ReferenceEditionHow it’s used
NFPA 70: National Electrical Code (NEC)2011Allowed in exam
Ugly’s Electrical References2020Allowed in exam

If you take the NASCLA Accredited Electrical Exam instead of the DC exam, check the NASCLA candidate bulletin for its own reference list.

Prep for the District of Columbia electrician exam

Our exam prep course, Total Prep and complete bundle for the District of Columbia electrician exam. Prices are coming soon.

Books for this exam

Renewing your District of Columbia electrician license

Neither journeyman nor master electricians need continuing education in DC. A license lasts up to 2 years and expires on November 30 of odd-numbered years. Renewing costs $110 for a journeyman and $155 for a master, and there’s a $50 late fee.

Renewal cycle

Up to 2 years

CE hours

Not required

Renewal fee

$110–$155

Late penalty

$50

Licensed in another state?

There are no DC reciprocity agreements for journeyman or master electricians.

No reciprocity agreements in place

If another state licensed you, you’ll apply as a new applicant, meet DC’s experience requirements and pass the exam.

City and county rules in District of Columbia

Because DC is one jurisdiction, the District government takes care of licensing as well as permits for each job.

The District

  • Journeyman and master electrician licenses, through DLCP
  • Exam pre-approval, through the Board of Industrial Trades
  • Exams, given by PSI

District permitting

  • Electrical permits for each job
  • Inspecting finished work
  • Business licenses for electrical companies

Who oversees electricians in the District of Columbia

Licensing authority

DC Department of Licensing and Consumer Protection (Board of Industrial Trades)

202-671-4500

dlcp.dc.gov/service/professional-licensing

What the board does

  • Grants journeyman and master electrician licenses
  • Pre-approves applicants for exams
  • Looks over experience, including the military and education paths
  • Oversees the District’s licensed electricians

District of Columbia electrician license: common questions

How many hours does it take to become a journeyman electrician in DC?

You need 4 years (8,000 hours) as an apprentice under a licensed electrician or master. You can also qualify through military service, or through a 4-year electrical engineering course and 2 years of practical work.

How do you become a master electrician in DC?

Pass the 5-hour master exam after logging 4 or more years as a licensed electrician. The Board may also take equivalent experience in place of those years.

Is the DC electrician license exam open book?

Yes. Bring bound references, such as the NEC 2011 and Ugly’s Electrical References, and feel free to tab and highlight them.

Can you take the NASCLA electrical exam instead of the DC exam?

Yes, for the trade exam. You get 270 minutes for the 100 questions on the NASCLA Accredited Electrical Exam, and you pass with 75 correct.

Do DC electricians need continuing education?

No. DC has no CE requirement for journeyman or master electricians.

Does DC accept an out-of-state electrician license?

No. Journeyman and master electricians licensed elsewhere start over as new applicants, since the District has no reciprocity agreements.

Where this information comes from

  1. DC Department of Licensing and Consumer Protection, Professional licensing
  2. PSI, District of Columbia exam catalog
  3. DC Board of Industrial Trades, exam pre-approval
  4. NASCLA Accredited Electrical Exam
  5. DLCP Board of Industrial Trades, fee schedule
  6. PSI Washington D.C. Contractor/Trades Candidate Information Bulletin

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the DC Department of Licensing and Consumer Protection.