
Home Licenses HVAC Contractor License Georgia
HVAC Contractor · Class I & Class II
Georgia HVAC Contractor License: Requirements, Exam and How to Apply
In Georgia, an HVAC license goes by the name Conditioned Air Contractor license. Here you’ll find both classes, the experience each one takes, how the open-book exam works and what keeps your license active.
Last updated October 27, 2026 from Georgia State Board of Conditioned Air Contractors requirements
Exam time
7 hrs
Open book, 120 questions
Time to get license
~4–5 yrs
Class I takes 8,000 hours and Class II takes 10,000 hours
Continuing ed
Required
Due before every renewal; we couldn’t confirm the hours
Do you need a Georgia HVAC contractor license?
Yes. Georgia won’t let you bid, offer or do HVAC work until you hold a Conditioned Air Contractor license. The class you need comes down to how big the systems you work on are.
You need the license when
- You bid on conditioned air contracting or offer to do it
- You do conditioned air work under a contract, whether express or implied
- Class I: every system you handle stays within 175,000 BTU heating and 60,000 BTU cooling
- Your systems are larger, with no size cap (Class II)
Exceptions
- We couldn’t confirm any exemptions, so check with the Board before you take on work without a license
- Going past the Class I limits doesn’t exempt you; that work calls for a Class II license
What happens if you work unlicensed
The Board can take action against anyone doing conditioned air work without a license. It has the power to deny, discipline or decline to renew licenses, so get your license before you bid on or start an HVAC job.
How to get a Georgia HVAC contractor license in 6 steps
- Choose a class Before you start
Go with Class I if your jobs stay at or under 175,000 BTU heating and 60,000 BTU cooling. Go with Class II if you want no limit. - Get your experience 8,000–10,000 hours
You need 8,000 hours for Class I or 10,000 hours for Class II. Collect references from people who worked with you directly. - Complete the design course Before you apply
Each class has its own course. Class I applicants need ACT107 or a Board-approved course on heat loss/gain and duct design. Class II applicants need a Board-approved course covering Manuals N & Q or Carrier Design 1, 2, 3. - Get pre-approved online Before the exam
Set up an account in the Georgia Online Application Services portal, which you reach from the Board’s website. If you’re applying for Class I, you’ll also go through a background check and fingerprinting. - Take and pass the exam Exam day
After the Board approves you, PSI sends instructions, and you book the exam online or by calling 855-898-0711. You get 7 hours for 120 questions, and it’s open book. - Get your license After the exam
Wrap up the remaining licensing steps with the Board, and stay current on continuing education ahead of every renewal.
Georgia HVAC contractor application checklist
Georgia’s application on a single page
- Experience: 8,000 hours (Class I) or 10,000 hours (Class II)
- Finished a Board-approved design course
- 3 reference letters from qualified professionals
- EPA certification, Type II or higher
- Fingerprinting and background check
- Board pre-approval, followed by a passing exam score
Georgia HVAC contractor license classes
There are two classes of conditioned air contractor in Georgia. They differ in how large the equipment can be, and Class II calls for more experience.
Class I Restricted
Restricted Conditioned Air Contractor
Limited to equipment no bigger than 175,000 BTU of heating and 60,000 BTU of cooling.
| Exam | Conditioned Air, 120 questions |
| Limit | 175,000 BTU heat / 60,000 BTU cool |
Class II Unrestricted
Unrestricted Conditioned Air Contractor
Covers every kind of conditioned air contracting, whatever the system size.
| Exam | Conditioned Air, 120 questions |
| Limit | Unrestricted |
Requirements for each Georgia HVAC contractor class
You need Board pre-approval and a passing exam score for either class. Class II adds more experience and calls for a different design course.
| Requirement | Class I (Restricted) | Class II (Unrestricted) |
|---|---|---|
| Experience | 8,000 hours | 10,000 hours |
| Exam | Conditioned Air exam, after pre-approval | Conditioned Air exam, after pre-approval |
| Design course | ACT107 at a Georgia technical school, or a duct design and heat loss/gain course the Board has approved | A Board-approved course in Manuals N & Q or Carrier Design 1, 2, 3 |
| References | 3 letters from a licensed conditioned air contractor, an architect, an engineer, or a city or county inspector | Not stated |
| EPA certification | Type II or higher | Not stated |
| Background check | Fingerprinting and a criminal background check | Not stated |
The Georgia HVAC contractor exam
Applicants for both classes sit for the Georgia Conditioned Air Contractor exam. Because it’s open book, you can tab and highlight your approved references and bring them into the test.
Format
Open book
Questions
120
Passing score
Not stated
Exam vendor
PSI
Format & topics
- 7-hour limit for 120 questions
- Covers laws, regulations and administrative functions; system design; installation; and system maintenance and repair
- You can tab and highlight your references
- Exams have used the 2024 IFGC and IMC since May 1, 2026
- The Georgia DCA offers the state’s IFGC and IMC amendments for free
Retakes
- Waiting period: Not stated
- Retake fee: Not stated
- You must be pre-approved before you can schedule
- PSI sends you scheduling instructions after Board approval
Books and codes for this exam (open book)
The Georgia Conditioned Air Contractor exam (Class I Restricted and Class II Unrestricted) is open book. You can bring the approved references below into the test, and they’re allowed to be tabbed and highlighted.
| Reference | Edition | How it’s used |
|---|---|---|
| International Mechanical Code (IMC) | 2024 | Allowed in exam |
| International Fuel Gas Code (IFGC) | 2024 | Allowed in exam |
| NFPA 70: National Electrical Code (NEC) | 2023 or 2020 | Allowed in exam |
| ACCA Manual D: Residential Duct Systems | 3rd edition | Allowed in exam |
| ACCA Manual J: Residential Load Calculation (Full Edition) | 8th edition | Allowed in exam |
| Refrigeration & Air Conditioning Technology | Not stated | Allowed in exam |
| Georgia NASCLA Contractor’s Guide to Business, Law and Project Management (Construction Industry Licensing Board) | 5th edition | Allowed in exam |
| Carrier System Design Manual Part 1: Load Estimating | Not stated | Allowed in exam |
| Carrier System Design Manual Part 2: Air Distribution | Not stated | Allowed in exam |
| Carrier System Design Manual Part 3 | Not stated | Allowed in exam |
| OSHA 1926: Construction Industry Regulations | Not stated | Allowed in exam |
| ACCA Duct Calculation Slide Rule | Not stated | Allowed in exam |
| International Energy Conservation Code (IECC) | 2015 | Allowed in exam |
| Georgia State Amendments to the IFGC (free download, print it) | Not stated | Allowed in exam |
| Georgia State Amendments to the IMC (free download, print it) | Not stated | Allowed in exam |
| Flexible Duct Performance and Installation Standards (free download, print it) | Not stated | Allowed in exam |
| Low Pressure Boilers — Class II (Unrestricted) only | Not stated | Allowed in exam |
Starting May 1, 2026, the exams are based on the 2024 editions of the IFGC and IMC.
Prep for the Georgia HVAC contractor exam
Our exam prep course, Total Prep and complete bundle for the Georgia HVAC contractor exam. Prices are coming soon.
Books for this exam
-

