
Home Licenses Plumber License Connecticut
Plumber License · P-1 Contractor & P-2 Journeyperson
Connecticut Plumber License: Requirements, Exam and How to Apply
There are two unlimited plumbing license levels in Connecticut: P-2 Journeyperson and P-1 Contractor. This guide covers what each level requires, how the two exams work and how you keep your license.
Last updated October 27, 2026 from Connecticut Department of Consumer Protection requirements
Exam time
5 hrs
A 3-hr trade exam and a 2-hr Business & Law exam
Time to get license
Varies
An apprenticeship for P-2, and then 2 yrs as a journeyperson for P-1
Continuing ed
7 hrs
Every renewal
Do you need a Connecticut plumber license?
Yes. You need a state license for plumbing and piping work in Connecticut, as section 20-330 of the Connecticut General Statutes defines it. An unlimited license covers every type of plumbing work, though a P-2 Journeyperson has to be employed by a licensed contractor.
You need the license when
- A licensed contractor employs you to do plumbing and piping as CGS 20-330 defines it (P-2)
- You own a plumbing business or take on plumbing contracts (P-1)
- You plan to do every type of plumbing work, not just a limited scope
Exceptions
- Apprentices in a registered apprenticeship program
- We couldn’t confirm any other exemptions, so ask the Department before you do work without a license
What happens if you work unlicensed
The sources we checked don’t give penalty amounts. Both the Department of Consumer Protection and the Plumbing and Piping Work Examining Board can act against unlicensed plumbing work, so ask the Department about current penalties.
How to get a Connecticut plumber license in 6 steps
- Complete your apprenticeship First step
Finish a registered apprenticeship program or gain equivalent training and experience. For a P-1, you’ll also need at least 2 years as a licensed journeyperson. - Get pre-approved for the exam Before scheduling
You’ll need to send in a finished application packet to the Department of Consumer Protection. The Plumbing and Piping Work Examining Board page is the place to begin, or you can phone 860-713-6100. - Look for your eligibility postcard Once approved
After approval, you’ll receive an Examination Eligibility postcard that tells you how to pay for and book your exams. - Pass both exams Test day
You’ll sit for the open-book trade exam (3 hours for 80 questions, 70% passes) and the Business & Law exam (2 hours for 50 questions). - Complete your licensing Once you pass
After you pass both exams, you’ll receive a passing letter that explains how to finish getting your license. - Stay current on CE Every renewal
Finish 7 hours of continuing education ahead of each renewal.
Connecticut plumber application checklist
Connecticut’s application on a single page
- A finished registered apprenticeship, or equivalent training and experience
- For a P-1: 2+ years as a licensed unlimited journeyperson
- A finished application packet for exam pre-approval
- Your Examination Eligibility postcard
- Passing scores on both the trade exam and Business & Law
Connecticut plumber license classes
Every kind of plumbing and piping work is covered by Connecticut’s unlimited plumbing licenses. What sets them apart is whether you can work independently.
P-2 First license
Unlimited Journeyperson Plumber
Covers every kind of plumbing and piping work under CGS 20-330, as long as a contractor licensed for that work employs you.
| Exam | Trade + Business & Law |
| Limit | Works for a P-1 |
P-1 Own a business
Unlimited Plumbing Contractor
Covers every kind of plumbing and piping work under CGS 20-330, and lets you take on contracts and run your own shop.
| Exam | Trade + Business & Law |
| Limit | Unlimited |
Requirements for each Connecticut plumber class
Everyone starts with the P-2 Journeyperson license. Once you’ve been a licensed journeyperson for at least 2 years, you can qualify for the P-1 Contractor license.
| Requirement | P-2 Journeyperson | P-1 Contractor |
|---|---|---|
| Experience | A registered apprenticeship, or equivalent training and experience | 2+ yrs licensed as an unlimited journeyperson, or the equivalent |
| Trade exam | 80 questions in 3 hrs | 80 questions in 3 hrs |
| Business & Law exam | 50 questions in 2 hrs | 50 questions in 2 hrs |
| Pre-approval for the exam | Required | Required |
| Your employer | A licensed contractor employs you | You or your own company |
| Continuing education | 7 hrs every renewal | 7 hrs every renewal |
The Connecticut plumber exam
There are two exams to pass: the unlimited plumbing trade exam and the Business & Law exam. You can use books on the trade exam, so it pays to know your way around the references.
Format
Open book
Questions
80 trade + 50 B&L questions
Passing score
70%
Exam vendor
PSI
Scoring and content
- Trade exam: 3 hours for 80 questions, 70% passes
- Trade exam subjects include water supply, water heaters, water treatment, gas systems, backflow, DWV and isometric analysis
- Business & Law: 2 hours for 50 questions on contracts, lien law, licensing, and tax and labor laws
- You can use trade references such as the 2021 IPC, NFPA 54, NFPA 56, NFPA 58 and OSHA 1926
- For Business & Law, the reference is NASCLA’s 6th edition Contractors Guide to Business, Law and Project Management
Retakes
- We couldn’t confirm the retake rules
- The eligibility postcard tells you how to pay and book
- You can’t be licensed until you’ve passed both exams
- PSI charges $59 per exam portion, whether it’s your first try or a retake
Books and codes for this exam (open book)
The P-1 and P-2 plumbing exam is open book, so you can bring the approved references below into your test. The list covers the P-1/P-2 trade exam and the Business and Law exam for contractors; books marked study only aren’t allowed in the exam room.
| Reference | Edition | How it’s used |
|---|---|---|
| International Plumbing Code (IPC) | 2021 | Allowed in exam |
| NFPA 54: National Fuel Gas Code | 2012 | Allowed in exam |
| NFPA 58: Liquefied Petroleum Gas Code | 2014 | Allowed in exam |
| NFPA 56: Standard for Fire and Explosion Prevention During Cleaning and Purging of Flammable Gas Piping Systems | 2020 | Allowed in exam |
| OSHA 29 CFR 1926 Construction Industry Regulations | Not stated | Allowed in exam |
| Water Processing: Residential, Commercial, Light Industrial | Not stated | Allowed in exam |
| NASCLA Contractor’s Guide to Business, Law and Project Management — Business and Law exam | 6th edition | Allowed in exam |
| Mathematics for Plumbers and Pipefitters | 8th edition | Study only |
| Plumbing Design and Installation | Not stated | Study only |
Prep for the Connecticut plumber exam
Our exam prep course, Total Prep and complete bundle for the Connecticut plumber exam. Prices are coming soon.
Books for this exam
-

