
Home Licenses General Contractor License Georgia
General Contractor · Commercial & Residential
Georgia General Contractor License: Requirements, Exam and How to Apply
This plain-English guide covers how to qualify for a Georgia General Contractor license, pass the two exams and apply. It also explains the two residential licenses, so you can choose the one that fits.
Last updated October 27, 2026 from Georgia State Licensing Board for Residential and General Contractors requirements
Exam time
7.5 hrs
330 min for NASCLA and 120 min for Business & Law
Time to get license
1–4 yrs
1 year if you have a related degree, 4 years if you don’t
Continuing ed
Not stated
Ask the Board when you renew
Do you need a Georgia general contractor license?
Yes. Georgia requires residential and general contractors to hold a state license before they bid on a job or do any work. A General Contractor license lets you take on any type of building, though financial limits still apply.
You need the license when
- Bidding on or doing contractor work in Georgia
- Building public, private, commercial, industrial or institutional buildings and structures
- Working under a contract with the property owner, or being hired by the owner directly
- Taking on work beyond the homes and light commercial buildings the residential licenses allow
Exceptions
- A GC license doesn’t cover electrical, plumbing, conditioned air, low voltage or utility work. That has to be done by a contractor licensed in the trade.
- Some other exceptions are written into Georgia law. Check with the Board before you count on one.
What happens if you work unlicensed
We couldn’t confirm specific fine amounts. Generally, the Board can look into and discipline anyone who bids or contracts without the license they need, so get licensed before you take a job.
How to get a Georgia general contractor license in 6 steps
- Check your experience Before you apply
With a bachelor’s degree in engineering, architecture, construction management, building construction or a related field, you need 1 year in construction. Without one, you need 4 years. Choose a project you managed in the past 5 years to document. - Get approved to test Before you book
You can’t book your Georgia exams until you’re pre-approved. The best place to begin is the Board’s how-to guide for general contractors, which walks you through it. - Book your exams with PSI After approval
Schedule online with PSI or by calling 800-733-9267. You’ll find test centers in the bigger cities around the state. - Pass the two exams Exam day
You’ll take NASCLA General Building (115 questions; you need 81 right) and Business & Law (50 questions; you need 35 right). You can use references on both. - Line up your insurance Before you apply
You need general liability of $500,000 or more per occurrence and a current, signed certificate of insurance. If you have 3 or more employees, add workers’ comp. - Apply to the Board Final step
Last, you apply to the Georgia State Licensing Board for Residential and General Contractors. Have questions along the way? Call 844-753-7825 to reach the Professional Licensing Boards division.
Georgia general contractor application checklist
Everything for your Georgia application on one page
- 1 year of experience if you have a related degree, 4 years if not
- A project you managed within the past 5 years
- Pre-approval from the Board to test
- A passing score on the NASCLA and Business & Law exams
- A general liability certificate for $500,000 per occurrence
- Workers’ comp, if you have 3 or more employees
Georgia general contractor license classes
One Board oversees Georgia’s three main contractor licenses. With a General Contractor license you can build any type of building, as long as you stay within your financial limits. The two residential licenses are limited by the type and size of building.
GC Covered here
General Contractor
Covers private, public, commercial, industrial, institutional and other buildings and structures, with no limit on the type of work.
| Exam | NASCLA plus Business & Law |
| Limit | Subject to financial limits |
RBC Homes
Residential Basic
Covers detached homes for one or two families and one-family townhouses of up to three stories, along with their accessory buildings.
| Exam | We couldn’t confirm |
| Limit | Up to 3 stories |
RLC Homes plus light commercial
Residential Light Commercial
Covers all Residential Basic work, plus light commercial buildings that are multifamily or multiuse and built of wood, light gauge metal, brick veneer or prefab construction.
| Exam | We couldn’t confirm |
| Limit | Less than 4 stories and 25,000 sq ft (up to 50,000 sq ft for pre-engineered steel) |
Requirements for each Georgia general contractor class
All General Contractor applicants take the same two exams and need the same insurance. The only difference is how much experience you need, which depends on whether you have a related degree.
| Requirement | With a related bachelor’s degree | Without a related degree |
|---|---|---|
| Experience | 1 year working in construction | 4 years working in construction |
| Qualifying project | 1 project you managed within the past 5 years | 1 project you managed within the past 5 years |
| Exams | NASCLA General Building plus Business & Law | NASCLA General Building plus Business & Law |
| General liability coverage | $500,000 for each occurrence | $500,000 for each occurrence |
| Workers’ compensation | Needed if you have 3+ employees | Needed if you have 3+ employees |
| Financial statements | Only if the Board asks | Only if the Board asks |
The Georgia general contractor exam
In Georgia, GC applicants sit for two exams: the Georgia Business & Law exam and the NASCLA General Building Contractor exam. You can bring references into both, tabbed and highlighted.
