
Home Licenses HVAC License Connecticut
HVAC License · Journeyperson & Contractor
Connecticut HVAC License: Requirements, Exam and How to Apply
In Connecticut, heating and cooling work is divided into unlimited and limited classes, and each class has a journeyperson license and a contractor license. Below, we cover each class, the training hours, the PSI exams and the application.
Last updated October 27, 2026 from Connecticut Department of Consumer Protection requirements
Exam time
Varies
The trade exam runs 1.5–3 hrs; contractors also take a 2-hr Business & Law exam
Time to get license
Varies
Journeypersons need 4,000–8,000 hours on the job; contractors need 2 yrs more
Continuing ed
Not required
You can renew without CE
Do you need a Connecticut HVAC license?
Yes. The Department of Consumer Protection licenses heating, piping and cooling work in Connecticut. A journeyperson can only work when a licensed contractor employs them, and running your own heating and cooling business takes a contractor license.
You need the license when
- Your jobs involve refrigeration, air conditioning or warm air systems, whether you install, fix, replace, maintain or change them
- Your jobs involve steam or hot water heating systems
- Your heating work includes installing or servicing gas piping, gas burners or oil burners
- You plan to take on heating and cooling contracts yourself (contractor license)
- Section 20-330 of the Connecticut General Statutes defines heating, piping and cooling work, and that’s the work you do
Exceptions
- People training under licensed workers toward a journeyperson license through an apprenticeship registered with the CT Department of Labor
- We couldn’t confirm any other exemptions, so ask the Department of Consumer Protection before you start a job
What happens if you work unlicensed
The sources we checked don’t give fine amounts. The Department of Consumer Protection can deny, discipline or act against anyone working beyond what their license allows, so check that your class covers a job before you begin.
How to get a Connecticut HVAC license in 6 steps
- Choose your class First step
Pick the license pair for your work: S-1/S-2, S-9/S-10, S-7/S-8, S-5/S-6 or D-1/D-2. If you go limited, there are caps on burner work, boiler size and how tall the building can be. - Finish your training Before applying
You have two options. Complete an apprenticeship through the CT Department of Labor, or record the job and classroom hours for your class (say, 4,000 and 432 for D-2, or 8,000 and 576 for S-8). - Collect your paperwork Before applying
You’ll need employer letters that are dated, notarized and on company letterhead, showing your employment dates and describing your work in detail. If you’re applying as a contractor, include a copy of your journeyperson license and its first-issue date. - Apply with the Department of Consumer Protection Getting approved to test
Send in your application through the Department of Consumer Protection. After approval, you’ll receive an Examination Eligibility postcard explaining how to pay and book. - Pass the PSI exams Test day
Book through PSI or by calling (855) 746-8171. You can use books on all the trade exams, and 70% passes. If you’re applying as a contractor, you must also pass the Connecticut Business & Law exam. - Complete your licensing Once you pass
After you pass, you’ll receive a passing letter that tells you how to finish getting licensed through the Department of Consumer Protection.
Connecticut HVAC application checklist
Connecticut’s application on a single page
- Choose your class (S-1/S-2, S-5 to S-10, or D-1/D-2)
- A CT Department of Labor apprenticeship, or records of your on-the-job and classroom hours
- Employer letters, notarized and on company letterhead
- A copy of your journeyperson license (for contractor applicants)
- A passing score on the PSI trade exam
- A passing score on Business & Law (for contractor applicants)
Connecticut HVAC license classes
Every class has two licenses: a contractor license and a journeyperson license, which only allows you to work for a licensed contractor. Choose the class that fits the systems you work on.
S-1 / S-2 Widest scope
Unlimited Heating, Piping & Cooling
