
Home Licenses Gas Fitter License Alabama
Gas Fitter License · Journeyman & Master
Alabama Gas Fitter License: Requirements, Exam and How to Apply
The Alabama Plumbers and Gas Fitters Examining Board issues gas fitter licenses at two levels: Journeyman and Master. Learn what experience counts, which exams you take, how to apply and what keeps your license active.
Last updated October 27, 2026 from Alabama Plumbers and Gas Fitters Examining Board requirements
Exam time
2 hrs
For Journeyman; Master runs 3 hrs, with 2 hrs more for Business & Law
Time to get license
~2–3 yrs
Journeyman takes 2 yrs of apprentice work; Master adds 1 yr working as a Journeyman
Continuing ed
4 hrs
Due each year by December 31
Do you need an Alabama gas fitter license?
Yes. If you install, repair or replace gas work in Alabama, you need a gas fitter license. If you contract for or supervise gas work, you need a Master license. A Journeyman has to work under a Master Gas Fitter.
You need the license when
- Your own hands are on the gas work: installation, repair or replacement (Journeyman)
- You take on, or offer, gas work under contract (Master)
- You superintend gas system installs, upkeep or repairs (Master)
Exceptions
- Registered apprentices can work toward a license under licensed supervision
- We couldn’t confirm any other exemptions. Read Code of Alabama Title 34, Chapter 37 before counting on one
What happens if you work unlicensed
Code of Alabama Title 34, Chapter 37 and the Board’s rules in Administrative Code Chapter 720 cover gas fitting in the state. Because the Board can deny, suspend or revoke a license and pursue unlicensed gas work, get your license before you do paid work on any gas line.
How to get an Alabama gas fitter license in 6 steps
- Build your experience ~2 years
Spend 2 years working as an apprentice, or complete a Board-approved apprenticeship with registered apprentice time that totals 2 years. Master candidates also need 1 year as a licensed Journeyman. - Apply to the Board for the exam Before testing
Send the Alabama Plumbers and Gas Fitters Examining Board your finished application and supporting paperwork. You’ll find the candidate bulletin inside the exam packet from the Board. - Get pre-approval Board review
Scheduling opens only after the Board approves you. - Book with Prov After approval
Reach Prov at 866-720-PROV. There are test centers in larger cities across Alabama. - Pass the exams Exam day
Journeyman candidates sit for a single 50-question exam (2 hours, pass at 70%). Master candidates take the 75-question Master exam (3 hours) and a 40-question Business & Law exam (2 hours). Every one is open book. - Get your license From the Board
When you pass, the Board issues your gas fitter license for Alabama.
Alabama gas fitter application checklist
Everything for Alabama on one page
- 2 years of apprentice work or a Board-approved apprenticeship
- For Master: 1 year working as a Journeyman
- Finished exam application with supporting documents
- Pre-approval from the Board
- Your Prov exam, booked through 866-720-PROV
- For Master: a passing Business & Law score
Alabama gas fitter license classes
One level covers hands-on gas work, and the other covers contracting and supervising. Most fitters begin as a Journeyman and later step up to Master.
JRY Most common
Journeyman Gas Fitter
Handles the hands-on install, repair and replacement of gas work while a Master Gas Fitter supervises.
| Exam | Journeyman exam |
| Limit | Works under a Master |
MST Contracting
Master Gas Fitter
Superintends or takes contracts for gas system and gas work installs, upkeep and repairs.
| Exam | Master + Business & Law |
| Limit | Can contract |
Requirements for each Alabama gas fitter class
Each level builds on the last. You earn Journeyman as an apprentice, and you need a year working as a Journeyman before you can test for Master.
| Requirement | Journeyman | Master |
|---|---|---|
| Experience | Either 2 years of apprentice work, or a Board-approved apprenticeship combined with registered apprentice time adding up to 2 years | 1 year working as a Journeyman Gas Fitter |
| Trade exam | Journeyman Gas Fitter exam | Master Gas Fitter exam |
| Business & Law exam | Not required | Required |
| Pre-approval from the Board | Required before scheduling | Required before scheduling |
| Supervision | Works under a Master | May contract and supervise |
The Alabama gas fitter exam
Every Alabama gas fitter exam is open book. Bring the approved references named in the Board’s candidate bulletin; you can tab and highlight them and use them while you test.
Format
Open book
Questions
50 (JRY) / 75 + 40 (Master)
Passing score
70%
Exam vendor
Prov
Scoring and topics
- Journeyman: 50 questions in 120 minutes; 70% passes
- Master: 75 questions in 180 minutes, with laws and rules added
- Business & Law (Master candidates only): 40 questions over 2 hours
- Trade subjects: theory and fundamentals, materials, appliances, sizing pipe, venting, combustion air, special requirements and plan reading
- For the trade exam, references include the 2021 International Fuel Gas Code. Business & Law draws on the NASCLA Contractors Guide (Basic Edition), Administrative Code Chapter 720 and Code of Alabama Title 34, Chapter 37
Retakes
- You need Board pre-approval before you can schedule anything
- Waiting period before a retake: we couldn’t confirm it
- Fees go to the Board: $110 Journeyman, $160 Master, $100 Business & Law
- Call Prov at 866-720-PROV to book or change your exam
Books and codes for this exam (open book)
The Alabama Journeyman and Master Gas Fitter exams and the Business and Law exam are open book, and you can tab and highlight the approved references and use them during the test. Master Gas Fitter applicants also take the Business and Law exam, which has its own references.
| Reference | Edition | How it’s used |
|---|---|---|
| International Plumbing Code (IPC) — Journeyman and Master exams | 2021 | Allowed in exam |
| International Fuel Gas Code (IFGC) — Journeyman and Master exams | 2021 | Allowed in exam |
| Modern Plumbing — Journeyman and Master exams | 9th edition | Allowed in exam |
| Mathematics for Plumbers and Pipefitters — Journeyman and Master exams | 8th edition | Allowed in exam |
| Alabama Administrative Code Chapter 720: Rules of the Alabama Plumbers and Gas Fitters Examining Board — all exams (print) | Not stated | Allowed in exam |
| Code of Alabama, Title 34, Chapter 37: Plumbers and Gas Fitters — Business and Law exam (print) | 2022 | Allowed in exam |
| NASCLA Contractor’s Guide to Business, Law and Project Management — Business and Law exam | Basic Edition | Allowed in exam |
| Alabama Electrical Contractors Supplement to the Contractor’s Guide — Business and Law exam | Not stated | Allowed in exam |
The Code of Alabama and Administrative Code chapters are free to download from the Plumbers and Gas Fitters Examining Board, so candidates print them and bring them in.
Prep for the Alabama gas fitter exam
Our exam prep course, Total Prep and complete bundle for the Alabama gas fitter exam. Prices are coming soon.
Books for this exam
-

