
Home Licenses Low Voltage License Georgia
Low Voltage Contractor · Unrestricted, General, Alarm & Telecom
Georgia Low Voltage License: Requirements, Exam and How to Apply
This guide walks you through choosing a low voltage category, documenting your experience, passing the PSI exam and applying in GOALS, all based on what the Georgia State Board of Low Voltage Contractors requires.
Last updated October 27, 2026 from Georgia State Board of Low Voltage Contractors requirements
Exam time
4 hrs
Open-book General Systems exam
Time to get license
2,000 hrs
Installation work in the category you’re licensed for
Continuing ed
Not stated
Ask the Board when you renew
Do you need a Georgia low voltage license?
Yes. In Georgia, any low voltage contractor needs a state license before bidding on or doing low voltage work. The Georgia State Board of Low Voltage Contractors offers four categories, and the one you hold decides what you can install.
You need the license when
- You bid on any kind of low voltage work
- You put in general low voltage systems like intercoms, sound or public address systems, antennas, satellite dishes, low voltage lighting or irrigation wiring
- You put in alarm systems for fire, burglary, robbery, equipment failure or medical emergencies
- You put in telecom systems carrying two-way voice or data
Exceptions
- We couldn’t confirm any exemptions, so talk to the Board before you decide you don’t need a license
- A license only reaches its own category: LV-G doesn’t let you do alarm or telecom work, and LV-A and LV-T don’t cross over
What happens if you work unlicensed
Georgia’s licensing law makes it a violation to bid or work without a license. The Board looks into complaints, disciplines license holders and sends unlicensed activity on for enforcement, so have your license before you accept a job.
How to get a Georgia low voltage license in 6 steps
- Pick a category Before you start
Choose LV-G, LV-A, LV-T or LV-U. The experience you show has to fit the category you’re applying for. - Write up your experience Before you apply
Fill out the experience affidavit to show 2,000 or more hours of installation work, including what you did, your duties and how much responsibility you had. Up to 6 months can come from electronics courses at an engineering or trade school. - Get three references Before you apply
Name 3 people familiar with your low voltage work. One or more of them must be a licensed low voltage contractor. - Submit in GOALS
Fill out your application in the GOALS portal, add your documents and pay. You’ll go through fingerprinting and a criminal background check. - Get approved and booked ~2 weeks’ notice
The Board has to approve you before you can sit for the exam. When your packet is complete, PSI reaches out with a date and time, usually around two weeks in advance. - Take and pass the exam Exam day
You test at a PSI center in one of Georgia’s bigger cities. You can use your books, and PSI sends your results to you.
Georgia low voltage application checklist
Georgia’s application on a single page
- Picked a category: LV-G, LV-A, LV-T or LV-U
- Experience affidavit with 2,000+ hours
- 3 references, with 1 licensed low voltage contractor
- Fingerprints and criminal background check
- Application, documents and fees sent through GOALS
- Board approval, followed by a passing PSI exam
Georgia low voltage license classes
Georgia divides low voltage work into four categories. Choose the one that fits what you do, since your experience must come from that same category.
LV-U Broadest scope
Unrestricted
Covers every kind of low voltage electrical work, including all the work allowed under LV-G, LV-A and LV-T.
| Exam | Unrestricted exam |
| Limit | Not stated |
LV-G Most common
General
Limited to general low voltage systems like intercoms, call alert, sound, public address, antennas, low voltage lighting and irrigation wiring.
| Exam | General Systems exam |
| Limit | Not stated |
LV-A Alarm
Alarm
General low voltage work plus alarm systems, meaning devices that detect burglary, fire, robbery, medical emergencies or equipment failure.
| Exam | Alarm exam |
| Limit | Not stated |
LV-T Telecom
Telecommunications
General low voltage work plus telecom, meaning switching systems that carry two-way voice or data service.
| Exam | Telecommunications exam |
| Limit | Not stated |
Requirements for each Georgia low voltage class
All four categories call for the same 2,000 hours, three references and a background check. The difference is the type of installation experience you need to prove.
| Requirement | LV-G | LV-A or LV-T | LV-U |
|---|---|---|---|
| Experience | 2,000 hrs installing general low voltage systems | 2,000 hrs, with alarm or telecom installation included | 2,000 hrs, with both alarm and telecom installation included |
| Education credit | Up to 6 months can come from electronics courses | Up to 6 months can come from electronics courses | Up to 6 months can come from electronics courses |
| References | 3, with at least 1 licensed low voltage contractor | 3, with at least 1 licensed low voltage contractor | 3, with at least 1 licensed low voltage contractor |
| Experience affidavit | Required | Required | Required |
| Exam | General Systems | Alarm or Telecommunications | Unrestricted |
| Background check | Fingerprints and a criminal check | Fingerprints and a criminal check | Fingerprints and a criminal check |
The Georgia low voltage exam
PSI gives Georgia’s low voltage exams, and they’re open book. Since you can tab and highlight the approved references, it pays to know your way around your books.
Format
Open book
Questions
50 (General), 75 (Telecom)
Passing score
70
Exam vendor
PSI
Format & topics
- General Systems: 4 hours for 50 questions, and you need a 70 to pass
- Telecommunications: 75 questions
- Covers laws and regulations, blueprint reading, distribution methods, installer safety, interior and exterior cabling, and documentation
- Every exam uses the NEC 2023, OSHA 1926 and the Georgia NASCLA contractors guide (5th ed.). Alarm and unrestricted candidates also need NFPA 72 (2016), NFPA 101 (2015) and UL 681
- You can tab and highlight your books
Retakes
- We couldn’t confirm the retake rules
- You must be pre-approved by the Board before you schedule
- PSI books your exam and sends your results
- Check with the Board or PSI on retake fees and wait times
Books and codes for this exam (open book)
All Georgia low voltage exams (Unrestricted, Alarm, General and Telecommunications) are open book. You can bring the approved references below into the test, and they’re allowed to be tabbed and highlighted; the exam each book applies to is shown in the title.
Prep for the Georgia low voltage exam
Our exam prep course, Total Prep and complete bundle for the Georgia low voltage exam. Prices are coming soon.
Books for this exam
-

