Iowa HVAC Continuing Education: Hours, Deadline and How to Renew, Iowa HVAC Continuing Education, Iowa, Iowa Plumbing and Mechanical Systems Board, Iowa HVAC Continuing Education hours, Iowa HVAC Continuing Education renewal deadline, Iowa license renewal, online Iowa HVAC Continuing Education, required CE topics, CE reporting, Discipline hours, Single license, As much as half online, Multiple mechanical licenses, Mechanical & plumbing licenses, License renewal fee, Late renewal fee, Reinstatement (lapsed over one year), CE provider, Linden Prep

Home Continuing education HVAC Continuing Education Iowa

HVAC CE · Single & Multiple Licenses

Iowa HVAC Continuing Education: Hours, Deadline and How to Renew

As an Iowa mechanical license holder, you take 8 CE hours every 3 years, or 14 to 16 hours if you hold multiple licenses. Finish them before your license expires on June 30.

Last updated October 28, 2026 from Iowa Plumbing and Mechanical Systems Board requirements

Hours per cycle

8 hrs

14 or 16 hrs if you hold multiple licenses

Cycle

3 years

Your license expires every three years

Deadline

Jun 30, once every 3 years

This license period ends June 30, 2029

Online allowed?

Yes, as much as half

Half or more has to be in person

Iowa HVAC CE at a glance

Your Iowa HVAC renewal at a glance

Renewed withIowa Plumbing and Mechanical Systems Board
CE required?Yes
Hours per cycle8 hrs (14 or 16 with multiple licenses)
Cycle3 years
Required topicsDiscipline hours, the mechanical code (and the plumbing code too if you’re a plumbing licensee), and Iowa occupational safety and health
Online allowed?Yes, as much as half
DeadlineJune 30, once every 3 years (next: June 30, 2029)
Who reportsYou report your hours when you renew; providers send in rosters
CarryoverNot stated
Grace period30 days (through July 31) with no late fee
Renewal fee$180 for journeyperson; $240 for master
Last updatedOctober 28, 2026

Who has to complete Iowa HVAC CE?

If you hold an Iowa mechanical license at the journeyperson or master level, whether it’s active or inactive, you need CE to renew. The state handles renewal through the Iowa Plumbing and Mechanical Systems Board, and the number of licenses you hold sets your hours.

CE applies to

  • Single mechanical license holders
  • Holders of multiple mechanical licenses
  • Holders of both mechanical and plumbing licenses

Exemptions

  • Medical gas piping installers have no CE requirement
  • The first renewal of a license issued with under one year left in the period
  • A journeyperson license you passed the exam for, on its first renewal, when it keeps your apprentice renewal date
  • Honorable active military duty, plus other exemptions listed in the board’s rules

How many CE hours an Iowa HVAC needs

With one mechanical license, you need 8 hours every 3 years. That goes up to 14 hours if you hold more than one mechanical license, and to 16 if you hold both mechanical and plumbing licenses. You can take as much as half of your hours online.

ClassTotalRequired topicsElectivesDelivery limits
Single license8 hrs2 hrs of Iowa occupational safety and health, 2 hrs of mechanical code4 hrs in your trade disciplineAs much as half online
Multiple mechanical licenses14 hrs4 hrs of Iowa occupational safety and health, 2 hrs of mechanical code8 hrs in your trade disciplinesAs much as half online
Mechanical & plumbing licenses16 hrs4 hrs of Iowa occupational safety and health, 2 hrs of mechanical code, 2 hrs of plumbing code8 hrs in your trade disciplinesAs much as half online

An hour means 50 minutes or more in a single sitting. Medical gas piping installers have no CE requirement.

Iowa HVAC renewal deadline

Every Iowa plumbing and mechanical license shares one three-year period and expires June 30 when it ends, whenever the license was issued. This period runs from July 1, 2026 to June 30, 2029. A 30-day grace period, through July 31, lets you finish CE and renew with no late fee.

Deadline ruleJune 30, once every 3 years (every license expires at the same time)
Cycle3 years
Next deadlinesJune 30, 2029; June 30, 2032
Grace period30 days, through July 31, and no late fee
Late penalty$60 to renew August 1–31; $100 from September 1 until the next June 30; reinstatement after one year
CE completion deadlineBy June 30 (CE also gets the 30-day grace period)

How to renew an Iowa HVAC license

  1. Complete approved CE Ahead of your deadline
    Finish 8, 14 or 16 board-approved hours, based on which licenses you hold. Half or more has to be in person.
  2. Save your certificate Same day
    Keep the certificate of completion from each course you finish.
  3. Make sure it’s reported When you renew
    On your renewal, you list your in-person and online hours. The board checks your certificates against rosters that approved instructors send in.
  4. Pay to renew
    Use the DIAL license portal to renew online and pay the Iowa Plumbing and Mechanical Systems Board. If you renew by July 31, you won’t owe a late fee.
  5. Verify your license After renewal
    Search for your license and check your new expiration date.

