Alabama HVAC License: Requirements, Exam and How to Apply, Alabama HVAC License, Alabama, Certified Heating and Air Conditioning Contractor, Certified Refrigeration Contractor, Alabama Board of Heating, Air Conditioning & Refrigeration Contractors, how to get a Alabama HVAC License, Alabama HVAC License requirements, Alabama HVAC License exam, Alabama licensing board, Alabama contractor license, license application steps, exam reference books, Heating & Air Conditioning, Refrigeration, Experience or education, An approved HVAC/R curriculum, Application

Home Licenses HVAC License Alabama

HVAC License · HVAC & Refrigeration

Alabama HVAC License: Requirements, Exam and How to Apply

This page walks you through qualifying for, testing for and keeping an Alabama Certified Heating and Air Conditioning or Refrigeration Contractor certification.

Last updated October 27, 2026 from Alabama Board of Heating, Air Conditioning & Refrigeration Contractors requirements

Exam time

5 hrs

For the Heating & Air Conditioning exam; Refrigeration takes 4 hrs

Time to get license

~2 yrs

Either 3,000 hours of coursework or experience, or 2 years as a registered apprentice

Continuing ed

4 hrs

Due every renewal

Do you need an Alabama HVAC license?

You do if you plan to run a heating, air conditioning or commercial refrigeration contracting business in Alabama. Contractors are certified by the Alabama Board of Heating, Air Conditioning & Refrigeration Contractors (HACR). Your certification sets whether you can take on HVAC work, refrigeration work or both.

You need the license when

  • Heating and air conditioning systems are your contract work, whether that’s design, install, upkeep, service, repairs or alterations
  • Some of your work is gas piping tied into heating, cooling, refrigeration, ventilation or process heating and cooling systems
  • You put in or service commercial refrigeration like walk-in and reach-in coolers or commercial fridges and freezers
  • You want your own business-level certification rather than working under another contractor’s

Exceptions

  • Apprentices registered in the Board’s program while they work toward certification
  • Reciprocity may cover you at the contractor level only, if you already hold a Kentucky, Maryland or North Carolina license

What happens if you work unlicensed

We couldn’t confirm specific penalty amounts. Generally, the HACR Board can refuse, suspend or revoke a certification and act against anyone contracting without one. Get certified before you bid on HVAC or refrigeration jobs.

How to get an Alabama HVAC license in 6 steps

  1. Choose a certification First step
    Figure out whether you need Heating and Air Conditioning, Refrigeration or both. Each one has a separate exam.
  2. Qualify through experience or education ~2 years
    You can qualify three ways: graduate from an approved HVAC/R curriculum, finish 3,000 hours of coursework or experience as defined by the Board, or stay registered as a Board apprentice for 2 or more calendar years.
  3. Ask the HACR Board for exam approval Before testing
    Send in a full application, signed and notarized, with all the supporting documents it lists. Scheduling opens only after the Board approves you.
  4. Pass the Prov exam Exam day
    Book with Prov by calling 866-720-7768. Both exams are open book, and test centers are in the larger cities across Alabama.
  5. File your bond and business paperwork Before going active
    To be active, you need a $20,000 performance bond and your business documentation.
  6. Get certified After approval
    When the Board signs off on everything, you’re cleared to contract under your Alabama HVAC or Refrigeration certification.

Alabama HVAC application checklist

Everything for Alabama on one page

  • 3,000 hours, an approved HVAC/R program, or 2+ years as a registered apprentice
  • Notarized, signed application and supporting documents
  • Approval from the Board to take the exam
  • A passing HAC or Refrigeration exam score
  • A $20,000 performance bond
  • Your business paperwork

Alabama HVAC license classes

There are two contractor certifications in Alabama. Choose the one that fits your work, or get both if you handle heating, cooling and commercial refrigeration.

HAC Most common

Certified Heating and Air Conditioning Contractor

Covers designing, installing, servicing and repairing heating, cooling, refrigeration, ventilation and process heating or cooling systems, gas piping included.

ExamHeating & Air Conditioning
LimitNot stated

REF Commercial refrigeration

Certified Refrigeration Contractor

Covers designing, installing, servicing and repairing commercial refrigeration, such as walk-in and reach-in coolers and commercial fridges and freezers.

ExamRefrigeration
LimitNot stated

Requirements for each Alabama HVAC class

You qualify for either certification the same ways. Only the exam is different.

RequirementHeating & Air ConditioningRefrigeration
Experience or educationAn approved HVAC/R curriculum, 3,000 hours of coursework or experience, or 2+ years registered with the Board as an apprenticeAn approved HVAC/R curriculum, 3,000 hours of coursework or experience, or 2+ years registered with the Board as an apprentice
ApplicationNotarized and signed, with supporting documentsNotarized and signed, with supporting documents
ExamOpen-book HAC exam with 110 questionsOpen-book Refrigeration exam with 90 questions
Performance bond$20,000$20,000
Business paperworkNeeded to be activeNeeded to be active
Age requirementNot statedNot stated

The Alabama HVAC exam

Depending on your work, you’ll sit for the Heating and Air Conditioning exam, the Refrigeration exam or both. Each is open book and mixes trade knowledge with business and law, so it pays to know your references well.

