
Home Licenses General Contractor License New Mexico
General Contractor · GB-98 General Building
New Mexico General Contractor License: Requirements, Exam and How to Apply
This guide covers what it takes to earn New Mexico’s GB-98 General Building license: the experience, all three exams, the NASCLA alternative and the application process with the Construction Industries Division.
Last updated October 27, 2026 from New Mexico Regulation and Licensing Department requirements
Exam time
~11 hrs
GB-2, GB-98 and Business & Law
Time to get license
~4 yrs
Experience of 4 years or 8,000 hours
Continuing ed
Not required
This license has no CE requirement
Do you need a New Mexico general contractor license?
It is if you plan to work as a general contractor building, altering, repairing or tearing down homes and commercial buildings in New Mexico. The state’s general building classification is the GB-98, issued by the Regulation and Licensing Department’s Construction Industries Division.
You need the license when
- Building, altering, repairing or tearing down commercial buildings or certain other structures is part of your work
- You do that same work on residential buildings (all GB-2 work is part of the GB-98)
- Under a GB-98, you take on work in the GS specialty, GF-5 or GF-7 classifications
- Under a GB-98, you seal coat or stripe parking lots and driveways
Exceptions
- If your work fits a narrower classification, like GB-2 residential, you need that license rather than a GB-98
- Before bidding on work you believe is exempt, check with the Construction Industries Division
What happens if you work unlicensed
We couldn’t confirm the penalty amounts. As a rule, the Construction Industries Division can investigate anyone contracting without the proper license and take action, so get licensed before you bid or begin any job.
How to get a New Mexico general contractor license in 6 steps
- Build your experience Before you apply
Before you can qualify for a GB-98, you need 4 years (8,000 hours) of experience. - Prepare your references Before exam day
You can use books on all three exams. Tab and highlight the approved references, and print New Mexico Administrative Code Title 14, Chapter 7 (building codes) in particular. - Schedule with PSI Before exam day
Schedule your exams through PSI online or at 855-807-3994. You’ll find testing centers in the larger cities across the state. - Pass the three exams Exam day
You need at least 75% on Business & Law, GB-2 Part 1, and GB-98 Part 2 (or the NASCLA Commercial General Building exam). Your pass information comes by email. - Get approved as a Qualifying Party Before you apply
Whoever qualifies the license has to be an approved Qualifying Party. - Apply with the CID After you pass
File the signed, complete application online with the New Mexico Regulation and Licensing Department, or mail it, your documents and the license fee to the address printed on the application.
New Mexico general contractor application checklist
Everything for the New Mexico application on one page
- Documented experience of 4 years or 8,000 hours
- A passing Business & Law exam score
- A passing GB-2 Part 1 score
- A passing GB-98 Part 2 or NASCLA exam score
- Approved Qualifying Party
- A signed, complete application and the license fee
New Mexico general contractor license classes
No New Mexico building license is broader than the GB-98. It includes all GB-2 residential work and adds commercial work on top.
GB-98 Most complete
General Building
Lets you erect, alter, repair or demolish homes, commercial buildings and certain structures. GB-2, GS, GF-5 and GF-7 work is included, along with seal coating and striping driveways and parking lots.
| Exam | B&L + GB-2 + GB-98 or NASCLA |
| Limit | Not stated |
GB-2 Residential
Residential Building
This is the residential building class. Passing its exam counts as Part 1 on the way to a GB-98, and anyone holding a GB-98 can also do GB-2 work.
| Exam | GB-2 exam |
| Limit | Not stated |
Requirements for each New Mexico general contractor class
The only choice is the exam: New Mexico’s own GB-98, or the NASCLA Commercial General Building exam in its place. The rest of the requirements match.
| Requirement | State GB-98 exam route | NASCLA exam route |
|---|---|---|
| Experience | 4 years / 8,000 hours | 4 years / 8,000 hours |
| Business & Law exam | Required | Required |
| GB-2 Part 1 exam | Required | Required |
| Commercial trade exam | GB-98 Part 2 | NASCLA Commercial General Building |
| Passing score | 75% | 81 of 115 correct |
| Qualifying Party | Must be approved | Must be approved |
| Minimum age | Not stated | Not stated |
The New Mexico general contractor exam
To get the GB-98 you pass three exams: Business & Law, GB-2 Residential Building (Part 1) and GB-98 General Building (Part 2). The NASCLA Commercial General Building exam can replace GB-98 Part 2. Every New Mexico exam is open book.
Format
Open book
Questions
80 + 100 + 50
Passing score
75%
Exam vendor
PSI
Scoring & content
- GB-2 Part 1: 80 questions in 225 minutes, 75% to pass
- GB-98 Part 2: 100 questions in 310 minutes
- Business & Law: 50 questions in 130 minutes
- NASCLA option: 115 questions in 330 minutes; you need 81 correct
- You may tab and highlight references; bring NMAC Title 14
Retake policy
- Retake rules and waiting periods: we couldn’t confirm them
- Retakes cost $134.53 for each GB-98 part and $68.88 for Business & Law
- Call PSI at 855-807-3994 to schedule or reschedule
Books and codes for this exam (open book)
New Mexico’s GB-2, GB-98 and Business and Law exams are open book: the references below can be tabbed, highlighted and used during the test. The GB-2 exam uses the GB-98 list plus five additional books, and it’s worth bringing all of NMAC Title 14, since most code questions come from Chapter 7.
Applicants may take the NASCLA Commercial General Building Contractor exam in place of the state GB-98 exam; the Business and Law exam is still required.
Prep for the New Mexico general contractor exam
Our exam prep course, Total Prep and complete bundle for the New Mexico general contractor exam. Prices are coming soon.
Books for this exam
-

