
Home Licenses Electrician License Georgia
Electrician License · Class I & Class II Contractor
Georgia Electrician License: Requirements, Exam and How to Apply
There are two classes of electrical contractor license in Georgia. Here you’ll find the Georgia State Board of Electrical Contractors’ rules on experience, references, the exam and renewal.
Last updated October 27, 2026 from Georgia State Board of Electrical Contractors requirements
Exam time
4 hrs
For the Class I exam, which is open book
Time to get license
8,000 hrs
Of work experience you can prove
Continuing ed
4 hrs
Due before every renewal
Do you need a Georgia electrician license?
Yes, if you’re contracting for electrical work. In Georgia, every electrical contractor needs a license before bidding on or doing any work.
You need the license when
- Bidding on electrical contracting jobs
- Offering electrical contracting services
- Doing electrical work under a contract, whether express or implied
Exceptions
- The state licenses electrical contractors; we couldn’t confirm a separate state journeyman license
- We couldn’t confirm any other exemptions, so ask the Board before you take a job
What happens if you work unlicensed
The sources we checked don’t give penalty amounts. Since the Board can deny, suspend or revoke a license and act against unlicensed contractors, hold off on bidding until you have your license.
How to get a Georgia electrician license in 6 steps
- Get your experience Before you apply
Keep records of 8,000 hours of electrical work experience you can prove. - Get 3 reference letters Before you apply
Your references need to know your work, and one of them has to be a licensed Electrical Contractor. Each letter goes in a sealed envelope, signed by the reference across the seal. - Apply to take the exam Pre-approval
Send your exam application, with your fingerprints and criminal background check, through the State Board of Electrical Contractors. - Wait for PSI to give you a date About 2 weeks out
When your packet is complete, PSI reaches out with your exam date and time, usually two weeks ahead. - Pass the exam Exam day
You get 4 hours for the 155-question Class I exam. Since it’s open book, tab and highlight your approved references. - Get your license through the PLB Once you pass
Finish your license application with the Georgia Professional Licensing Boards. If you have questions, call 404-424-9966.
Georgia electrician application checklist
Everything for your Georgia application on one page
- Proof of 8,000 hours of electrical work experience
- 3 sealed reference letters, with 1 from a licensed Electrical Contractor
- Fingerprints and a criminal background check
- Pre-approval from the Board to test
- Your approved references, tabbed and highlighted
- A passing score on the PSI exam
Georgia electrician license classes
There are two classes of electrical contractor in Georgia. Either one lets you bid on and contract for electrical work, but only Class II puts no limit on unit size.
Class I Entry contractor
Electrical Contractor Class I
Lets you bid on, offer or do electrical contracting work under a contract.
| Exam | Class I exam |
| Limit | Not stated |
Class II Unrestricted
Electrical Contractor Class II
The same contracting rights Class I has, but on units of any size.
| Exam | Class II exam |
| Limit | Units of any size |
Requirements for each Georgia electrician class
Both classes share the same main requirements. You have to be pre-approved before you can take either exam.
| Requirement | Class I | Class II |
|---|---|---|
| Experience | 8,000 hours of work you can prove | 8,000 hours of work you can prove |
| References | 3 letters, with 1 from a licensed Electrical Contractor | 3 letters, with 1 from a licensed Electrical Contractor |
| Background check | Fingerprints and a criminal check | Fingerprints and a criminal check |
| Exam | Class I: 155 questions in 4 hours | Class II exam (we couldn’t confirm the details) |
| Pre-approval to test | Required | Required |
| Continuing education | 4 hours every renewal | 4 hours every renewal |
The Georgia electrician exam
You can bring approved references into Georgia’s electrical contractor exams, tabbed and highlighted, and use them as you test.
