Connecticut Business and Law Exam: Format and How to Pass, Connecticut Business and Law Exam, Connecticut, Electrical Contractor, Plumbing Contractor, HVAC Contractor, Heating & Cooling Contractor, Connecticut Department of Consumer Protection (DCP), how to get a Connecticut Business and Law Exam, Connecticut Business and Law Exam requirements, Connecticut Business and Law Exam exam, Connecticut licensing board, Connecticut contractor license, license application steps, exam reference books, B&L + trade, Pre-approval, Experience or schooling, Questions

Home Licenses Business and Law Exam Connecticut

Business and Law Exam · Contractor Licenses

Connecticut Business and Law Exam: Format and How to Pass

On top of a trade exam, most contractors in Connecticut also have to pass the Business and Law exam. Here you’ll learn who needs it, what it covers and where it fits in the Department of Consumer Protection licensing process.

Last updated October 27, 2026 from Connecticut Department of Consumer Protection requirements

Exam time

2 hrs

50 questions; open book

Time to get license

Varies

Set by the experience or education your license calls for

Continuing ed

Not stated

Ask DCP about your license type

Who has to pass the Connecticut business and law exam?

Probably. Almost every Connecticut contractor license calls for it, and you take it alongside your license’s trade exam. Passing it gets you closer to a license, but it isn’t a license on its own.

You need the license when

  • People applying for almost any Connecticut contractor license
  • Contractors in electrical, plumbing, HVAC, and heating and cooling
  • People the Department of Consumer Protection has approved to sit for the exam

Exceptions

  • The board grants reciprocity only at its discretion
  • Each license has its own experience and education rules, so look up yours

Contracting without a license

A passing score doesn’t mean you can start contracting. The Department of Consumer Protection has to issue your license first, and the state can take action against unlicensed work.

How to sign up for the Connecticut business and law exam

  1. Confirm your license type Before applying
    Check that your experience or education meets the requirement for your license. The requirement differs from trade to trade.
  2. Send your application to DCP Before booking
    File your Application for Contractors License with the Department of Consumer Protection. That filing is what gets you pre-approved for testing.
  3. Receive your test assignment Once approved
    When your application is accepted, the state assigns you a nearby test center, plus a date and time.
  4. Pass both exams: Business and Law plus your trade Test day
    You get 2 hours for the 50 Business and Law questions, the exam is open book, and the passing score is 70%. Only bound references are allowed.
  5. Secure bonds and insurance Once you pass
    Arrange whatever bonds and liability insurance your license calls for.
  6. Get your license Last step
    Complete your DCP application to receive your Connecticut contractor license.

Connecticut business and law exam application checklist

Connecticut’s application on a single page

  • Experience or education that meets your license type
  • Application for Contractors License on file with DCP
  • A bound, tabbed Business and Law reference
  • A passing score on Business and Law (70%) and on your trade exam
  • Any bonds and liability insurance you need

Connecticut licenses that need the business and law exam

Almost every contractor license in Connecticut calls for the Business and Law exam, and each one comes with a separate trade exam too.

ELEC Trade

Electrical Contractor

You take Business and Law along with the electrical contractor trade exam.

ExamB&L + trade
LimitNot stated

PLMB Trade

Plumbing Contractor

You take Business and Law along with the plumbing contractor trade exam.

ExamB&L + trade
LimitNot stated

HVAC Trade

HVAC Contractor

You take Business and Law along with the HVAC contractor trade exam.

ExamB&L + trade
LimitNot stated

H&C Trade

Heating & Cooling Contractor

You take Business and Law along with the heating and cooling contractor trade exam.

ExamB&L + trade
LimitNot stated

Before you can sit for the business and law exam

Applying for your contractor license is how you get approved to test. After approval, the state gives you a test center, date and time.

RequirementBusiness and Law examTrade exam
Pre-approvalApplication for Contractors License (filed with DCP)Application for Contractors License (filed with DCP)
Experience or schoolingWhat your license type requiresWhat your license type requires
Questions50Depends on the trade
Time2 hoursDepends on the trade
Score to pass70%Not stated
FormatOpen book; references must be boundNot stated

Inside the Connecticut business and law exam

You’ll have 2 hours to answer 50 questions on the Connecticut Business and Law exam. You can use references, but every one has to be bound.

