
Home Licenses Roofing Contractor License Alabama
Roofing Contractor · Commercial & Residential
Alabama Roofing Contractor License: Requirements, Exam and How to Apply
There are two ways to get licensed for roofing in Alabama. The General Contractors board offers the Roofing & Sheet Metal classification, and the Home Builders Licensing Board offers a Residential Roofing license with no exam. Here’s how each one works.
Last updated October 27, 2026 from Alabama Licensing Board for General Contractors and Alabama Home Builders Licensing Board requirements
Exam time
4.5 hrs
Roofing & Sheet Metal (150 min) and Business & Law (120 min)
Time to get license
Varies
For residential, you first need 1 year as a locally licensed contractor
Continuing ed
Not required
Neither license needs CE to renew
Do you need an Alabama roofing contractor license?
For most roofing work, yes. If a residential roofing job is over $2,500, you need the Home Builders Licensing Board’s Residential Roofing license. Roofing and sheet metal work under the General Contractors board calls for the Roofing & Sheet Metal classification, which carries a bid limit.
You need the license when
- The job is more than $2,500 and you install or repair the roof surface that seals, waterproofs or weatherproofs a home
- Under the General Contractors board, you put on, fix or replace commercial roofs
- As a contractor, you make or install roofing sheet metal, flashing, gutters or downspouts
- You give estimates or bid on roofing and sheet metal jobs
Exceptions
- If a home roofing job comes in at $2,500 or less, you don’t need the Residential Roofing license for it
- We couldn’t confirm any other exemptions, so check with the board before bidding
What happens if you work unlicensed
The sources we checked don’t name specific penalties. Generally, Alabama’s licensing boards can refuse, suspend or discipline a license and take action against unlicensed contractors. Get your license before you bid.
How to get an Alabama roofing contractor license in 6 steps
- Choose your license First step
If you only do residential roofing, the Home Builders Licensing Board’s Residential Roofing license may fit. For commercial roofing or sheet metal, you need the General Contractors board’s Roofing & Sheet Metal classification. - Residential route: meet the experience rule 1 year
Before applying, you must hold or have held a business or occupational contractor license from an Alabama city, county or township for 1 year or longer. - Residential route: buy your bond Before applying
Buy a $10,000 license/permit bond with the Board named as obligee. It runs out December 31 and gets renewed with your license each year. - Commercial route: set up the business Before applying
File with the Alabama Secretary of State, name a Qualifying Party, and get a current financial statement and general liability coverage in place. - Commercial route: pass both PSI exams Exam day
Once you’re pre-approved, book at candidate.psiexams.com or by calling 855-257-1619. Both Business & Law and the Roofing & Sheet Metal exam take 70% to pass. - Apply with your board Last step
Send your application to the Home Builders Licensing Board (hblb.alabama.gov) or to the General Contractors board (genconbd.alabama.gov).
Alabama roofing contractor application checklist
Everything for Alabama on one page
- Choose Residential Roofing or Roofing & Sheet Metal
- Residential: 1 year as a local contractor license holder
- Residential: a $10,000 bond with the Board as obligee
- Commercial: a Qualifying Party and Secretary of State registration
- Commercial: an up-to-date financial statement and general liability coverage
- Commercial: 70% on Business & Law and the trade exam
Alabama roofing contractor license classes
The work you do decides the license. The General Contractors board covers commercial and general roofing, and the Home Builders Licensing Board covers residential roofing jobs over $2,500.
RSM Commercial & residential
Roofing & Sheet Metal Contractor
Covers installing, repairing or replacing roofs on residential or commercial buildings of any kind, along with roofing sheet metal, flashing, gutters and downspouts. Inspections and estimates are included.
| Exam | Roofing & Sheet Metal + B&L |
| Limit | Set by bid limit |
RR No exam
Residential Roofing
For jobs over $2,500: installing or repairing the roof covering that keeps a home sealed, waterproof or weatherproof.
| Exam | None |
| Limit | Not stated |
Requirements for each Alabama roofing contractor class
Each roofing license comes from its own board, and the requirements differ a lot. You skip the exam for the residential license, but you need a bond and a year of holding a local contractor license.
| Requirement | Roofing & Sheet Metal | Residential Roofing |
|---|---|---|
| Which board | General Contractors board | Home Builders Licensing Board |
| Experience | Board reviews your education and work history | 1 year as the holder of a local contractor license |
| Exams | Trade and Business & Law, 70% on each | None |
| Bond | Not stated | $10,000, renewed each December 31 |
| Insurance | General liability | Not stated |
| Financial statement | Must be current | Not stated |
| Business setup | Qualifying Party plus Secretary of State registration | Not stated |
| Continuing education | Not required | Not required |
The Alabama roofing contractor exam
For the Roofing & Sheet Metal classification, you pass two exams, both open book: Alabama Business & Law and the trade exam. There’s no exam for the Residential Roofing license.
Format
Open book
Questions
60 + 50
Passing score
70%
Exam vendor
PSI
Scoring and topics
- Roofing & Sheet Metal: 60 questions in 150 minutes
- Business & Law: 50 questions in 120 minutes
- Trade subjects: plan reading and estimating, prepping surfaces, low and steep slope roofing (BUR and waterproofing included), roof components and safety
- For the trade exam, references include the 2021 IBC, OSHA 1926, Roofing Construction & Estimating and the NRCA manuals on membranes and steep-slope roofing
- Business & Law draws on the NASCLA Alabama contractors guide, 3rd ed. Read the full list in the PSI candidate bulletin before you study.
Retakes
- You pay $96 for each PSI attempt, and you can retest as many times as you need during your 1-year eligibility
- You need PSI pre-approval to schedule
- You’ll find test centers in the larger cities around Alabama
- Before you retest, read the current rules in the PSI candidate bulletin so nothing surprises you
Books and codes for this exam (open book)
The Alabama Roofing and Sheet Metal Contractor exam and the Business and Law exam are both open book. You can tab and highlight the approved references below and bring them into the test.
| Reference | Edition | How it’s used |
|---|---|---|
| OSHA 29 CFR 1926: Construction Industry Regulations — Roofing and Sheet Metal exam | Not stated | Allowed in exam |
| International Building Code (IBC) — Roofing and Sheet Metal exam | 2021 | Allowed in exam |
| Roofing Construction & Estimating, Revised — Roofing and Sheet Metal exam | Not stated | Allowed in exam |
| NRCA Roofing Manual: Steep-Slope Roof Systems — Roofing and Sheet Metal exam | Not stated | Allowed in exam |
| NRCA Roofing Manual: Membrane Roofing Systems — Roofing and Sheet Metal exam | Not stated | Allowed in exam |
| NASCLA Contractor’s Guide to Business, Law and Project Management (Alabama General Contractors) — Business and Law exam | 3rd edition | Allowed in exam |
Residential roofing licenses fall under the Home Builders Licensing Board and don’t require an exam.
Prep for the Alabama roofing contractor exam
Our exam prep course, Total Prep and complete bundle for the Alabama roofing contractor exam. Prices are coming soon.
Books for this exam
-