Covers every kind of heating, piping and cooling work under CGS § 20-330. An S-2 journeyperson has to work for a licensed contractor.
| Exam | S-1: 80 Qs + B&L |
| Limit | Unlimited |
S-9 / S-10 Heating and cooling
Limited Heating & Cooling
Steam or hot water heating to 500,000 BTU and 15 lbs steam (buildings no taller than 3 stories), cooling to 35 tons a system, oil burners to 5 gal/hr, plus the LP or natural gas piping that goes with that work.
| Exam | S-9: 80 Qs + B&L; S-10: 70 Qs |
| Limit | 500,000 BTU / 35 tons |
S-7 / S-8 Heating only
Limited Heating
Steam or hot water heating to 500,000 BTU and 15 lbs steam (buildings no taller than 3 stories), plus oil burners to 5 gal/hr and the gas piping and burners that go with that work.
| Exam | S-7: 60 Qs + B&L; S-8: 50 Qs |
| Limit | 500,000 BTU |
S-5 / S-6 No burners
Limited Heating, Hot Water & Steam
Covers hot water or steam heating of up to 500,000 BTU and 15 lbs steam in buildings of up to 3 stories. Oil burners of any size are not included.
| Exam | S-6: 40 Qs; S-5: trade + B&L |
| Limit | 500,000 BTU |
D-1 / D-2 Air side
Limited Warm Air, A/C & Refrigeration
Covers warm air, air conditioning and refrigeration systems, plus the piping for heating or cooling media and the pumps that go with it. Oil burners of any size are not included.
| Exam | D-1: 70 Qs + B&L; D-2: 60 Qs |
| Limit | No oil burners |
Requirements for each Connecticut HVAC class
To qualify as a journeyperson, you complete a CT Department of Labor apprenticeship or document your training. Contractors add 2 years as a licensed journeyperson and pass a second exam.
| Requirement | Journeyperson (S-2, S-6, S-8, S-10, D-2) | Contractor (S-1, S-5, S-7, S-9, D-1) |
|---|---|---|
| How you train | Either an apprenticeship with the CT Department of Labor, or proof of related instruction plus notarized letters from employers | A journeyperson license held at least 2 years, or equivalent training and experience |
| Hours on the job (without an apprenticeship) | 4,000 (D-2) · 6,000 (S-10) · 8,000 (S-6, S-8) · Not stated (S-2) | Met by your journeyperson license |
| Hours in the classroom (without an apprenticeship) | 432 (D-2) · 576 (S-6, S-8, S-10) · Not stated (S-2) | Met by your journeyperson license |
| Path for out-of-state contractors | Doesn’t apply | A work history covering your journeyperson years and 2 more years, along with notarized employer letters |
| Trade exam | Yes; open book, 70% passes | Yes; open book, 70% passes |
| Business & Law exam | Not required | Required |
| Your employer | A licensed contractor only | You run your own business |
| Continuing education | Not required | Not required |
The Connecticut HVAC exam
PSI gives a separate open-book trade exam for each class, and contractor applicants add the Connecticut Business & Law exam. The approved references can be tabbed and highlighted, so it pays to know your way around them.
Format
Open book
Questions
40–80 + 50 B&L
Passing score
70%
Exam vendor
PSI
Scoring and content
- S-1 and S-9 contractor exams: 3 hours for 80 questions
- D-1 contractor: 3 hours for 70 questions. S-7 contractor: 2 hours for 60 questions
- Journeyperson exams: 70 questions for S-10, 60 for D-2 (2 hours), 50 for S-8 and 40 for S-6 (1.5 hours)
- Business & Law: 2 hours for 50 questions on tax and labor law, estimating, contracts, lien law and licensing
- You’ll use references such as the 2021 International Mechanical Code and the NFPA fuel gas and LP gas codes, and you can tab and highlight them
Retakes
- We couldn’t confirm the retake rules
- A retake costs $59 per exam portion, just like your first try
- Wait before retaking: Not stated
- Read the PSI candidate bulletin before you book a retake
Books and codes for this exam (open book)
Connecticut’s heating and cooling trade exams are open book, and the approved references can be tabbed, highlighted and brought into your test. This list covers the S-1/S-2, S-5/S-6, S-7/S-8, S-9/S-10 and D-1/D-2 exams plus the contractor Business and Law exam; books marked study only aren’t allowed in the exam room.
An ACCA duct calculation slide rule is also on the permitted list for the S-1/S-2, S-9/S-10 and D-1/D-2 exams.
Prep for the Connecticut HVAC exam
Our exam prep course, Total Prep and complete bundle for the Connecticut HVAC exam. Prices are coming soon.
Books for this exam
-