NASCLA Contractors Guide to Business, Law and Project Management, Georgia Construction Industry Licensing Board, 5th edition
Price coming soon -

NFPA 101, Life Safety Code, 2015 Edition
Price coming soon -

NFPA 70, National Electrical Code: 2023 Edition
Price coming soon -

NFPA 72: National Fire Alarm and Signaling Code, 2016
Price coming soon -

Publication 15 (Circular E), Employer’s Tax Guide
Price coming soon -

The ADA: Your Responsibilities as an Employer
Price coming soon -

UL 681, Installation and Classification of Burglar and Holdup Alarm Systems
Price coming soon -

Book Tabs
Price coming soon
Renewing your Georgia low voltage license
Renewing a Georgia low voltage license costs $100. We couldn’t confirm the renewal cycle or any continuing education rules, so look at your license record in GOALS or reach out to the Board before your license runs out.
Renewal cycle
Not stated
CE hours
Not stated
Renewal fee
$100
Late penalty
Not stated
Licensed in another state?
We couldn’t find any reciprocity agreement for Georgia low voltage licenses.
No reciprocity in place
Expect to apply as a new applicant, with an experience affidavit, references and the exam. If you’re licensed in another state, check with the Board.
City and county rules in Georgia
A state license lets you do low voltage contracting anywhere in Georgia, but each local government still runs its own permits and inspections.
What the state handles
- Low voltage licenses across four categories
- Reviewing experience and approving exam candidates
- Exams, given by PSI
- Disciplining license holders
What cities & counties handle
- Permits and inspections, where they’re required
- Local business licensing
- Enforcing local codes
The board that licenses Georgia low voltage contractors
Licensing authority
Georgia State Board of Low Voltage Contractors
Professional Licensing Boards, Georgia Secretary of State
844-753-7825
What the board does
- Grants LV-U, LV-G, LV-A and LV-T licenses
- Reviews references and experience affidavits
- Decides who can sit for the PSI exam
- Disciplines license holders
Georgia low voltage license: common questions
Do you need a license for low voltage work in Georgia?
Yes. Before you bid on or take on any low voltage job, Georgia says you must hold a low voltage contractor license.
How do Georgia’s LV-U, LV-G, LV-A and LV-T licenses differ?
LV-G is limited to general low voltage systems. LV-A adds alarms, LV-T adds telecom, and LV-U covers every kind of low voltage work.
How much experience does a Georgia low voltage license require?
You need 2,000 or more hours of installation experience in your category. Up to 6 months can come from electronics courses at an engineering or trade school.
Is Georgia’s low voltage license exam open book?
Yes. You can bring the approved references with tabs and highlights. The General Systems exam gives you a 4-hour limit for 50 questions, and you need a 70 to pass.
Who runs the Georgia low voltage license exam?
PSI does. Once the Board approves you, PSI gets in touch with a date and time, usually around two weeks out, and sends you your results.
Do you need references for a Georgia low voltage license?
Yes. You name 3 people who know your low voltage work, and one or more must be a licensed low voltage contractor.
Does a Georgia low voltage license require a background check?
Yes. Your application includes fingerprinting and a criminal background check.
Where this information comes from
- Georgia State Board of Low Voltage Contractors
- Georgia Secretary of State, GOALS licensing portal
- PSI, Georgia Low Voltage Contractor exam information
- Georgia Secretary of State, GOALS fee schedules by board
Last updated October 27, 2026. Spot something out of date? Tell us.
Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Georgia State Board of Low Voltage Contractors.