
Home Licenses Gas Fitter License Connecticut
Limited Gas & Oil Burner · Journeyperson & Contractor
Connecticut Gas Fitter License: Requirements, Exam and How to Apply
In Connecticut, gas burner work falls under four Limited Gas and Oil Burner classes, B-1 through B-4, and the Department of Consumer Protection issues them. Below you’ll see which class matches your work, how many training hours it takes, how the PSI exams work and how to apply.
Last updated October 27, 2026 from Connecticut Department of Consumer Protection requirements
Exam time
1–2 hrs
1 hr for B-4, 1.5 hrs for B-2, 2 hrs for B-1
Time to get license
Varies
2,000–4,000 hours on the job; contractors also need 2 yrs as a journeyperson
Continuing ed
Not required
You don’t need CE to renew
Do you need a Connecticut gas fitter license?
Yes. In Connecticut, you need a Limited Gas and Oil Burner license to install, service or repair gas or oil burners. The right class comes down to the size of the burner and whether you work on your own or for a licensed contractor.
You need the license when
- Your work is to install, service or repair gas or oil burners
- Your jobs involve burners for domestic or light commercial use that burn 5 gallons or less per hour (B-1 or B-2)
- Your work is on gas or oil fired burners of any size (B-3 or B-4)
- You own the business and take on the contracts (B-1 or B-3 contractor)
Exceptions
- B-2 and B-4 journeypersons have to be on the payroll of a contractor licensed for the same work
- We couldn’t confirm any other exemptions, so ask the Department of Consumer Protection before you count on one
What happens if you work unlicensed
The Department of Consumer Protection licenses gas and oil burner work and can discipline anyone who does it without a license. Before you accept a job, be sure your license class fits the burners involved.
How to get a Connecticut gas fitter license in 6 steps
- Choose your class First step
Pick B-1 or B-2 for burners rated at 5 gallons or less per hour, or B-3 or B-4 for any gas or oil fired burner. You’ll need a journeyperson license before you can go for a contractor class (B-1, B-3). - Finish your training 2,000–4,000 hrs
Either complete a CT Department of Labor apprenticeship or document your hours: 2,000 on the job plus 288 in the classroom for B-2, or 4,000 on the job plus 360 in the classroom for B-4. - Collect your paperwork Before applying
If you didn’t go through a state apprenticeship, you’ll need employer letters that are dated, notarized and on company letterhead. They should give your employment dates and describe your training in detail. Contractor applicants also include a copy of their journeyperson license and its first-issue date. - Apply with the Department of Consumer Protection Before testing
You can start from the heating, cooling and sheet metal licensing page at DCP, or phone 800-842-2649. - Pass the PSI exams Test day
Book at psiexams.com or by calling (855) 746-8171. You can use books on the exams. Contractor applicants must pass the CT Business & Law exam too. - Get your license From DCP
After you pass, DCP issues your license: B-1, B-2, B-3 or B-4.
Connecticut gas fitter application checklist
Connecticut’s application on a single page
- Choose B-1, B-2, B-3 or B-4
- A CT DOL apprenticeship, or records of your on-the-job and classroom hours
- Employer letters, notarized and on company letterhead
- A journeyperson license held for 2+ years (for contractors)
- A passing score on the PSI trade exam
- A passing score on the CT Business & Law exam (for contractors)
Connecticut gas fitter license classes
Domestic and light commercial burners (5 gallons or less per hour) fall under the B-1 and B-2. Any gas or oil fired burner falls under the B-3 and B-4. Journeypersons are employed by a licensed contractor.
B-2 Starting level
Limited Journeyperson
For domestic and light commercial gas or oil burners: you install, service and repair them, employed by a licensed contractor.
| Exam | B-2 exam |
| Limit | 5 gal/hr or less |
B-1 Contractor
Limited Contractor
Installs, services and repairs gas or oil burners for domestic and light commercial use.
| Exam | B-1 + Business & Law |
| Limit | 5 gal/hr or less |
B-4 Any burner
Journeyperson
Installs, services and repairs gas or oil fired burners of any kind while a licensed contractor employs you.
| Exam | B-4 exam |
| Limit | Any size |
B-3 Highest contractor level
Contractor
Installs, services and repairs gas or oil fired burners of any kind.
| Exam | B-3 + Business & Law |
| Limit | Any size |
Requirements for each Connecticut gas fitter class
You can qualify as a journeyperson through a state apprenticeship or by documenting your training hours. To be a contractor, you first need to hold a journeyperson license for 2 years.
| Requirement | B-2 Journeyperson | B-4 Journeyperson | B-1 / B-3 Contractor |
|---|---|---|---|
| Apprenticeship path | CT Department of Labor apprenticeship | CT Department of Labor apprenticeship | Doesn’t apply |
| On-the-job training | 2,000 hours | 4,000 hours | A journeyperson license held for 2 years |
| Hours in the classroom | 288 | 360 | Not stated |
| Employer letters | Notarized and on letterhead (if you didn’t apprentice) | Notarized and on letterhead (if you didn’t apprentice) | A copy of your journeyperson license and its first-issue date |
| Exams | B-2 exam | B-4 exam | B-1 or B-3 exam and the CT Business & Law exam |
The Connecticut gas fitter exam
There’s a separate open-book trade exam for each class, and contractor applicants also take the Connecticut Business & Law exam. The approved references can be tabbed and highlighted, and you can use them while you test.
Format
Open book
Questions
30–50, depending on class
Passing score
70%
Exam vendor
PSI
Scoring and content
- B-1: 2 hours for 50 questions, 70% passes
- B-2: 1.5 hours for 40 questions
- B-4: 1 hour for 30 questions; we couldn’t confirm how many questions the B-3 has
- Subjects: oil burners, fuel gas systems, controls, equipment, piping and valves, chimneys, flues and vents, and testing and maintenance
- You’ll use the 2021 IMC and IRC, NFPA 31, NFPA 54 and NFPA 58 as references, and B-1 and B-2 candidates also use the 2021 IFGC
Retakes
- We couldn’t confirm a waiting period before a retake
- PSI charges $59 per exam portion, whether it’s your first try or a retake
- Book or rebook with PSI at (855) 746-8171
- If you’re applying as a contractor, you have to pass the trade exam and Business & Law
Books and codes for this exam (open book)
The Connecticut B-1, B-2, B-3 and B-4 limited gas and oil burner exams are open book: you can tab, highlight and use the references below during the test. The International Fuel Gas Code applies only to the B-1 and B-2 exams, and contractor applicants also take the open-book Business and Law exam.
| Reference | Edition | How it’s used |
|---|---|---|
| International Mechanical Code (IMC) | 2021 | Allowed in exam |
| International Residential Code (IRC) | 2021 | Allowed in exam |
| International Fuel Gas Code (IFGC) — B-1/B-2 exams | 2021 | Allowed in exam |
| NFPA 31: Standard for the Installation of Oil-Burning Equipment | 2011 | Allowed in exam |
| NFPA 54: National Fuel Gas Code | 2012 | Allowed in exam |
| NFPA 58: Liquefied Petroleum Gas Code | 2014 | Allowed in exam |
| NASCLA Contractor’s Guide to Business, Law and Project Management — Business and Law exam | 6th edition | Allowed in exam |
Prep for the Connecticut gas fitter exam
Our exam prep course, Total Prep and complete bundle for the Connecticut gas fitter exam. Prices are coming soon.
Books for this exam
-

