Connecticut Gas Fitter License: Requirements, Exam and How to Apply, Connecticut Gas Fitter License, Connecticut, Limited Journeyperson, Limited Contractor, Journeyperson, Contractor, Connecticut Department of Consumer Protection, how to get a Connecticut Gas Fitter License, Connecticut Gas Fitter License requirements, Connecticut Gas Fitter License exam, Connecticut licensing board, Connecticut contractor license, license application steps, exam reference books, Any size, Apprenticeship path, CT Department of Labor apprenticeship, Doesn’t apply

Home Licenses Gas Fitter License Connecticut

Limited Gas & Oil Burner · Journeyperson & Contractor

Connecticut Gas Fitter License: Requirements, Exam and How to Apply

In Connecticut, gas burner work falls under four Limited Gas and Oil Burner classes, B-1 through B-4, and the Department of Consumer Protection issues them. Below you’ll see which class matches your work, how many training hours it takes, how the PSI exams work and how to apply.

Last updated October 27, 2026 from Connecticut Department of Consumer Protection requirements

Exam time

1–2 hrs

1 hr for B-4, 1.5 hrs for B-2, 2 hrs for B-1

Time to get license

Varies

2,000–4,000 hours on the job; contractors also need 2 yrs as a journeyperson

Continuing ed

Not required

You don’t need CE to renew

Do you need a Connecticut gas fitter license?

Yes. In Connecticut, you need a Limited Gas and Oil Burner license to install, service or repair gas or oil burners. The right class comes down to the size of the burner and whether you work on your own or for a licensed contractor.

You need the license when

  • Your work is to install, service or repair gas or oil burners
  • Your jobs involve burners for domestic or light commercial use that burn 5 gallons or less per hour (B-1 or B-2)
  • Your work is on gas or oil fired burners of any size (B-3 or B-4)
  • You own the business and take on the contracts (B-1 or B-3 contractor)

Exceptions

  • B-2 and B-4 journeypersons have to be on the payroll of a contractor licensed for the same work
  • We couldn’t confirm any other exemptions, so ask the Department of Consumer Protection before you count on one

What happens if you work unlicensed

The Department of Consumer Protection licenses gas and oil burner work and can discipline anyone who does it without a license. Before you accept a job, be sure your license class fits the burners involved.

How to get a Connecticut gas fitter license in 6 steps

  1. Choose your class First step
    Pick B-1 or B-2 for burners rated at 5 gallons or less per hour, or B-3 or B-4 for any gas or oil fired burner. You’ll need a journeyperson license before you can go for a contractor class (B-1, B-3).
  2. Finish your training 2,000–4,000 hrs
    Either complete a CT Department of Labor apprenticeship or document your hours: 2,000 on the job plus 288 in the classroom for B-2, or 4,000 on the job plus 360 in the classroom for B-4.
  3. Collect your paperwork Before applying
    If you didn’t go through a state apprenticeship, you’ll need employer letters that are dated, notarized and on company letterhead. They should give your employment dates and describe your training in detail. Contractor applicants also include a copy of their journeyperson license and its first-issue date.
  4. Apply with the Department of Consumer Protection Before testing
    You can start from the heating, cooling and sheet metal licensing page at DCP, or phone 800-842-2649.
  5. Pass the PSI exams Test day
    Book at psiexams.com or by calling (855) 746-8171. You can use books on the exams. Contractor applicants must pass the CT Business & Law exam too.
  6. Get your license From DCP
    After you pass, DCP issues your license: B-1, B-2, B-3 or B-4.

Connecticut gas fitter application checklist

Connecticut’s application on a single page

  • Choose B-1, B-2, B-3 or B-4
  • A CT DOL apprenticeship, or records of your on-the-job and classroom hours
  • Employer letters, notarized and on company letterhead
  • A journeyperson license held for 2+ years (for contractors)
  • A passing score on the PSI trade exam
  • A passing score on the CT Business & Law exam (for contractors)

Connecticut gas fitter license classes

Domestic and light commercial burners (5 gallons or less per hour) fall under the B-1 and B-2. Any gas or oil fired burner falls under the B-3 and B-4. Journeypersons are employed by a licensed contractor.

B-2 Starting level

Limited Journeyperson

For domestic and light commercial gas or oil burners: you install, service and repair them, employed by a licensed contractor.

ExamB-2 exam
Limit5 gal/hr or less

B-1 Contractor

Limited Contractor

Installs, services and repairs gas or oil burners for domestic and light commercial use.

ExamB-1 + Business & Law
Limit5 gal/hr or less

B-4 Any burner

Journeyperson

Installs, services and repairs gas or oil fired burners of any kind while a licensed contractor employs you.

ExamB-4 exam
LimitAny size

B-3 Highest contractor level

Contractor

Installs, services and repairs gas or oil fired burners of any kind.

ExamB-3 + Business & Law
LimitAny size

Requirements for each Connecticut gas fitter class

You can qualify as a journeyperson through a state apprenticeship or by documenting your training hours. To be a contractor, you first need to hold a journeyperson license for 2 years.

RequirementB-2 JourneypersonB-4 JourneypersonB-1 / B-3 Contractor
Apprenticeship pathCT Department of Labor apprenticeshipCT Department of Labor apprenticeshipDoesn’t apply
On-the-job training2,000 hours4,000 hoursA journeyperson license held for 2 years
Hours in the classroom288360Not stated
Employer lettersNotarized and on letterhead (if you didn’t apprentice)Notarized and on letterhead (if you didn’t apprentice)A copy of your journeyperson license and its first-issue date
ExamsB-2 examB-4 examB-1 or B-3 exam and the CT Business & Law exam

The Connecticut gas fitter exam

There’s a separate open-book trade exam for each class, and contractor applicants also take the Connecticut Business & Law exam. The approved references can be tabbed and highlighted, and you can use them while you test.