Format
Open book
Questions
115 + 50
Passing score
81 of 115 and 35 of 50
Exam vendor
PSI
Scoring and content
- NASCLA General Building: 115 questions in 330 minutes; you need 81 right to pass
- Business & Law: 50 questions in 120 minutes; you need 35 right to pass
- NASCLA covers site work, concrete, masonry, metals, wood, finishes, and mechanical, plumbing and electrical systems, among other topics
- On Business & Law, expect questions about contracts and lien law, licensing, estimating, money management, labor and tax law, plus risk and safety
- Among the references: the Georgia NASCLA Contractors Guide to Business, Law and Project Management, ICC A117.1-2017, OSHA 1926, ACI 318-19 and the 2024 IBC
Retaking the exam
- How long you wait to retake: not published
- Retake fee: not published
- You have to be pre-approved before you book
- Call PSI at 800-733-9267 to reschedule or retake
Books and codes for this exam (open book)
Both Georgia general contractor exams, the NASCLA General Building Contractor exam and the Business & Law exam, are open book. You can bring the approved references below into the test, and they’re allowed to be tabbed and highlighted.
Prep for the Georgia general contractor exam
Buy the course on its own, or a package that comes with more.
Most complete
Complete Bundle
Every book the exam lists, plus all of our prep, in one order.
Everything in Total Prep, plus
- All 25 reference books the exam lists, in the editions the exam bulletin names
Course + exam-room kit
Total Prep
Everything for the exam except the books themselves.
Everything in the course, plus
- Highlighting guide: what to mark in each book you can bring into the exam room
- Book tabs for each of those books
Online course
Exam Prep Course
Self-paced online prep for the Georgia general contractor exam.
What you get
- Lessons that follow the exam’s content outline
- Quizzes after each lesson
- Practice questions in the exam’s format
- Study at your own pace, online
Books for this exam
This exam is open book and lists 25 references.
Mechanical and Electrical Systems for Construction Managers
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Which exams: NASCLA General Building exam.
- What it covers: A book on the mechanical and electrical systems in buildings, aimed at contractors and construction managers. It covers HVAC, plumbing and electrical systems, plus added chapters on sprinkler and fire alarm systems. Construction managers rely on it to understand these trades and coordinate them.
ICC
2017
ICC A117.1: Standard for Accessible and Usable Buildings and Facilities
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Which exams: NASCLA General Building exam.
- Edition the exam uses: 2017.
- What it covers: This standard gives the technical requirements that let people with physical disabilities get to, enter and use sites, buildings and building elements. Building codes cite it for accessible design. Contractors and code officials rely on it for accessibility questions on licensing exams that permit it.
BCSI
Building Component Safety Information (BCSI)
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Which exams: NASCLA General Building exam.
- What it covers: This jobsite safety guide explains how to handle, install, restrain and brace metal plate connected wood trusses. Its chapters are written for truss manufacturers, framers, designers and building officials. General and residential contractor candidates study it for questions on installing roof and floor trusses.
2016
Carpentry and Building Construction, Student Edition
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Which exams: NASCLA General Building exam.
- Edition the exam uses: 2016.
OSHA
1926
OSHA 1926: Construction Industry Regulations
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Which exams: NASCLA General Building exam.
Construction Jobsite Management
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Which exams: NASCLA General Building exam.
- Edition the exam uses: 5th edition.
- What it covers: The book shows how the project manager, superintendent and field engineer run a construction job, covering contract documents, scheduling, cost control, subcontractors, safety and closeout. New to this edition is material on building information modeling and lean methods. General contractor candidates study from it and also use it as an exam reference.
Construction Project Management
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Which exams: NASCLA General Building exam.
NASCLA Contractor’s Guide to Business, Law and Project Management, Basic Edition
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Which exams: NASCLA General Building exam.
- What it covers: A guide to business, law and project management for contractors, in three parts: starting a business; field fundamentals like bids, contracts, employment law and safety; and office administration, including accounting, payroll and taxes. It’s used by candidates preparing for the business and law portion of contractor license exams.
Erector’s Manual: Standards and Guidelines for the Erection of Precast Concrete Products
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Which exams: NASCLA General Building exam.
- What it covers: This manual gives standards and guidelines for erecting plant-made precast and prestressed concrete members in the field. It lays out safe, consistent practices for erectors and the firms that hire them. General contractors and erectors use it as a precast installation reference.
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Which exams: NASCLA General Building exam.
- Edition the exam uses: 2nd edition.
- What it covers: This book introduces green building, explaining sustainable design and construction methods and how the LEED rating system works. It’s written for builders, designers and students who are new to the subject. Contractors read it for background on green building questions.