2021 International Building Code
Price coming soon -

NASCLA Contractors Guide to Business, Law and Project Management, Alabama General Contractors, 3rd edition
Price coming soon -

Roofing Construction & Estimating Revised, Revised edition
Price coming soon -

The NRCA Roofing Manual: Membrane Roof Systems
Price coming soon -

The NRCA Roofing Manual: Steep-slope Roof Systems
Price coming soon -

Book Tabs
Price coming soon
Renewing your Alabama roofing contractor license
You don’t need continuing education to renew either roofing license. For residential roofers, the $10,000 bond runs out December 31 and has to be renewed each year with the license, which costs $150 a year. If your renewal gets to the board on or after December 1, add a $50 late fee. Commercial Roofing & Sheet Metal licenses cost $200 a year to renew.
Renewal cycle
Each year (residential)
CE hours
Not required
Renewal fee
$150 residential; $200 commercial
Late penalty
$50 (residential)
Licensed in another state?
The sources we checked don’t list reciprocity for roofing licenses in Alabama.
No reciprocity
We couldn’t find any for roofing. Expect to apply as a new applicant and meet Alabama’s requirements, and if you’re licensed elsewhere, ask the board.
City and county rules in Alabama
The state issues roofing licenses, but if you take the residential route, you first need a local contractor license from your city, county or township.
The state handles
- The Roofing & Sheet Metal classification and its bid limits (General Contractors board)
- Residential Roofing licensing and bonds (Home Builders Licensing Board)
- Exams, given by PSI
- Renewing licenses
Cities & counties handle
- Occupational or business contractor licenses
- Permits and inspections
Alabama’s roofing licensing boards
Licensing authority
Alabama Licensing Board for General Contractors and Alabama Home Builders Licensing Board
General Contractors board: 334-272-5030 · genconbd.alabama.gov
Home Builders Licensing Board: 334-242-2230 · hblb.alabama.gov
What the board does
- Issue roofing licenses and handle renewals
- Define the Roofing & Sheet Metal classification and its bid limits
- Make residential roofers carry the $10,000 bond
- Look over your experience, insurance, financials and exam results
Alabama roofing contractor license: common questions
Do you need a license for residential roofing in Alabama?
You do if the job is over $2,500. The license you need is the Alabama Home Builders Licensing Board’s Residential Roofing license.
Does the Alabama residential roofing license have an exam?
No. What you need instead is a $10,000 license/permit bond and 1 year or more holding an Alabama city, county or township contractor license.
Which exams does the Alabama Roofing & Sheet Metal license require?
You take two and need 70% on each: Alabama Business & Law (50 questions in 120 minutes) and the Roofing & Sheet Metal trade exam (60 questions in 150 minutes).
Can you use books on the Alabama roofing exams?
Yes. The approved references in the PSI candidate bulletin are allowed in the room.
Who gives the Alabama roofing license exam?
PSI does. After you’re pre-approved, book online or call 855-257-1619.
Do Alabama roofing contractors need CE?
No. You can renew either roofing license without CE.
How long does the Alabama residential roofing bond last?
It runs through December 31 of the current license year, and you renew it each year along with your license.
Where this information comes from
- Alabama Licensing Board for General Contractors
- Alabama Home Builders Licensing Board
- PSI, Alabama Candidate Information Bulletin
- PSI exam scheduling
- Alabama Licensing Board for General Contractors, How to Apply for a License
- Alabama Licensing Board for General Contractors, Prime Contractor application (PDF)
- Alabama Licensing Board for General Contractors, 2026 Prime Contractor renewal (PDF)
- Alabama Administrative Code Chapter 230-X-1, Licensing Board for General Contractors
- Alabama Administrative Code Rule 465-X-4-.04, Home Builders Licensure Board fees
Last updated October 27, 2026. Spot something out of date? Tell us.
Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Alabama Licensing Board for General Contractors or the Alabama Home Builders Licensing Board.