
Home Licenses Gas Fitter License New Mexico
MM-2 Natural Gas Fitting · Contractor Classification
New Mexico Gas Fitter License: Requirements, Exam and How to Apply
Learn what the MM-2 classification lets you do, which experience and exams it takes, and how you apply through New Mexico’s Regulation and Licensing Department.
Last updated October 27, 2026 from New Mexico Regulation and Licensing Department, Construction Industries requirements
Exam time
~6.4 hrs
MM-2 runs 255 min; Business & Law runs 130 min
Time to get license
~4 yrs
Experience totaling 8,000 hours
Continuing ed
16 hrs
This license requires it
Do you need a New Mexico gas fitter license?
It is. Contracting for natural gas piping or gas heating work in New Mexico takes the MM-2 Natural Gas Fitting classification, which is held through an approved Qualifying Party. You must pass the state Business and Law exam too.
You need the license when
- Your work involves installing, altering, repairing or servicing natural gas piping and fittings
- Steam and hot water boilers are part of your work, as are hot water systems rated above 30 psi or 400,000 Btu/hour input
- You install chimney connections, flues, burners or warm air heating systems
- You set warm air appliances or other listed gas appliances
Exceptions
- The MM-2 classification doesn’t include LP gas systems
- We couldn’t confirm any exemptions, so check with the Construction Industries Division before you take on unlicensed gas work
What happens if you work unlicensed
We couldn’t confirm the penalty amounts. The Regulation and Licensing Department oversees construction trade licensing across the state and can act against anyone contracting without a license. Ask the department about the current rules.
How to get a New Mexico gas fitter license in 6 steps
- Build your experience ~4 years
Put in 4 years (8,000 hours) of experience in the trade. - Book both exams through PSI Before you apply
Schedule the MM-2 and Business and Law exams online at PSI’s exam site, or call 855-807-3994. Testing centers are in the larger cities. - Pass the MM-2 trade exam Exam day
It’s open book: 100 questions, 255 minutes, and you need 75% to pass. - Pass the Business and Law exam Exam day
You get 130 minutes for 50 questions. Once you pass, an email arrives with your pass information attached. - Get approved as a Qualifying Party Before licensing
The MM-2 is held through an approved Qualifying Party, so you can’t get licensed without that approval. - Mail your application
Send the completed application with the required documents and license fee to the address listed on the form, or apply online on the Construction Industries website.
New Mexico gas fitter application checklist
Everything for the New Mexico application on one page
- Documented experience of 4 years (8,000 hours)
- A passing MM-2 exam score
- A passing Business and Law exam score
- Approved Qualifying Party
- Completed application, documents and the license fee
The New Mexico gas fitter license
The MM-2 is a mechanical classification limited to natural gas work. LP gas systems fall outside it.
MM-2 Natural gas
Natural Gas Fitting
Lets you work on natural gas piping and fittings, boilers, warm air heating and listed gas appliances, along with related controls, control wiring, pneumatic controls, trenching and backfill. It stops short of LP gas systems.
| Exam | MM-2 + Business & Law |
| Limit | Not stated |
New Mexico gas fitter license requirements
You reach the MM-2 one way: build experience, pass two exams and get approved as a Qualifying Party.
| Requirement | MM-2 Natural Gas Fitting |
|---|---|
| Experience | 4 years (8,000 hours) |
| Trade exam | MM-2: 100 questions, pass with 75% |
| Business & Law exam | Required, 50 questions |
| Qualifying Party | Must be approved |
| Continuing education | 16 hours |
| Minimum age | Not stated |
The New Mexico gas fitter exam
There are two exams: the MM-2 Natural Gas Fitting trade exam and the Business and Law exam. You can use books on both, and you’re allowed to tab and highlight your references.
Format
Open book
Questions
100 + 50
Passing score
75% (MM-2)
Exam vendor
PSI
Scoring & content
- MM-2: 100 questions in 255 minutes, 75% to pass
- On the MM-2 you’ll see piping, gas sizing, safety and testing, combustion air, appliances, heating systems, and chimneys, flues and vents
- Business and Law gives you 130 minutes for 50 questions, on topics from licensing and estimating to finance, taxes, labor law, liens, contracts and safety
- Bring these MM-2 references: the IPT Pipe Trades Handbook, Modern Refrigeration and Air Conditioning, the 2021 Uniform Plumbing Code, the 2021 Uniform Mechanical Code and New Mexico’s Plumbing and Mechanical Codes (Title 14)
- Your one reference for the Business and Law exam is the Basic Edition of the NASCLA Contractors Guide to Business, Law and Project Management
Retake policy
- We couldn’t confirm the retake rules; ask PSI
- The passing score for Business and Law isn’t published in the sources we checked
- Call PSI at 855-807-3994 to schedule or reschedule
- Each retake is $68.88 per exam, the same as your first try
Books and codes for this exam (open book)
The MM-2 Natural Gas Fitting and Business and Law exams are open book: the references below can be tabbed, highlighted and used during the test. Print the New Mexico code chapters to bring with you.
| Reference | Edition | How it’s used |
|---|---|---|
| Uniform Mechanical Code (UMC) — MM-2 exam | 2021 | Allowed in exam |
| Modern Refrigeration and Air Conditioning — MM-2 exam | 22nd edition | Allowed in exam |
| IPT Pipe Trades Handbook — MM-2 exam | Not stated | Allowed in exam |
| Uniform Plumbing Code (UPC) — MM-2 exam | 2021 | Allowed in exam |
| New Mexico Plumbing Code (NMAC Title 14, Chapter 8) — MM-2 exam | 2015 | Allowed in exam |
| New Mexico Mechanical Code (NMAC Title 14, Chapter 9) — MM-2 exam | Not stated | Allowed in exam |
| NASCLA Contractor’s Guide to Business, Law and Project Management, Basic Edition — Business and Law exam | Basic Edition | Allowed in exam |
Prep for the New Mexico gas fitter exam
Our exam prep course, Total Prep and complete bundle for the New Mexico gas fitter exam. Prices are coming soon.
Books for this exam
-