The Gypsum Construction Handbook
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Which exams: NASCLA General Building exam.
- Edition the exam uses: 7th edition.
- What it covers: This handbook covers construction with gypsum products: drywall, plaster, ceilings, partitions, fire-rated and sound-rated assemblies, finishing and installation practice, plus design data and details. Drywall contractors, general contractors and estimators rely on it, and exam candidates use it for related questions.
Technical Digest No. 9: Handling and Erection of Steel Joists and Joist Girders
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Which exams: NASCLA General Building exam.
- What it covers: Published by the Steel Joist Institute, this guide explains how to unload, store, erect and inspect open web steel joists and joist girders, with coverage of bridging and panelized erection. A new chapter on erection engineering arrives in the fourth edition. Erectors and general contractors use it as a field reference for licensing exams.
IBC
2024
International Building Code (IBC)
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Which exams: NASCLA General Building exam.
- Edition the exam uses: 2024.
- What it covers: This model code sets structural design, fire safety, means of egress and general construction rules for commercial buildings and most others. General contractors, architects and code officials rely on it as a primary reference for licensing exams that permit it.
ACI
318
ACI 318-19 (22): Building Code Requirements for Structural Concrete and Commentary
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Which exams: NASCLA General Building exam.
- Edition the exam uses: 2019 (2022).
- What it covers: This is the American Concrete Institute’s structural concrete code, with the commentary printed next to the code text. It sets design and construction rules for reinforced and prestressed concrete members, anchoring, formwork and quality control. Engineers and general contractors consult it for exams that involve concrete work.
Training and Certification of Field Personnel for Unbonded Post-Tensioning
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Which exams: NASCLA General Building exam.
- What it covers: The Post-Tensioning Institute’s manual for its Level 1 unbonded post-tensioning certification workshop. It covers the theory, materials, installation and inspection of single strand systems in elevated slabs, and it has glossaries in English and Spanish. Field crews and contractors use it on licensing exams that permit it.
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Which exams: NASCLA General Building exam.
- What it covers: A textbook on working with brick, concrete block, stone and poured concrete. It starts with masonry materials, tools and safety, then moves to laying techniques, estimating and careers in the trade. Masonry students and contractor license candidates use it to study.
Pipe and Excavation Contracting, Revised
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Which exams: NASCLA General Building exam.
- What it covers: This manual explains how to start and run an underground utility business and gives practical instruction on trenching, laying pipe and making connections. The revised edition brings equipment, excavation methods, safety rules and materials up to date. Site and utility contractors use it as a licensing exam reference.
Principles and Practices of Commercial Construction
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Which exams: NASCLA General Building exam.
- Edition the exam uses: 11th edition.
- What it covers: This book traces a commercial building project from site evaluation and layout through foundations, concrete, masonry, steel and timber framing, floors, roofs and interior finishes. It explains the methods and materials of non-residential construction and includes review questions. General contractor candidates use it to study and as an exam reference.
Roofing Construction & Estimating, Revised
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Which exams: NASCLA General Building exam.
- What it covers: This hands-on guide covers how to install roofs and estimate their cost. It addresses asphalt shingles, wood shakes, tile, slate, metal and low-slope systems, along with take-off methods, waste factors and sample estimates. Roofing contractors and general contractor candidates use it for exam questions on installation and bidding.
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Which exams: NASCLA General Building exam.
- What it covers: Published by the Concrete Reinforcing Steel Institute, this book shows how rebar gets positioned in concrete construction. It explains spacing between bars, how bars are supported and how much concrete cover they need. When a licensing exam permits it, ironworkers, concrete crews and general contractors use it as their reference.
SDI
SDI Manual of Construction with Steel Deck
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Which exams: NASCLA General Building exam.
- Edition the exam uses: 3rd edition.
- What it covers: The Steel Deck Institute’s field manual on using and installing steel floor and roof deck correctly. This edition references the SDI standard for quality control and quality assurance of deck installation. Inspectors, erectors and contractors keep it on hand as a reference for deck work.
Contractor’s Guide to Quality Concrete Construction
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Which exams: NASCLA General Building exam.
- Edition the exam uses: 4th edition.
- What it covers: Written for contractors, this field guide covers concrete mixtures, specifications, formwork, reinforcement, joints, placing and finishing, typical field problems, safety and legal topics. Every chapter closes with review questions. Concrete contractors and people taking general contractor exams rely on it as a hands-on reference.
EPA
EPA: Developing Your Stormwater Pollution Prevention Plan (free download, print it)
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Which exams: NASCLA General Building exam.
- What it covers: This EPA guide takes construction site operators step by step through writing a stormwater pollution prevention plan. It explains who has to comply, what goes in the plan, and how to manage erosion and sedimentation under Clean Water Act permit rules. Contractors use it to build site plans and to study stormwater requirements.