2021 International Mechanical Code
Price coming soon -

2021 International Residential Code
Price coming soon -

HVAC Duct Construction Standards: Metal and Flexible, 4th Edition
Price coming soon -

Manual J: Residential Load Calculation, 8th edition
Price coming soon -

Manual N: Commercial Load Calculation, 5th edition
Price coming soon -

Modern Hydronic Heating and Cooling: For Residential and Light Commercial Buildings, 4th edition
Price coming soon -

Modern Refrigeration and Air Conditioning
Price coming soon -

NASCLA Contractors Guide to Business, Law and Project Management, Connecticut 6th Edition
Price coming soon -

NFPA 31, Standard for the Installation of Oil-Burning Equipment, 2011
Price coming soon -

NFPA 54, National Fuel Gas Code, 2015 Edition
Price coming soon -

NFPA 54/ANSI Z223.1, National Fuel Gas Code, 2012
Price coming soon -

NFPA 58: Liquefied Petroleum Gas Code, 2014
Price coming soon -

Pipefitters Handbook
Price coming soon -

Residential Oil Burners, 3rd Edition
Price coming soon -

Steam Plant Operation
Price coming soon -

Book Tabs
Price coming soon
Renewing your Connecticut HVAC license
You can renew a Connecticut heating and cooling license without continuing education. These heating, piping and cooling licenses expire each year on August 31. Renewing costs $150 for a contractor and $120 for a journeyperson.
Renewal cycle
Every year (Aug 31)
CE hours
Not required
Renewal fee
$150 for contractors, $120 for journeypersons
Late penalty
Not stated
Licensed in another state?
If another board’s standards match Connecticut’s, the state may recognize its licenses, but each case is decided on its own. Ask the board before you apply.
Other state boards: recognition possible, case by case
Reciprocity may be possible for the limited classes with boards that meet Connecticut’s minimum standards. Ask the Department of Consumer Protection about your state.
Out-of-state contractors: a path to the contractor exam
If another state licensed you as a heating and cooling contractor, notarized employer letters, your work history and 2 more years of experience can get you approved for the contractor exam.
S-1 / S-2: no agreements listed
We couldn’t confirm any reciprocity agreements for the unlimited class, so expect to apply as a new applicant and sit for the exams.
City and county rules in Connecticut
The state issues your heating and cooling license, and it’s good across Connecticut. Permits and inspections for each job are still up to the town.
The state
- Journeyperson and contractor licenses in every class
- Exam approval, with PSI giving the exams
- What each license covers and its limits
- Renewals and discipline
Cities and counties
- Mechanical and building permits
- Inspecting finished work
- Local permit rules
Who oversees HVAC contractors in Connecticut
Licensing authority
Connecticut Department of Consumer Protection
800-842-2649 (limited heating & cooling licenses)
860-713-6100 (unlimited S-1/S-2, per the sources we checked)
What the board does
- Grants and renews heating, piping and cooling licenses
- Looks over training and experience and clears applicants to test
- Decides what each license class covers
- Can act against both licensees and unlicensed workers
Connecticut HVAC license: common questions
Which HVAC licenses can you get in Connecticut?
You can choose from five pairs: S-1/S-2 Unlimited Heating, Piping & Cooling; S-9/S-10 Limited Heating & Cooling; S-7/S-8 Limited Heating; S-5/S-6 Limited Heating, Hot Water & Steam; and D-1/D-2 Limited Warm Air, A/C & Refrigeration. In each pair, the first code is the contractor license.
How many training hours does a Connecticut HVAC journeyperson license take?
If you don’t go through a CT Department of Labor apprenticeship, you need 4,000 hours on the job and 432 in the classroom for D-2, 6,000 and 576 for S-10, or 8,000 and 576 for S-6 and S-8.
How do you become a licensed HVAC contractor in Connecticut?
After at least 2 years as a licensed journeyperson, you pass both the contractor trade exam and the Connecticut Business & Law exam.
Is the Connecticut HVAC license exam open book?
Yes. You can bring the approved references to the trade exams, tabbed and highlighted. The passing score is 70%.
Who runs the Connecticut HVAC license exams?
PSI does. You can book online or by calling (855) 746-8171.
Do you need continuing education to renew a Connecticut HVAC license?
No. You can renew a heating and cooling license in Connecticut without any CE.
Does Connecticut accept an out-of-state HVAC license?
It might. Connecticut reviews boards that meet its minimum standards one at a time, and out-of-state contractors with enough documented experience can qualify to take the contractor exam.
Where this information comes from
- Connecticut Department of Consumer Protection, Heating, Cooling and Sheet Metal Work license applications
- Connecticut Department of Consumer Protection, Plumbing and Piping Work Examining Board
- PSI, Connecticut occupational exams
- Connecticut General Statutes § 20-330
- Connecticut DCP, Heating, Cooling and Sheet Metal Work license fees
- PSI, Connecticut Heating, Piping and Cooling Trades candidate information bulletin
Last updated October 27, 2026. Spot something out of date? Tell us.
Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Connecticut Department of Consumer Protection.