2021 International Fuel Gas Code
Price coming soon -

2021 International Mechanical Code
Price coming soon -

2021 International Residential Code
Price coming soon -

NASCLA Contractors Guide to Business, Law and Project Management, Connecticut 6th Edition
Price coming soon -

NFPA 31, Standard for the Installation of Oil-Burning Equipment, 2011
Price coming soon -

NFPA 54/ANSI Z223.1, National Fuel Gas Code, 2012
Price coming soon -

NFPA 58: Liquefied Petroleum Gas Code, 2014
Price coming soon -

Book Tabs
Price coming soon
Renewing your Connecticut gas fitter license
You don’t need any continuing education to renew a Connecticut Limited Gas and Oil Burner license. Like other heating, piping and cooling licenses, it expires each year on August 31. Renewing costs $150 for a contractor and $120 for a journeyperson.
Renewal cycle
Every year (Aug 31)
CE hours
Not required
Renewal fee
$150 for contractors, $120 for journeypersons
Late penalty
Not stated
Licensed in another state?
Connecticut may offer reciprocity to licensing boards whose standards are at least as strict as the ones its own board sets. Ask the board for details.
Other states: reviewed case by case
This can happen when another board’s standards meet Connecticut’s minimum. Talk to DCP before you apply.
Out-of-state contractors: the experience path
With an out-of-state Heating & Cooling Contractor license, you can qualify for the B-1 or B-3 exam by sending a work history that covers your journeyperson years and 2 more years, along with notarized employer letters.
City and county rules in Connecticut
The state issues your license, and it’s good anywhere in Connecticut. Permits and inspections on each job are still up to local building officials.
The state
- The B-1 through B-4 licenses
- Reviewing training and experience
- Approving you for the PSI exams
- Renewals and discipline
Cities and counties
- Permits for gas piping and burner work, where they’re required
- Inspections
- Enforcing local codes
Who oversees gas and oil burner technicians in Connecticut
What the board does
- Grants the B-1, B-2, B-3 and B-4 Limited Gas and Oil Burner licenses
- Looks over apprenticeship, training and experience records
- Clears applicants to take the PSI exams
- Reviews reciprocity requests from other boards
Connecticut gas fitter license: common questions
Is there a gas fitter license in Connecticut?
In Connecticut, gas burner work is covered by the B-1 through B-4 Limited Gas and Oil Burner licenses, which the Department of Consumer Protection issues.
How do Connecticut’s B-1/B-2 gas burner licenses differ from B-3/B-4?
The B-1 and B-2 are for domestic and light commercial burners that use 5 gallons or less per hour. The B-3 and B-4 are for gas or oil fired burners of any kind.
How many training hours do you need for a Connecticut gas burner license?
A B-2 takes 2,000 hours on the job and 288 in the classroom. A B-4 takes 4,000 hours on the job and 360 in the classroom. Finishing a CT Department of Labor apprenticeship counts too.
Is the Connecticut gas and oil burner exam open book?
Yes, you can use books on every trade exam. On the B-1, you get 2 hours for 50 questions, and the passing score is 70%.
Do Connecticut gas burner contractors take a Business and Law exam?
Yes. After holding a journeyperson license for at least 2 years, B-1 and B-3 contractor applicants must also pass the Connecticut Business & Law exam.
Do you need continuing education for a Connecticut gas burner license?
No. You can renew this Connecticut license without any continuing education.
Can you transfer an out-of-state gas burner license to Connecticut?
It might be. If another board meets Connecticut’s minimum standards, reciprocity is an option. DCP can tell you more.
Where this information comes from
- Connecticut Department of Consumer Protection, Heating, Cooling and Sheet Metal Work licenses
- PSI, Connecticut occupational trades exams
- Connecticut Department of Labor, apprenticeship program
- Connecticut DCP, Heating, Cooling and Sheet Metal Work license fees
- PSI, Connecticut Heating, Piping and Cooling Trades candidate information bulletin
Last updated October 27, 2026. Spot something out of date? Tell us.
Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Connecticut Department of Consumer Protection.