
Home Licenses Gas Fitter License District of Columbia
Gas Pipe Fitter · Journeyman & Master
District of Columbia Gas Fitter License: Requirements, Exam and How to Apply
Here’s how you become a Journeyman or Master Gas Pipe Fitter in DC, covering the experience requirement, the open-book PSI exams and the DLCP application.
Last updated October 27, 2026 from DC Department of Licensing and Consumer Protection requirements
Exam time
3 hrs
For the journeyman exam; we couldn’t confirm the master exam’s length
Time to get license
~4 yrs
Journeyman takes 8,000 apprentice hours; master takes 4 years more
Continuing ed
Not required
Neither journeyman nor master needs CE
Do you need a District of Columbia gas fitter license?
Yes. If you design, install, test or extend nonindustrial gas piping and appliances in DC, anywhere from the meter outlet to the appliance connections, DLCP requires you to hold a Gas Pipe Fitter license. The District issues Journey, Master and Contractor Gas Pipe Fitter licenses.
You need the license when
- You install, test or operate gas piping systems and appliances that aren’t industrial
- You run gas piping from the meter set assembly (or the service regulator) to the appliance inlets
- You bring in, maintain or extend a gas supply in a building or on a property
- You vent gas fixtures and their appurtenances
- You dig up a street, alley or other area to hook a building up to a gas service pipe
Exceptions
- Apprentices working under licensed supervision toward the 8,000 hours they need
- This license only covers nonindustrial work, so industrial gas systems aren’t part of it
What happens if you work unlicensed
If you do gas fitting work in DC without the proper license, DLCP can take enforcement action, such as fines and stop-work orders. Ask DLCP about current penalties.
How to get a District of Columbia gas fitter license in 6 steps
- Gain your experience First step
Work 8,000 hours over 4 or more years as an apprentice plumber or gasfitter. Or qualify with a mechanical engineering degree and 2 years of experience someone has verified. - Get pre-approved for the exam Before testing
Your first stop is the DC Board of Industrial Trades website: open an account there, then get cleared to take your exam. - Book with PSI Before testing
Use PSI’s candidate site at psiexams.com to book, or phone them at 855-557-0616. - Pass your exam Test day
For journeyman, you get 3 hours for 50 questions. The master exam has 75 questions. You can use bound references on both. - Apply with DLCP Once you pass
You can apply on the web via DLCP, or you can phone 202-671-4500 instead. - Step up to master 4+ yrs on
Once you’ve been a licensed journeyman for 4 years, you can take the Master Gas Pipe Fitter exam.
District of Columbia gas fitter application checklist
The District of Columbia application on a single page
- Records of 8,000 apprentice hours (or a degree and 2 years)
- A Board of Industrial Trades website account
- Pre-approval for the exam
- A bound, tabbed copy of the International Fuel Gas Code
- A passing score on the PSI exam
- Your application sent in through DLCP
District of Columbia gas fitter license classes
The District issues Journey, Master and Contractor Gas Pipe Fitter licenses. Below, we cover the Journeyman and Master levels, and each one has a separate exam.
JRY Starting level
Journeyman Gas Pipe Fitter
Covers gas piping and appliances that aren’t industrial: you design, install, test and extend them, starting at the meter outlet and ending at the appliance connections.
| Exam | 50 questions; open book |
| Limit | Not stated |
MST Higher level
Master Gas Pipe Fitter
DC’s highest gas fitting license. It’s for experienced journeymen who’ve spent 4 or more years as a licensed Journeyman Gas Pipe Fitter.
| Exam | 75 questions; open book |
| Limit | Not stated |
Requirements for each District of Columbia gas fitter class
To qualify as a journeyman, you can use apprentice hours, an engineering degree with experience, or a combination the Board accepts. To qualify as a master, you need 4 years as a licensed journeyman.
| Requirement | Journeyman | Master |
|---|---|---|
| Experience | 8,000 hrs over 4 or more yrs as an apprentice plumber or gasfitter | 4+ yrs licensed as a Journeyman Gas Pipe Fitter |
| Education path | A mechanical engineering degree and 2 yrs of hands-on experience, verified by a master | Not stated |
| Equivalent the Board approves | Similar experience or schooling the Board accepts | Not stated |
| Exam | Journeyman Gas Pipe Fitter exam (50 questions) | Master Gas Pipe Fitter exam (75 questions) |
| Continuing education | Not required | Not required |
| Minimum age | Not stated | Not stated |
The District of Columbia gas fitter exam
PSI gives a separate exam for each level. You can use books on both, and your bound references can be tabbed and highlighted.