Format
Open book
Questions
155 (Class I)
Passing score
Not stated
Exam vendor
PSI
Scoring and content
- Class I: 155 questions in 4 hours
- What’s covered: technical functions, plus laws, regulations and administrative functions
- Technical references: Printreading Based on the NEC, Ugly’s Electrical References, American Electricians’ Handbook, and the NEC (NFPA 70)
- Business references: IRS Circular E, OSHA 1926, and the Georgia NASCLA Contractors Guide to Business, Law and Project Management
Retaking the exam
- We couldn’t confirm the retake rules
- You have to be pre-approved before you book any exam
- PSI books your exam once it has your full application packet
- Ask the Board before you book again
Books and codes for this exam (open book)
Georgia’s Class I and Class II electrical contractor exams are open book: the approved references can be tabbed, highlighted and used during the test. The same list covers both classes.
| Reference | Edition | How it’s used |
|---|---|---|
| NFPA 70: National Electrical Code (NEC) | 2023 or 2020 | Allowed in exam |
| American Electricians’ Handbook | 17th edition | Allowed in exam |
| NASCLA Contractor’s Guide to Business, Law and Project Management (Georgia edition) | 5th edition | Allowed in exam |
| OSHA 29 CFR 1926: Safety and Health Regulations for Construction | Not stated | Allowed in exam |
| Ugly’s Electrical References | 2023 | Allowed in exam |
| Printreading Based on the NEC | 2020 NEC edition | Allowed in exam |
| IRS Publication 15 (Circular E): Employer’s Tax Guide | Not stated | Allowed in exam |
The sources we checked lists both the 2023 and 2020 NEC, so confirm which edition your exam uses in the candidate bulletin.
Prep for the Georgia electrician exam
Buy the course on its own, or a package that comes with more.
Most complete
Complete Bundle
Every book the exam lists, plus all of our prep, in one order.
Everything in Total Prep, plus
- All 7 reference books the exam lists, in the editions the exam bulletin names
Course + exam-room kit
Total Prep
Everything for the exam except the books themselves.
Everything in the course, plus
- Highlighting guide: what to mark in each book you can bring into the exam room
- Book tabs for each of those books
Online course
Exam Prep Course
Self-paced online prep for the Georgia electrician exam.
What you get
- Lessons that follow the exam’s content outline
- Quizzes after each lesson
- Practice questions in the exam’s format
- Study at your own pace, online
Books for this exam
This exam is open book and lists 7 references.
NEC
2023
NFPA 70: National Electrical Code (NEC)
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Edition the exam uses: 2023 or 2020.
- What it covers: Across the United States, this is the model code for installing electrical systems safely, with rules on wiring methods, grounding, overcurrent protection, conductor sizing and equipment. Many jurisdictions have adopted the 2023 edition. Electricians and inspectors work with it every day, and it is the core reference for electrical licensing exams.
American Electricians’ Handbook
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Edition the exam uses: 17th edition.
- What it covers: This long-running handbook for electricians covers wiring methods, motors, transformers, lighting, grounding, raceways and the National Electrical Code. It pairs code guidance with practical installation data. Electricians and apprentices rely on it on the job, for study and as a reference in the exam room.
NASCLA Contractor’s Guide to Business, Law and Project Management (Georgia edition)
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Edition the exam uses: 5th edition.
- What it covers: A business and law text for Georgia’s electrical, plumbing, conditioned air, low voltage and utility contractor exams. Topics include business planning, estimating, contracts, scheduling, safety, and managing employees and subcontractors. NASCLA sells it with permanent tabs so you can use it in the exam room.
OSHA
OSHA 29 CFR 1926: Safety and Health Regulations for Construction
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- What it covers: These federal rules govern safety on construction jobs, including fall protection, scaffolds, excavations, electrical safety, cranes, personal protective equipment and hazard communication. Contractors and tradespeople study them for the safety questions on licensing exams. Some exams let you bring them into the room.
2023
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Edition the exam uses: 2023.
- What it covers: Electricians carry this pocket-sized field reference, which is aligned to the 2023 National Electrical Code. It gathers code-based tables, formulas, conduit and ampacity data, wiring diagrams and conversion charts. Electrical apprentices and journeymen keep it with them at work and rely on it while studying for licensing exams.
2020
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Edition the exam uses: 2020 NEC edition.
- What it covers: This textbook teaches you to read electrical drawings and plans alongside the National Electrical Code. It works through plans for a house, a veterinary center and a hospital energy facility, with code references and tests. Electrician candidates use it to practice reading plans and tying them to NEC rules.