Format

Open book

Questions

110 (HAC) / 90 (Refrigeration)

Passing score

70% (HAC)

Exam vendor

Prov

Scoring and topics

  • HAC: 110 questions over 5 hours; pass at 70%
  • Refrigeration: 90 questions over 4 hours; we couldn’t confirm the passing score
  • HAC covers systems and sizing, piping, equipment, maintenance, reading plans, estimating, and lien and licensing law
  • Refrigeration covers systems and sizing, piping, troubleshooting and maintenance, reading plans, contracts and managing projects
  • You can use the Board’s Laws, Rules and Regulations on either exam; see the Prov bulletin for every allowed reference

Retakes

  • We couldn’t confirm the retake rules
  • Read the latest Prov candidate information bulletin before booking
  • You need Board pre-approval to schedule
  • Scheduling questions go to Prov at 866-720-7768

Books and codes for this exam (open book)

Both Alabama exams, Heating and Air Conditioning (HAC) and Refrigeration, are open book, and you can tab and highlight the approved references and use them during the test. Some books apply to one exam only, as marked.

ReferenceEditionHow it’s used
NASCLA Contractor’s Guide to Business, Law and Project Management — HAC and Refrigeration examsBasic EditionAllowed in exam
International Residential Code (IRC) — HAC and Refrigeration exams2021Allowed in exam
NFPA 70: National Electrical Code (NEC) — HAC and Refrigeration exams2020Allowed in exam
Refrigeration & Air Conditioning Technology — HAC and Refrigeration examsNot statedAllowed in exam
Laws, Rules and Regulations of the Alabama Board of Heating, Air Conditioning & Refrigeration Contractors — HAC and Refrigeration exams (print)Not statedAllowed in exam
ACCA Manual D: Residential Duct Systems — HAC exam3rd editionAllowed in exam
ACCA Manual J: Residential Load Calculation, Abridged Edition — HAC exam8th edition, abridgedAllowed in exam
International Mechanical Code (IMC) — Refrigeration exam2021Allowed in exam
OSHA 29 CFR 1926 Construction Regulations — Refrigeration examNot statedAllowed in exam

The board’s Laws, Rules and Regulations are a free download that candidates print and bring into either exam.

Prep for the Alabama HVAC exam

Our exam prep course, Total Prep and complete bundle for the Alabama HVAC exam. Prices are coming soon.

Books for this exam

Renewing your Alabama HVAC license

Each renewal calls for 4 hours of continuing education. You renew active certification every year by December 31 for $220 (or $110 if inactive), and a $250 late fee applies after that date. Starting with the 2025 renewal, you’ve also had to show proof of the $20,000 performance bond.

Renewal cycle

Annual, by December 31

CE hours

4

Renewal fee

$220 active; $110 inactive

Late penalty

$250

Alabama HVAC CE

Hours, deadlines, required topics and the renewal steps, in one guide.

Licensed in another state?

Alabama has reciprocity with three states, and it covers only the contractor level.

Kentucky: reciprocity

Applies at the contractor level. Ask the HACR Board for the latest application steps.

Maryland: reciprocity

Covers contractors only. Check with the HACR Board on how to apply now.

North Carolina: reciprocity

Contractor level only. Ask the HACR Board for the latest application steps.

Every other state: no agreement

You’ll apply as a new applicant, meet the experience requirements and pass Alabama’s exam.

City and county rules in Alabama

The state issues your certification, but each job still goes through the local permit office.

The state handles

  • Certifying HVAC and Refrigeration contractors
  • Approving you to test, with exams through Prov
  • Registering apprentices
  • Renewals and CE

Cities & counties handle

  • Mechanical permits and inspections
  • Local business licenses
  • Adopting and enforcing local codes

Alabama’s HVAC licensing board

Licensing authority

Alabama Board of Heating, Air Conditioning & Refrigeration Contractors

334-242-5550

hacr.alabama.gov/applicants

What the board does

  • Certifies contractors in Heating and Air Conditioning and in Refrigeration
  • Approves who can take the state exams
  • Handles apprentice registration
  • Sets the rules for bonds, renewals and continuing education

Alabama HVAC license: common questions

How long does it take to get an Alabama HVAC license?

For most people it’s about 2 years. You qualify with an approved HVAC/R program, 3,000 hours of coursework or experience, or 2 or more calendar years registered with the Board as an apprentice.

Can you use books on the Alabama HVAC exam?

Yes. You can bring references into both the Heating and Air Conditioning and the Refrigeration exams. On the HAC exam, you get 5 hours for 110 questions and need 70% to pass.

Who gives the Alabama HVAC license exam?

Prov does. Once the HACR Board approves you, call Prov at 866-720-7768 to book.

Is a bond required for an Alabama HVAC license?

It is. You need a $20,000 performance bond to hold an active license. The $20,000 amount has applied since October 1, 2024, and you’ve had to show proof of it since the 2025 renewal.

Will Alabama accept an HVAC license from another state?

Only at the contractor level, through reciprocity with Kentucky, Maryland and North Carolina. Anyone else applies as a new applicant.

How much CE does an Alabama HVAC license require?

You need 4 hours every time you renew.

How do Alabama’s HVAC and Refrigeration certifications differ?

Heating and Air Conditioning is for heating, cooling, ventilation and the gas piping that goes with them. Refrigeration is for commercial equipment such as walk-in and reach-in coolers and commercial freezers.

Where this information comes from

  1. Alabama HACR Board, Applicants
  2. Alabama HACR Board, Laws, Rules and Regulations (PDF)
  3. Prov, Alabama HACR Candidate Information Bulletin (Sept 2026)
  4. Alabama HACR Board, How to Get Licensed

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Alabama Board of Heating, Air Conditioning & Refrigeration Contractors.