2021 International Fuel Gas Code
Price coming soon -

2021 International Plumbing Code
Price coming soon -

Mathematics for Plumbers and Pipefitters, 8th edition
Price coming soon -

Modern Plumbing, 9th edition
Price coming soon -

NASCLA Contractors Guide to Business, Law and Project Management, Basic 14th Edition, Basic Edition
Price coming soon -

Book Tabs
Price coming soon
Renewing your Alabama gas fitter license
Each year, licensed gas fitters need 4 hours of continuing education finished by December 31. Renewing a certificate costs $75 a year for Journeyman or $175 for Master. Renew late and you pay a penalty that matches the renewal fee.
Renewal cycle
Annual
CE hours
4 per year
Renewal fee
$75 Journeyman; $175 Master
Late penalty
$75 Journeyman; $175 Master
Alabama gas fitter CE
Hours, deadlines, required topics and the renewal steps, in one guide.
Licensed in another state?
Alabama doesn’t have reciprocity agreements for gas fitter licenses.
No reciprocity
If you’re licensed in another state, you’ll apply as a new applicant, show you meet Alabama’s experience rules and pass the state’s exams.
City and county rules in Alabama
The state Board issues your gas fitter license. Permits and inspections on each job are still up to local building departments.
The state handles
- Licensing for Journeyman and Master gas fitters
- Approving you for the exam
- Rules for continuing education
- Discipline under Title 34, Chapter 37
Cities & counties handle
- Gas permits, when needed
- Inspecting gas piping and appliance installs
- Local business licenses
Alabama’s gas fitter licensing board
What the board does
- Licenses Journeyman and Master gas fitters
- Reviews exam applications and grants pre-approval
- Sets continuing education rules in Administrative Code Chapter 720
- Enforces the law for plumbers and gas fitters
Alabama gas fitter license: common questions
How long does it take to get an Alabama gas fitter license?
Plan on about 2 years of apprentice work for Journeyman. For Master, add 1 more year working as a Journeyman.
Can you use books on the Alabama gas fitter exam?
Yes. The approved references in the Board’s candidate bulletin can be tabbed, highlighted and used during the exam.
How many questions are on the Alabama gas fitter exam?
Journeyman candidates answer 50 questions in 120 minutes and need 70% to pass. Master candidates get 75 questions in 180 minutes and a separate 40-question Business & Law exam.
Does an Alabama gas fitter license require Business and Law?
Only if you’re going for the Master Gas Fitter license.
Who gives the Alabama gas fitter exam?
Prov does. Get pre-approved by the Board, then book by calling 866-720-PROV.
How much CE do Alabama gas fitters need?
You need 4 hours each year, done by December 31.
Will Alabama accept a gas fitter license from another state?
No, it won’t. Alabama has no reciprocity deals for gas fitters, which means you go through the full process as a new applicant.
Where this information comes from
- Alabama Plumbers and Gas Fitters Examining Board
- Board exam application packet and candidate bulletin (PDF, Jan 2026)
- Code of Alabama Title 34, Chapter 37 and Administrative Code Chapter 720
- Alabama Administrative Code Chapter 720
- Prov, Alabama gas fitter exam scheduling (866-720-PROV)
- Alabama Plumbers and Gas Fitters Examining Board, administrative rules (PDF, Jan 2026)
- Alabama Plumbers and Gas Fitters Examining Board, journeyman exam application (PDF)
- Alabama Plumbers and Gas Fitters Examining Board, master exam application (PDF)
Last updated October 27, 2026. Spot something out of date? Tell us.
Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Alabama Plumbers and Gas Fitters Examining Board.