2015 International Energy Conservation Code
Price coming soon -

2024 International Fuel Gas Code
Price coming soon -

2024 International Mechanical Code
Price coming soon -

Low Pressure Boilers
Price coming soon -

Manual D: Residential Duct Systems, 3rd edition
Price coming soon -

Manual J: Residential Load Calculation (8th Edition, Version 2)
Price coming soon -

NASCLA Contractors Guide to Business, Law and Project Management, Georgia Construction Industry Licensing Board, 5th edition
Price coming soon -

NFPA 70, National Electrical Code: 2023 Edition
Price coming soon -

Refrigeration & Air Conditioning Technology
Price coming soon -

Book Tabs
Price coming soon
Renewing your Georgia HVAC contractor license
Before each renewal, Georgia conditioned air licensees have to finish continuing education. Renewal costs $100. We couldn’t confirm the renewal cycle or the number of CE hours, so ask the Board.
Renewal cycle
Not stated
CE hours
Required (we couldn’t confirm the hours)
Renewal fee
$100
Late penalty
Not stated
Georgia HVAC contractor CE
Hours, deadlines, required topics and the renewal steps, in one guide.
Licensed in another state?
Georgia has reciprocity agreements in place with three states. We couldn’t confirm the exact terms, so ask the Board what gets waived before you apply.
Louisiana: reciprocity agreement
We couldn’t confirm the terms. Check with the Board on what’s waived for Louisiana license holders.
South Carolina: reciprocity agreement
We couldn’t confirm the terms. Check with the Board on what’s waived for South Carolina license holders.
Texas: reciprocity agreement
We couldn’t confirm the terms. Check with the Board on what’s waived for Texas license holders.
Any other state: no agreement
You’ll apply as a new applicant and need to meet Georgia’s experience, course and exam rules.
City and county rules in Georgia
The state issues your conditioned air license, but permits and inspections are still up to the city or county where the job is.
What the state handles
- Class I and Class II Conditioned Air Contractor licenses
- Pre-approval for the exam, which PSI gives
- Continuing education ahead of every renewal
- Minimum state codes and amendments (via the Georgia DCA)
What cities & counties handle
- Mechanical permits
- Inspections
- Local business licensing
The board that licenses Georgia HVAC contractors
Licensing authority
Georgia State Board of Conditioned Air Contractors
What the board does
- Grants and renews Class I and Class II conditioned air licenses
- Decides who can sit for the exam
- Signs off on design courses and continuing education
- Manages reciprocity with Louisiana, South Carolina and Texas
Georgia HVAC contractor license: common questions
Do you need a license for HVAC work in Georgia?
Yes. Before you bid, offer or do conditioned air work, you need a Conditioned Air Contractor license.
How do Georgia’s Class I and Class II HVAC licenses differ?
Class I covers systems with up to 175,000 BTU of heating and 60,000 BTU of cooling. Class II has no size limit.
How much experience does a Georgia HVAC license require?
You need 8,000 hours for Class I or 10,000 hours for Class II.
Is Georgia’s conditioned air license exam open book?
Yes. You get 7 hours for 120 questions, and you can bring your approved references with tabs and highlights. The exam has used the 2024 IFGC and IMC since May 1, 2026.
Who runs the Georgia HVAC license exam?
PSI does. After the Board approves you, PSI sends instructions so you can book your exam date and time.
Does Georgia offer reciprocity for HVAC licenses?
Yes. Georgia has agreements with Louisiana, South Carolina and Texas, but ask the Board about the exact terms before you apply.
Does a Georgia HVAC license require continuing education?
Yes. Licensees in Georgia have to complete continuing education ahead of every renewal.
Where this information comes from
- Georgia State Board of Conditioned Air Contractors
- Georgia DCA, Current State Minimum Codes for Construction
- PSI, Georgia Conditioned Air Contractors Candidate Information Handbook
- Georgia Secretary of State, GOALS fee schedules by board
Last updated October 27, 2026. Spot something out of date? Tell us.
Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Georgia State Board of Conditioned Air Contractors.