14.9 NMAC, Mechanical Codes (Title 14, Chapter 9)
Price coming soon -

2015 New Mexico Plumbing Code (14.8.2 NMAC)
Price coming soon -

2021 Uniform Mechanical Code
Price coming soon -

2021 Uniform Plumbing Code
Price coming soon -

IPT’s Pipe Trades Handbook
Price coming soon -

Modern Refrigeration and Air Conditioning, 22nd edition
Price coming soon -

NASCLA Contractors Guide to Business, Law and Project Management, Basic 14th Edition, Basic Edition
Price coming soon -

Book Tabs
Price coming soon
Renewing your New Mexico gas fitter license
This license needs 16 hours of continuing education. Contractor licenses last three years, and renewing costs the same $150 classification fee as getting licensed. If you’re late, you pay $1 a day for the first 30 days, then the equivalent of a full year’s fee from 30 to 90 days. Past 90 days, the license is cancelled.
Renewal cycle
3 years
CE hours
16
Renewal fee
$150
Late penalty
$1/day (1–30 days)
Licensed in another state?
In New Mexico, reciprocity is limited to journeyman licenses. We couldn’t confirm an agreement that reaches the MM-2 contractor classification.
Journeyman licenses only: Alaska, Arkansas, Colorado, Idaho, Montana, Nebraska, Oklahoma, South Dakota, Texas, Utah and Wyoming
The agreements cover journeyman licenses. Ask the Regulation and Licensing Department if any of it applies to the MM-2.
MM-2 classification: no agreement listed
Expect to apply as a new applicant and sit for both the MM-2 and Business and Law exams.
City and county rules in New Mexico
The MM-2 classification applies statewide. Permits and inspections are still up to local building departments.
State handles
- MM-2 and the other contractor classifications
- Qualifying Party approval
- Exams, through PSI
- Continuing education requirements
What cities & counties handle
- Gas and mechanical permits
- Inspecting gas piping and appliances
- Local business registration, if required
Who oversees New Mexico gas fitters
Licensing authority
New Mexico Regulation and Licensing Department, Construction Industries
505-476-4500
What the board does
- Issues the MM-2 and other contractor classifications
- Approves Qualifying Parties
- Sets the continuing education rules
- Manages renewals and enforcement
New Mexico gas fitter license: common questions
What work does the New Mexico MM-2 gas fitting license cover?
It covers natural gas piping and fittings, controls, boilers, warm air heating systems and listed gas appliances. LP gas systems aren’t included.
How much experience do you need for a New Mexico MM-2 license?
You need 4 years (8,000 hours).
How many exams does a New Mexico gas fitter license require?
There are two. The MM-2 Natural Gas Fitting exam has 100 questions and needs 75% to pass, and the Business and Law exam has 50 questions.
Are the New Mexico gas fitter license exams open book?
Yes. You can use the approved references during the test, and you may tab and highlight them.
Who gives the New Mexico gas fitter license exams?
PSI does. Book online or call 855-807-3994.
Do New Mexico gas fitters need continuing education?
Yes. This license requires 16 hours of continuing education in New Mexico.
Will New Mexico accept my out-of-state gas fitter license?
New Mexico has journeyman license agreements with 11 states. We couldn’t confirm any for the MM-2, so plan on applying as a new applicant.
Where this information comes from
- New Mexico Regulation and Licensing Department, Construction Industries
- PSI, New Mexico exam catalog
- New Mexico Plumbing Code, Title 14
- New Mexico Mechanical Code, Title 14
- PSI, New Mexico licensing fees (PDF)
- PSI, New Mexico contractor examinations candidate information bulletin (PDF)
- PSI, NM CID contractor license application (PDF)
- PSI, NM CID Qualifying Party certificate application (PDF)
- New Mexico Regulation and Licensing Department, Apply for a Construction Industries license
Last updated October 27, 2026. Spot something out of date? Tell us.
Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the New Mexico Regulation and Licensing Department.