2021 International Plumbing Code
Price coming soon -

Mathematics for Plumbers and Pipefitters, 8th edition
Price coming soon -

NASCLA Contractors Guide to Business, Law and Project Management, Connecticut 6th Edition
Price coming soon -

NFPA 54/ANSI Z223.1, National Fuel Gas Code, 2012
Price coming soon -

NFPA 58: Liquefied Petroleum Gas Code, 2014
Price coming soon -

Plumbing: Design and Installation
Price coming soon -

Water Processing: Residential, Commercial, Light-Industrial (Third Edition)
Price coming soon -

Book Tabs
Price coming soon
Renewing your Connecticut plumber license
Each renewal requires Connecticut plumbers to finish 7 hours of continuing education. Plumbing and pipefitting licenses expire each year on October 31. Renewing costs $150 for a contractor and $120 for a journeyperson. We couldn’t confirm a late penalty, so check with the Department.
Renewal cycle
Every year (Oct 31)
CE hours
7 every renewal
Renewal fee
$150 for P-1, $120 for P-2
Late penalty
Not stated
Connecticut plumber CE
Hours, deadlines, required topics and the renewal steps, in one guide.
Licensed in another state?
There are no reciprocity agreements for Connecticut plumbing licenses.
No reciprocity agreements in place
You can’t transfer a plumbing license from another state. You’ll apply as a new applicant, get pre-approved for the exams and pass both of them.
City and county rules in Connecticut
The state issues your plumbing license, but towns take care of the job-site side.
The state
- The P-1 and P-2 unlimited plumbing licenses
- Exam pre-approval and eligibility
- Continuing education rules
- Disciplining licensees
Cities and counties
- Plumbing permits
- Inspections
- Local business rules
Who oversees plumbers in Connecticut
Licensing authority
Connecticut Department of Consumer Protection, Plumbing and Piping Work Examining Board
860-713-6100
What the board does
- Grants the P-1 and P-2 unlimited plumbing licenses
- Looks over applications and pre-approves applicants for exams
- Sets the 7-hour CE rule for renewal
- Enforces plumbing and piping licensing under CGS 20-330
Connecticut plumber license: common questions
How is a Connecticut P-1 plumbing license different from a P-2?
Each one covers every kind of plumbing and piping work. A P-2 Journeyperson has to be employed by a licensed contractor, but a P-1 Contractor can run a business.
How do you qualify for the Connecticut P-2 plumbing exam?
Finish a registered apprenticeship program or have equivalent training and experience. Then get pre-approved for the exam by the Department of Consumer Protection.
How do you get a Connecticut P-1 Contractor plumbing license?
You need passing scores on both the trade exam and the Business & Law exam, plus at least 2 years as an unlimited licensed journeyperson (or equivalent training and experience).
Is the Connecticut plumber license exam open book?
Yes. You can use books on the trade exam, which gives you 3 hours for 80 questions, and 70% passes. There’s also a 50-question Business & Law exam.
Does Connecticut offer reciprocity for plumber licenses?
No. There are no reciprocity agreements for Connecticut plumbing licenses, so plumbers from other states apply as new applicants.
How many CE hours do Connecticut plumbers need?
You need 7 hours every renewal.
Where this information comes from
- Connecticut Department of Consumer Protection, Plumbing and Piping Work Examining Board
- Connecticut General Statutes § 20-330, plumbing and piping work definitions
- Connecticut P-1/P-2 unlimited plumbing and Business & Law exam information
- Connecticut DCP, Plumbing and Pipefitting license fees
- PSI, Connecticut Plumbing Trades candidate information bulletin
Last updated October 27, 2026. Spot something out of date? Tell us.
Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Connecticut Department of Consumer Protection.