How to tell an Iowa HVAC course is approved

Your Iowa mechanical CE only counts if the state approved the course. Your hours have to cover the topics required for the number of licenses you hold, and online hours can’t be more than half. The board must approve both the instructor and the course in advance, and a course approval is good for three years.

  • Before you pay, check that the board has approved the course.
  • Make sure your hours include Iowa occupational health and safety, code topics and trade-specific topics.
  • Be sure half or more of your hours are taken in person, not online.

Before you pay for a course, check the board’s approved provider list to be sure it counts.

How your hours get reported, and audits

On your renewal, you list your total in-person and online hours, without attaching certificates. The board verifies your hours using attendance rosters that approved instructors send in.

  • Hold on to each certificate. It should list the course number and name, the date, the topic and the hours.
  • The board may audit your CE whenever it wants, and you get 30 days to send proof if you’re audited.
  • Lost certificates can’t be replaced by the board, so reach out to the instructor or sponsor as soon as you notice one is missing.
  • Within one license period, a course only counts once.

What Iowa HVAC renewal costs

ItemFeePaid to
License renewal feeContractor $250; master $240; inactive master with active journeyperson $230; journeyperson $180; apprentice, inactive or specialty $50Iowa Plumbing and Mechanical Systems Board
Late renewal fee$60 (August 1–31); $100 (September 1 until the next June 30)Iowa Plumbing and Mechanical Systems Board
Reinstatement (lapsed over one year)The full license fee for every licenseIowa Plumbing and Mechanical Systems Board
CE courses (8 to 16 hours)Varies by providerCE provider

Fees come from the DIAL Plumbing & Mechanical Systems page on licensing periods and fees and from 481 IAC chapter 428, checked October 2026. If you hold more than one journeyperson, master or contractor license, those fees drop by 30%, and filing on paper costs $25 more.

Late, expired or inactive licenses

You can renew without a late fee until July 31. Late fees start after that, and once a license has been lapsed over one year, you have to reinstate it.

Grace period

You get 30 days after June 30, through July 31, with no late fee, and you can keep working.

Late fees

In August it’s $60 and you can keep working. From September 1 on it’s $100, and you can’t work until you’ve renewed.

Reinstatement

Once it’s been over a year, you either retake the exam or make up CE for every period you missed (8 hours if lapsed under 2 years, 16 for 2 to 6 years, 24 for 6 to 9, 32 for 9 to 12), and then pay the full license fee.

Inactive license

If you hold an inactive master or journeyperson license, you still need CE every period. Renewing an inactive license costs $50.

Who handles Iowa HVAC renewals

Renewal authority

Iowa Plumbing and Mechanical Systems Board

Department of Inspections, Appeals, & Licensing, 6200 Park Avenue, Suite 100, Des Moines, IA 50321

(866) 280-1521

Website

What the board does

  • Issues Iowa mechanical licenses and renews them
  • Decides the CE hours and topics you need
  • Caps online CE at half of your required hours

Not licensed yet?

Our Iowa HVAC license guide covers who needs one, the classes, the exam and how to apply.

Iowa HVAC CE: common questions

How many continuing education hours does an Iowa mechanical license need?

Every 3 years you need 8 hours with one license, 14 with multiple mechanical licenses, and 16 with both mechanical and plumbing licenses.

Can Iowa mechanical license holders take CE online?

Yes, for as much as half of the hours you need. The other half or more has to be in person.

When is the Iowa mechanical license renewal deadline?

Every license expires June 30 when the three-year period ends. This period ends June 30, 2029, and you have until July 31 to renew with no late fee.

What CE topics does Iowa require for mechanical licenses?

With one license, you take 2 hours of Iowa occupational safety and health, 2 hours of mechanical code and 4 hours in your discipline. With multiple licenses, you take 4 hours of safety, the code hours for each trade and 8 hours in your disciplines.

Who reports my Iowa mechanical CE hours?

Approved instructors send rosters to the board, and you list your in-person and online hours on your renewal. Hang on to your certificates for audits.

Do extra Iowa mechanical CE hours carry over?

We couldn’t confirm that extra hours roll over, so count on taking new hours every renewal.

Where this information comes from

  1. Iowa Plumbing and Mechanical Systems Board, mechanical license renewal
  2. Iowa occupational health and safety requirements
  3. Iowa Plumbing & Mechanical Systems licensure (DIAL)
  4. Licensing period & fees
  5. PMSB continuing education & training
  6. Renew or update a license
  7. 481 IAC chapter 428, licensure fees
  8. 481 IAC chapter 432, continuing education
  9. Iowa Code section 105.20

Last updated October 28, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Iowa Plumbing and Mechanical Systems Board.