Format

Open book

Questions

30–50, depending on class

Passing score

70%

Exam vendor

PSI

Scoring and content

  • B-1: 2 hours for 50 questions, 70% passes
  • B-2: 1.5 hours for 40 questions
  • B-4: 1 hour for 30 questions; we couldn’t confirm how many questions the B-3 has
  • Subjects: oil burners, fuel gas systems, controls, equipment, piping and valves, chimneys, flues and vents, and testing and maintenance
  • You’ll use the 2021 IMC and IRC, NFPA 31, NFPA 54 and NFPA 58 as references, and B-1 and B-2 candidates also use the 2021 IFGC

Retakes

  • We couldn’t confirm a waiting period before a retake
  • PSI charges $59 per exam portion, whether it’s your first try or a retake
  • Book or rebook with PSI at (855) 746-8171
  • If you’re applying as a contractor, you have to pass the trade exam and Business & Law

Books and codes for this exam (open book)

The Connecticut B-1, B-2, B-3 and B-4 limited gas and oil burner exams are open book: you can tab, highlight and use the references below during the test. The International Fuel Gas Code applies only to the B-1 and B-2 exams, and contractor applicants also take the open-book Business and Law exam.

ReferenceEditionHow it’s used
International Mechanical Code (IMC)2021Allowed in exam
International Residential Code (IRC)2021Allowed in exam
International Fuel Gas Code (IFGC) — B-1/B-2 exams2021Allowed in exam
NFPA 31: Standard for the Installation of Oil-Burning Equipment2011Allowed in exam
NFPA 54: National Fuel Gas Code2012Allowed in exam
NFPA 58: Liquefied Petroleum Gas Code2014Allowed in exam
NASCLA Contractor’s Guide to Business, Law and Project Management — Business and Law exam6th editionAllowed in exam

Prep for the Connecticut gas fitter exam

Our exam prep course, Total Prep and complete bundle for the Connecticut gas fitter exam. Prices are coming soon.

Books for this exam

Renewing your Connecticut gas fitter license

You don’t need any continuing education to renew a Connecticut Limited Gas and Oil Burner license. Like other heating, piping and cooling licenses, it expires each year on August 31. Renewing costs $150 for a contractor and $120 for a journeyperson.

Renewal cycle

Every year (Aug 31)

CE hours

Not required

Renewal fee

$150 for contractors, $120 for journeypersons

Late penalty

Not stated

Licensed in another state?

Connecticut may offer reciprocity to licensing boards whose standards are at least as strict as the ones its own board sets. Ask the board for details.

Other states: reviewed case by case

This can happen when another board’s standards meet Connecticut’s minimum. Talk to DCP before you apply.

Out-of-state contractors: the experience path

With an out-of-state Heating & Cooling Contractor license, you can qualify for the B-1 or B-3 exam by sending a work history that covers your journeyperson years and 2 more years, along with notarized employer letters.

City and county rules in Connecticut

The state issues your license, and it’s good anywhere in Connecticut. Permits and inspections on each job are still up to local building officials.

The state

  • The B-1 through B-4 licenses
  • Reviewing training and experience
  • Approving you for the PSI exams
  • Renewals and discipline

Cities and counties

  • Permits for gas piping and burner work, where they’re required
  • Inspections
  • Enforcing local codes

Who oversees gas and oil burner technicians in Connecticut

Licensing authority

Connecticut Department of Consumer Protection

800-842-2649

portal.ct.gov/DCP

What the board does

  • Grants the B-1, B-2, B-3 and B-4 Limited Gas and Oil Burner licenses
  • Looks over apprenticeship, training and experience records
  • Clears applicants to take the PSI exams
  • Reviews reciprocity requests from other boards

Connecticut gas fitter license: common questions

Is there a gas fitter license in Connecticut?

In Connecticut, gas burner work is covered by the B-1 through B-4 Limited Gas and Oil Burner licenses, which the Department of Consumer Protection issues.

How do Connecticut’s B-1/B-2 gas burner licenses differ from B-3/B-4?

The B-1 and B-2 are for domestic and light commercial burners that use 5 gallons or less per hour. The B-3 and B-4 are for gas or oil fired burners of any kind.

How many training hours do you need for a Connecticut gas burner license?

A B-2 takes 2,000 hours on the job and 288 in the classroom. A B-4 takes 4,000 hours on the job and 360 in the classroom. Finishing a CT Department of Labor apprenticeship counts too.

Is the Connecticut gas and oil burner exam open book?

Yes, you can use books on every trade exam. On the B-1, you get 2 hours for 50 questions, and the passing score is 70%.

Do Connecticut gas burner contractors take a Business and Law exam?

Yes. After holding a journeyperson license for at least 2 years, B-1 and B-3 contractor applicants must also pass the Connecticut Business & Law exam.

Do you need continuing education for a Connecticut gas burner license?

No. You can renew this Connecticut license without any continuing education.

Can you transfer an out-of-state gas burner license to Connecticut?

It might be. If another board meets Connecticut’s minimum standards, reciprocity is an option. DCP can tell you more.

Where this information comes from

  1. Connecticut Department of Consumer Protection, Heating, Cooling and Sheet Metal Work licenses
  2. PSI, Connecticut occupational trades exams
  3. Connecticut Department of Labor, apprenticeship program
  4. Connecticut DCP, Heating, Cooling and Sheet Metal Work license fees
  5. PSI, Connecticut Heating, Piping and Cooling Trades candidate information bulletin

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Connecticut Department of Consumer Protection.