EIFS
2017
ANSI/EIMA 99-A: Standard for Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Which exams: NASCLA General Building exam.
- Edition the exam uses: 2017.
- What it covers: This American National Standard sets minimum requirements for specifying and installing exterior insulation and finish systems, both with and without drainage. It addresses generic materials, details and design considerations, and sends users to manufacturers for instructions on specific systems. Stucco and plaster contractors consult it as a reference.
How it’s used on this exam
- On exam day: You can bring this book into the exam room, tabbed and highlighted.
- Which exams: Business & Law exam.
- Edition the exam uses: 3rd edition.
- What it covers: A guide to launching and running a contracting business, in three parts: planning and starting the business, running construction operations, and administration. This Georgia version is written for the residential and general contractor licensing board, and Georgia candidates use it for the business and law exam.
How it’s used on this exam
- On exam day: Tabs go on the books you bring into the exam room.
Your book list
Every book on this list
Or get them in the Complete Bundle
Renewing your Georgia general contractor license
Renewing a Georgia General Contractor license costs $100. We couldn’t confirm the renewal cycle or any continuing education rules, so ask the Board before your renewal comes due.
Renewal cycle
Not stated
CE hours
Not stated
Renewal fee
$100
Late penalty
Not stated
Licensed in another state?
Georgia has reciprocity with a few states. We know which states, but not exactly what each agreement waives, so check the details with the Board before you apply.
Louisiana: General Contractor reciprocity
Louisiana has a reciprocity agreement with Georgia that covers General Contractors. Ask the Board which exams or requirements you can skip.
Mississippi: General and Residential Contractor reciprocity
Georgia’s agreements with Mississippi cover both General and Residential Contractors. Ask the Board which exams or requirements you can skip.
Tennessee: General Contractor reciprocity
Tennessee has a reciprocity agreement with Georgia that covers General Contractors. Ask the Board which exams or requirements you can skip.
South Carolina: Residential Contractor reciprocity
This one only applies to Residential Contractors. General Contractors aren’t included.
Every other state: no agreement
You apply as a new applicant, show the required experience and pass both exams.
City and county rules in Georgia
A state license lets you build anywhere in Georgia, but permits and inspections are still handled by the city or county where you work.
What the state handles
- Licenses for Residential and General Contractors
- Applications and pre-approval to test
- Experience and insurance rules
- Reciprocity with other states
What cities and counties handle
- Building permits
- Inspections
- Local business licenses and registration
Who oversees general contractors in Georgia
Licensing authority
Georgia State Licensing Board for Residential and General Contractors
Professional Licensing Boards division, Georgia Secretary of State
844-753-7825
What the board does
- Issues the Residential and General Contractor licenses
- Approves applicants before they book exams
- Sets the experience, insurance and financial rules
- Handles reciprocity agreements with other states
Georgia general contractor license: common questions
Do you need a license to bid on a contracting job in Georgia?
Yes. In Georgia, residential and general contractors must be licensed before bidding on or doing any work.
How much experience do you need for a Georgia GC license?
You need four years in construction. If you have a bachelor’s degree in engineering, architecture, construction management, building construction or a related field, one year is enough. Either way, you submit one project you managed within the past 5 years.
Which exams do you take for a Georgia general contractor license?
There are two. The NASCLA General Building Contractor exam has 115 questions and you need 81 right. The Georgia Business & Law exam has 50 questions and you need 35 right. Once you’re pre-approved, you book both with PSI.
Can you use books on the Georgia general contractor exam?
Yes. You can bring your approved references into both exams, and tabbing and highlighting them is allowed.
What insurance does a Georgia general contractor need?
You need general liability of $500,000 or more per occurrence, backed by a current, signed certificate. If you have 3 or more employees, you also need workers’ comp.
Can a Georgia general contractor do electrical or plumbing work?
No. Only a contractor licensed in the trade can do electrical, plumbing, conditioned air, low voltage or utility work.
Does Georgia accept a contractor license from another state?
Only if there’s a reciprocity agreement. For General Contractors, Georgia has them with Louisiana, Mississippi and Tennessee. For Residential Contractors, the partner states are Mississippi and South Carolina.
Where this information comes from
- Georgia Secretary of State, How-to guide for general contractors
- PSI, Candidate exam scheduling
- US EPA, Developing Your Stormwater Pollution Prevention Plan (exam reference, PDF)
- NASCLA Contractors Guide to Business, Law and Project Management, Georgia State Licensing Board for Residential and General Contractors, 3rd Edition
- Georgia Secretary of State, GOALS fee schedules by board
- PSI Candidate Information Bulletin, Georgia Residential and General Contractors
Last updated October 27, 2026. Spot something out of date? Tell us.
Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Georgia State Licensing Board for Residential and General Contractors.