Format
Open book
Questions
50 / 75
Passing score
Not stated
Exam vendor
PSI
Scoring and content
- Journeyman: 3 hours for 50 questions
- Journeyman subjects: pipe sizing and installation, venting, appliances, materials, theory and terminology
- Master: 75 questions; we couldn’t confirm the time limit
- The master exam also covers special requirements, operating principles and plan reading
- Reference book: the 2012 edition of the International Fuel Gas Code
Retakes
- We couldn’t confirm the retake rules
- Your references have to be bound, but you can tab and highlight them
- Call PSI at 855-557-0616 if you need to reschedule
Books and codes for this exam (open book)
The District of Columbia Journeyman and Master Gas Pipe Fitter exams are open book. You can tab and highlight the reference below and use it during the test, as long as it’s bound.
| Reference | Edition | How it’s used |
|---|---|---|
| International Fuel Gas Code (IFGC) | 2012 | Allowed in exam |
Prep for the District of Columbia gas fitter exam
Our exam prep course, Total Prep and complete bundle for the District of Columbia gas fitter exam. Prices are coming soon.
Books for this exam
Renewing your District of Columbia gas fitter license
Neither Journeyman nor Master Gas Fitters need continuing education in DC. Plumber and gasfitter licenses last up to 2 years and expire on March 31 of even-numbered years. Renewing costs $110 for a journeyman and $155 for a master, and there’s a $50 late fee.
Renewal cycle
Up to 2 years
CE hours
Not required
Renewal fee
$110–$155
Late penalty
$50
Licensed in another state?
There are no DC reciprocity agreements for Journeyman or Master Gas Fitters.
No reciprocity agreements in place
Gas fitters from other states apply as new applicants and sit for the DC exam.
City and county rules in District of Columbia
Because DC is one jurisdiction, the District takes care of both licensing and local rules.
The District
- Licenses for Journey, Master and Contractor Gas Pipe Fitters
- Exam pre-approval, through the Board of Industrial Trades
- Exams, given by PSI
Local rules
- District agencies handle permits and inspections
- DC has no separate city or county gas license
Who oversees gas pipe fitters in the District of Columbia
Licensing authority
DC Department of Licensing and Consumer Protection
202-671-4500
What the board does
- Grants Journey, Master and Contractor Gas Pipe Fitter licenses
- Works with the Board of Industrial Trades, which pre-approves exam candidates
- Looks over applications and experience
District of Columbia gas fitter license: common questions
How many hours does a DC journeyman gas fitter license take?
You need 8,000 hours over 4 or more years as an apprentice plumber or gasfitter. You can also qualify with a mechanical engineering degree and 2 years of verified experience.
How do you become a master gas pipe fitter in DC?
First log 4 or more years holding a Journeyman Gas Pipe Fitter license. After that, the 75-question Master exam is the last step.
Is the DC gas fitter license exam open book?
Yes, you can use books on both exams. They have to be bound, but tabs and highlighting are fine.
Who runs the DC gas fitter license exam?
PSI does. Once you’re pre-approved, book online at psiexams.com or call 855-557-0616.
Do DC gas fitters need continuing education?
No. DC has no CE requirement for Journeyman or Master Gas Fitters.
Does DC accept an out-of-state gas fitter license?
No. Gas fitters licensed elsewhere start over as new applicants and take the exam, since the District has no reciprocity agreements.
Where this information comes from
- DC Department of Licensing and Consumer Protection, Professional Licensing
- PSI, Candidate exam scheduling
- DC Board of Industrial Trades, Gas Pipe Fitter licensing
- DLCP Board of Industrial Trades, fee schedule
- PSI Washington D.C. Contractor/Trades Candidate Information Bulletin
Last updated October 27, 2026. Spot something out of date? Tell us.
Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the DC Department of Licensing and Consumer Protection.
