Iowa Plumber Continuing Education: Hours, Deadline and How to Renew, Iowa Plumber Continuing Education, Iowa, Iowa Plumbing and Mechanical Systems Board, Iowa Plumber Continuing Education hours, Iowa Plumber Continuing Education renewal deadline, Iowa license renewal, online Iowa Plumber Continuing Education, required CE topics, CE reporting, Iowa occupational safety and health, Single license, Plumbing, Plumbing & mechanical licenses, License renewal fee, Apprentice, Late renewal fee, Reinstatement (lapsed more than one year), Depends on the provider

Home Continuing education Plumber Continuing Education Iowa

Plumber CE · Single & Multiple Licenses

Iowa Plumber Continuing Education: Hours, Deadline and How to Renew

How much CE you owe in Iowa depends on your licenses: 8 hours per three-year period with one license, or 16 if you hold plumbing and mechanical licenses. It’s due before the license expires on June 30.

Last updated October 28, 2026 from Iowa Plumbing and Mechanical Systems Board requirements

Hours per cycle

8 or 16 hrs

One license means 8 hours; plumbing plus mechanical licenses means 16

Cycle

3 years

Licenses run out every three years

Deadline

Jun 30, every 3 years

This license period closes June 30, 2029

Online allowed?

Yes, up to half

No less than half has to be in person

Iowa plumber CE at a glance

Iowa plumber renewal at a glance

Renewed withIowa Plumbing and Mechanical Systems Board
CE required?Yes
Hours per cycle8 hrs for one license, 16 hrs for plumbing + mechanical
Cycle3 years
Required topicsIowa occupational safety and health, plumbing code (and mechanical code if you hold a mechanical license), and hours in your discipline
Online allowed?Yes, up to half
DeadlineJune 30 every 3 years (the next is June 30, 2029)
Who reportsYou report hours when you renew; providers submit rosters
CarryoverNot stated
Grace period30 days (until July 31) with no late fee
Renewal fee$180 for journeypersons; $240 for masters
Last updatedOctober 28, 2026

Who has to complete Iowa plumber CE?

If you hold an Iowa plumbing license at the journeyperson or master level, whether active or inactive, you need CE to renew. How many hours depends on whether you have a single license or plumbing plus mechanical licenses. The state handles renewal through the Iowa Plumbing and Mechanical Systems Board.

CE applies to

  • Journeyperson and master plumbers holding a single license
  • Licensees holding plumbing plus mechanical licenses
  • Inactive master and journeyperson licensees

Exemptions

  • Medical gas piping installers are exempt from CE
  • The first renewal of a license issued with under one year remaining in the period
  • A journeyperson licensed by exam who keeps the renewal date from the apprentice license, at that first renewal
  • Honorable active military duty, plus other exemptions listed in the board’s rules

How many CE hours an Iowa plumber needs

With a single license, you need 8 hours every three years. With a plumbing license and one or more mechanical licenses, you need 16 hours. You can take as much as half online.

ClassTotalRequired topicsElectivesDelivery limits
Single license8 hrsIowa occupational safety and health, 2 hrs; plumbing code, 2 hrsPlumbing, 4 hrsNo more than half online
Plumbing & mechanical licenses16 hrsIowa occupational safety and health, 4 hrs; plumbing code, 2 hrs; mechanical code, 2 hrs8 hrs within your disciplinesNo more than half online

An hour means 50 minutes or more in a single sitting. Medical gas piping installers are exempt from CE.

Iowa plumber renewal deadline

Every Iowa plumbing and mechanical license shares one three-year period and expires on June 30 when it ends, whatever the issue date. This period started July 1, 2026 and ends June 30, 2029. A 30-day grace period through July 31 lets you finish CE and renew with no late fee.

Deadline ruleJune 30 every 3 years (every license expires at once)
Cycle3 years
Next deadlinesJune 30, 2029; June 30, 2032
Grace period30 days, until July 31, without a late fee
Late penalty$60 to renew August 1–31; $100 from September 1 until the next June 30; reinstatement once a year has passed
CE completion deadlineBy June 30 (CE is also covered by the 30-day grace period)

How to renew an Iowa plumber license

  1. Complete approved CE Before your deadline
    Finish board-approved CE: 8 hours with one license, or 16 with plumbing plus mechanical licenses. Include your Iowa occupational safety and health hours and code hours, and take at least half in person.
  2. Save your certificate Same day
    When you finish a course, save or print the certificate of completion.
  3. Report it at renewal At renewal
    Your renewal asks for your in-person and online hours. The board checks your certificates against rosters that approved instructors send in.
  4. Pay the renewal fee
    Renew online in the DIAL license portal and pay the Iowa Plumbing and Mechanical Systems Board. If you renew by July 31, there’s no late fee.
  5. Confirm your license status After renewal
    Search for your license and make sure the new expiration date appears.