Format

Open book

Questions

50

Passing score

70%

Exam vendor

PSI

Scoring & content

  • 50 questions in 2 hours; 70% passes
  • It tests you on lien law, licensing, tax and labor laws, financial management, and estimating and bidding
  • It also covers business organization, contracts, risk management, project management, and environmental and safety topics
  • The exam’s reference is the 6th edition of NASCLA’s Connecticut book, the Contractors Guide to Business, Law and Project Management
  • You can tab and highlight references, but they have to be bound

Retakes

  • Any portion you pass is good for 2 years, so you only retake the one you failed
  • PSI charges $59 per exam portion, whether it’s your first try or a retake
  • A failed exam can push back when you’re able to work under your license

Books and codes for this exam (open book)

The Connecticut Business and Law exam is open book: you can tab, highlight and use the reference below during the test, as long as it’s bound. This exam is required alongside the trade exam for nearly every Connecticut contractor license.

ReferenceEditionHow it’s used
NASCLA Contractor’s Guide to Business, Law and Project Management6th editionAllowed in exam

Prep for the Connecticut business and law exam

Our exam prep course, Total Prep and complete bundle for the Connecticut business and law exam. Prices are coming soon.

Books for this exam

After you pass the business and law exam

The exam itself never needs renewing. After you’re licensed, you renew your contractor license each year for $150. Your expiration date is set by your trade: for example, September 30 for electrical, August 31 for heating and cooling, and October 31 for plumbing.

Renewal cycle

Every year

CE hours

Not stated

Renewal fee

$150 (contractor license)

Late penalty

Not stated

Licensed in another state?

There’s no published standing reciprocity for this exam in Connecticut. The board decides any reciprocity at its discretion.

No reciprocity agreements in place

The board grants reciprocity only at its discretion. Unless DCP says otherwise, expect to apply as a new applicant and sit for both exams.

City and county rules in Connecticut

At the state level, the Department of Consumer Protection runs contractor licensing and the Business and Law exam.

The state

  • Applications for contractor licenses
  • Exam approval and test assignments
  • Reciprocity calls

Cities and counties

  • Building permits and inspections
  • Local business rules

Who oversees contractor licensing in Connecticut

Licensing authority

Connecticut Department of Consumer Protection (DCP)

portal.ct.gov/DCP

What the board does

  • Accepts contractor license applications and approves people to test
  • Sets the experience and education rules for each license type
  • Reviews reciprocity requests one at a time
  • Grants contractor licenses

Connecticut business and law exam: common questions

Can you use books on the Connecticut Business and Law exam?

Yes. Your references can be tabbed and highlighted, as long as they’re bound.

How many questions are on the Connecticut Business and Law exam?

There are 50 questions, and you get 2 hours.

What’s the passing score on the Connecticut Business and Law exam?

You need 70%.

Who needs to pass the Connecticut Business and Law exam?

People applying for almost any Connecticut contractor license. They take it along with the trade exam for their license.

How do you get approved for the Connecticut Business and Law exam?

Send the Department of Consumer Protection your Application for Contractors License. When the state accepts it, you’ll be given a test center, a date and a time.

Does Connecticut accept an out-of-state contractor license?

Only if the board decides to. Reciprocity isn’t automatic, so expect to apply as a new applicant.

Where this information comes from

  1. Connecticut Department of Consumer Protection
  2. DCP, Application for Contractors License
  3. NASCLA Contractors Guide to Business, Law and Project Management, Connecticut 6th Edition
  4. Connecticut DCP, Electrical license fees
  5. Connecticut DCP, Heating, Cooling and Sheet Metal Work license fees
  6. Connecticut DCP, Plumbing and Pipefitting license fees
  7. PSI, Connecticut Electrical Trades candidate information bulletin

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Connecticut Department of Consumer Protection.