IRS
IRS Publication 15 (Circular E): Employer’s Tax Guide
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- What it covers: This IRS tax guide for employers comes out in a new version every year. It explains employer identification numbers, who qualifies as an employee, income tax withholding, Social Security and Medicare taxes, deposit rules and filing employment tax forms. Contractors and electricians rely on it for payroll and tax questions.
How it’s used on this exam
- On exam day: Tabs go on the books you bring into the exam room.
Your book list
Every book on this list
Or get them in the Complete Bundle
Renewing your Georgia electrician license
Before every renewal, you need 4 hours of continuing education. Licenses renew every two years, due June 30 of even-numbered years, and renewing costs $100.
Renewal cycle
2 years (due June 30 of even years)
CE hours
4
Renewal fee
$100
Late penalty
Not stated
Georgia electrician CE
Hours, deadlines, required topics and the renewal steps, in one guide.
Licensed in another state?
Georgia has electrical reciprocity with five states. Before you apply, ask the Board what each agreement covers.
Alabama: reciprocity agreement
Alabama has a reciprocity agreement with Georgia. Check the terms with the Board.
Louisiana: reciprocity agreement
Louisiana has a reciprocity agreement with Georgia. Check the terms with the Board.
North Carolina: reciprocity agreement
North Carolina has a reciprocity agreement with Georgia. Check the terms with the Board.
South Carolina: reciprocity agreement
South Carolina has a reciprocity agreement with Georgia. Check the terms with the Board.
Tennessee: reciprocity agreement
Tennessee has a reciprocity agreement with Georgia. Check the terms with the Board.
Every other state: no agreement
You apply as a new applicant and take Georgia’s exam.
City and county rules in Georgia
A state license lets you work anywhere in Georgia, but each job’s permits and inspections are still up to cities and counties.
What the state handles
- Class I and Class II electrical contractor licenses
- Pre-approval to test, with exams given by PSI
- Fingerprints and background checks
- Continuing education for renewals
What cities and counties handle
- An electrical permit for every job
- Inspecting finished work
- Local business licenses
Who oversees electricians in Georgia
Licensing authority
Georgia State Board of Electrical Contractors
404-424-9966
What the board does
- Issues the Class I and Class II electrical contractor licenses
- Approves who can sit for the exam
- Decides what continuing education renewal requires
- Handles reciprocity with Alabama, Louisiana, North Carolina, South Carolina and Tennessee
Georgia electrician license: common questions
How many experience hours do you need for a Georgia electrical license?
To qualify for the electrical contractor exam, you need 8,000 hours of work experience you can prove.
How is a Georgia Class I electrical license different from Class II?
Either one lets you bid on and contract for electrical work. The difference is that Class II contractors can work on units of any size.
Can you use books on the Georgia electrical contractor exam?
Yes. Bring the approved references, such as the NEC and the Georgia NASCLA business and law guide. You can tab and highlight them and use them as you test.
How many questions are on Georgia’s Class I electrical exam?
There are 155 questions and a 4-hour limit. They cover laws and regulations as well as technical functions.
Who can write your reference letters for a Georgia electrical license?
They need to be people familiar with your work. Get 3 letters in all, including one from a licensed Electrical Contractor. Every letter is sealed in an envelope, and the writer signs across the seal.
Does Georgia offer reciprocity for electrical licenses?
Yes. There are agreements in place with five states: Alabama, Louisiana, North Carolina, South Carolina and Tennessee. The Board can confirm what each one covers.
How much continuing education do Georgia electrical contractors need?
You need 4 hours before every renewal.
Where this information comes from
- Georgia State Board of Electrical Contractors
- Georgia Professional Licensing Boards
- PSI, Georgia Electrical Contractor exam information
- IRS Publication 15 (Circular E), Employer’s Tax Guide
- Georgia Secretary of State, GOALS fee schedules by board
- Georgia Secretary of State, How-To Guide: Electrical Contractors
Last updated October 27, 2026. Spot something out of date? Tell us.
Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Georgia State Board of Electrical Contractors.