2021 International Building Code
Price coming soon -

2021 International Energy Conservation Code
Price coming soon -

2021 International Residential Code
Price coming soon -

2021 New Mexico Commercial Building Code (14.7.2 NMAC)
Price coming soon -

Building Code Requirements and Specification for Masonry Structures (TMS 402/602-13; ACI 530/530.1-13), 2013
Price coming soon -

Building Code Requirements for Structural Concrete (ACI 318-19) and Commentary (ACI 318R-19), 2019
Price coming soon -

Building Component Safety Information (BCSI) Guide, 2025 Edition
Price coming soon -

Contractor’s Guide to Quality Concrete Construction (MNL-5), 4th Edition
Price coming soon -

Design and Control of Concrete Mixtures, 17th edition
Price coming soon -

Erector’s Manual: Standards and Guidelines for the Erection of Precast Concrete Products
Price coming soon -

Gypsum Construction Handbook, 7th Edition
Price coming soon -

Instruction Manual for Training and Certification of Field Personnel for Unbonded Post-Tensioning (C30.1-03, Level 1 Unbonded PT Field Installation)
Price coming soon -

Manual of Construction with Steel Deck (MOC3)
Price coming soon -

Modern Masonry: Brick, Block, Stone, Concrete
Price coming soon -

NASCLA Contractors Guide to Business, Law and Project Management, Basic 14th Edition, Basic Edition
Price coming soon -

Pipe & Excavation Contracting Revised, Revised edition
Price coming soon -

Placing Reinforcing Bars
Price coming soon -

Principles and Practices of Commercial Construction, 11th edition
Price coming soon -

Roofing Construction & Estimating Revised, Revised edition
Price coming soon -

Technical Digest 9: Handling and Erection of Steel Joists and Joist Girders
Price coming soon -

Title 14 NMAC, Housing and Construction (Chapter 7, Building Codes General)
Price coming soon -

Book Tabs
Price coming soon
Renewing your New Mexico general contractor license
The GB-98 has no continuing education requirement in New Mexico. Contractor licenses last three years, and renewing costs the same $300 GB-98 classification fee as getting licensed. If you’re late, you pay $1 a day for the first 30 days, then the equivalent of a full year’s fee from 30 to 90 days. Past 90 days, the license is cancelled.
Renewal cycle
3 years
CE hours
Not required
Renewal fee
$300
Late penalty
$1/day (1–30 days)
Licensed in another state?
Reciprocity in New Mexico applies to journeyman licenses, not to the GB-98. Your best shortcut is the NASCLA exam, which the state accepts instead of its own GB-98 Part 2.
No contractor reciprocity on record
You’ll apply as a new applicant. Already passed the NASCLA Commercial General Building exam? Ask the CID if it can count toward the GB-98. Business & Law is still required.
City and county rules in New Mexico
The Construction Industries Division issues your state license. Permits and inspections are still handled by each city and county.
State handles
- The GB-98 and other contractor licenses
- Qualifying Party approval
- Exams, through PSI
- Building code rules in NMAC Title 14
What cities & counties handle
- Building permits
- Local inspections
- Local registration rules, so check them before you pull a permit
Who oversees New Mexico general contractors
Licensing authority
New Mexico Regulation and Licensing Department, Construction Industries Division
505-476-4500
What the board does
- Issues the GB-98 and other contractor licenses
- Approves Qualifying Parties
- Sets the exam requirements, which PSI administers
- Takes applications online and by mail
New Mexico general contractor license: common questions
How much experience does the New Mexico GB-98 license require?
You need 4 years (8,000 hours) of experience. You also have to be an approved Qualifying Party or have one.
How many exams does the New Mexico GB-98 license require?
You sit for three: Business & Law, then GB-2 Residential Building (Part 1) and GB-98 General Building (Part 2). In place of GB-98 Part 2, you’re allowed to take the NASCLA Commercial General Building exam.
Is the New Mexico general contractor exam open book?
Yes. The approved references are allowed in the exam, and you can tab and highlight them. Bring NMAC Title 14, and Chapter 7 in particular.
What score passes the New Mexico general contractor exam?
The state exams take at least 75%. On the NASCLA exam, you need 81 of 115 questions correct.
Who gives the New Mexico general contractor exams?
PSI does. Book online or call 855-807-3994; testing centers are in the larger cities across the state.
Do New Mexico general contractors need continuing education?
No. The GB-98 license has no continuing education requirement in New Mexico.
Will New Mexico accept my out-of-state general contractor license?
Not directly. New Mexico’s reciprocity agreements only cover journeyman licenses, so the GB-98 isn’t included. Plan on applying as a new applicant and passing Business & Law.
Where this information comes from
- New Mexico Regulation and Licensing Department, Construction Industries Division
- PSI, New Mexico Construction Industries exams
- New Mexico Administrative Code, Title 14 Housing and Construction
- NMAC 14.7.2, New Mexico Commercial Building Code
- PSI, New Mexico licensing fees (PDF)
- PSI, New Mexico contractor examinations candidate information bulletin (PDF)
- PSI, NM CID contractor license application (PDF)
- PSI, NM CID Qualifying Party certificate application (PDF)
- New Mexico Regulation and Licensing Department, Apply for a Construction Industries license
Last updated October 27, 2026. Spot something out of date? Tell us.
Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the New Mexico Regulation and Licensing Department.