How to tell an Iowa plumber course is approved

To count, Iowa plumber CE has to be approved for Iowa and cover the required areas: Iowa occupational health and safety, code hours, and hours specific to your trade. The board pre-approves both instructors and courses, and a course approval is good for three years.

  • Before paying, make sure the course is approved for Iowa plumbing CE.
  • Find out which area it fills: health and safety, code, or trade specific.
  • Check that your total fits how many licenses you hold: 8 or 16 hours.

Before paying for a course, check the board’s approved provider list to make sure it counts.

How your hours get reported, and audits

When you renew, you list your total in-person and online hours. Certificates don’t go in with the renewal. The board verifies your hours using attendance rosters from approved instructors.

  • Hold onto each certificate. It should list the course number and name, the date, the topic and the hours.
  • Audits can happen at any time, and you get 30 days to provide proof.
  • The board has no way to replace a lost certificate, so reach out to the instructor or sponsor right away if one goes missing.
  • Within one license period, a course can only count once.

What Iowa plumber renewal costs

ItemFeePaid to
License renewal feeApprentice, inactive or specialty: $50; journeyperson: $180; master: $240; inactive master holding an active journeyperson license: $230; contractor: $250Iowa Plumbing and Mechanical Systems Board
Late renewal feeAugust 1–31: $60; September 1 through the next June 30: $100Iowa Plumbing and Mechanical Systems Board
Reinstatement (lapsed more than one year)The full license fee for every licenseIowa Plumbing and Mechanical Systems Board
CE courses (8 or 16 hours)Depends on the providerCE provider

Fees come from DIAL’s Plumbing & Mechanical Systems licensing period and fee page and from 481 IAC chapter 428, checked October 2026. If you hold more than one journeyperson, master or contractor license, those fees drop by 30%. Filing on paper costs another $25.

Late, expired or inactive licenses

Renew by July 31 and you won’t pay a late fee. Late fees kick in after that, and once a license has been lapsed over a year, you have to reinstate it.

Grace period

You get 30 days past June 30, until July 31, with no late fee, and you can keep working.

Late fees

In August it’s $60 and you can keep working. Starting September 1 it’s $100, and you can’t work until you renew.

Reinstatement

Once it’s been over a year, either retake the exam or make up CE for every missed period (8 hours if lapsed under 2 years, 16 for 2 to 6 years, 24 for 6 to 9, 32 for 9 to 12), then pay the full license fee.

Inactive license

If you hold an inactive master or journeyperson license, you still need CE every period. Renewing an inactive license costs $50.

Who handles Iowa plumber renewals

Renewal authority

Iowa Plumbing and Mechanical Systems Board

Department of Inspections, Appeals, & Licensing, 6200 Park Avenue, Suite 100, Des Moines, IA 50321

(866) 280-1521

Website

What the board does

  • Issues Iowa plumbing licenses and handles renewals
  • Decides CE hours and required topics
  • Approves CE courses and instructors

Not licensed yet?

Our Iowa plumber license guide covers who needs one, the classes, the exam and how to apply.

Iowa plumber CE: common questions

How many CE hours does an Iowa plumber need to renew?

With one license, it’s 8 hours every three years. With a plumbing license and one or more mechanical licenses, it’s 16 hours.

What CE topics are required for an Iowa plumber license?

If you hold one license, you need 4 trade-specific hours, 2 hours of plumbing code and 2 hours of Iowa occupational health and safety.

When is the Iowa plumber license renewal deadline?

Every license expires on June 30 when the three-year period ends. This period closes June 30, 2029, and renewing through July 31 won’t cost you a late fee.

Who reports CE hours for an Iowa plumber license?

It’s on you to enter your in-person and online hours at renewal. The board also gets rosters from approved instructors, so save every certificate in case you’re audited.

Can Iowa plumbers take CE online?

Yes, for as much as half of your required hours. The other half or more has to be in person.

Where this information comes from

  1. Iowa Plumbing and Mechanical Systems Board
  2. Iowa Occupational Safety and Health
  3. Iowa Plumbing & Mechanical Systems licensure (DIAL)
  4. Licensing period & fees
  5. PMSB continuing education & training
  6. Renew or update a license
  7. 481 IAC chapter 428, licensure fees
  8. 481 IAC chapter 432, continuing education
  9. Iowa Code section 105.20

Last updated October 28, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Iowa Plumbing and Mechanical Systems Board.