Iowa HVAC License: Requirements, Exam and How to Apply, Iowa HVAC License, Iowa, Journeyperson HVAC/Refrigeration, Master HVAC/Refrigeration, Journeyperson Mechanical, Master Mechanical, Journeyperson Sheet Metal, Iowa Plumbing and Mechanical Systems Board, how to get a Iowa HVAC License, Iowa HVAC License requirements, Iowa HVAC License exam, Iowa licensing board, Iowa contractor license, license application steps, exam reference books, Works under a master, We couldn’t confirm, Minimum age, Experience, A master license from elsewhere, Passing score

Home Licenses HVAC License Iowa

HVAC License · Journeyperson & Master

Iowa HVAC License: Requirements, Exam and How to Apply

In Iowa, HVAC work is licensed under three disciplines: HVAC/Refrigeration, Mechanical and Sheet Metal. This page shows you how to qualify as a journeyperson or master, pass the open-book exams and keep your license active.

Last updated October 27, 2026 from Iowa Plumbing and Mechanical Systems Board requirements

Exam time

2–4 hrs

Varies by level and discipline

Time to get license

~4 yrs

Journeyperson needs a DOL-registered apprenticeship; master takes +2 yrs

Continuing ed

Up to 16 hrs

Each renewal; for sheet metal, 8 hours every 3 years

Do you need an Iowa HVAC license?

Yes. You need an Iowa state license to design, install or repair HVAC, mechanical, refrigeration and sheet metal systems. A journeyperson works under a master, and a master plans and superintends the work.

You need the license when

  • Your work includes repairing or installing heating, air conditioning, ventilation or ducted systems
  • You handle refrigeration for preserving or processing food, along with the gas lines connected to it
  • You put in gas lines (natural, liquid propane or propane) that connect to an HVAC system
  • Your jobs include fume hood, pollution control or sheet metal duct systems
  • As a master, you superintend or plan HVAC, sheet metal or mechanical work

Exceptions

  • Apprentices supervised by a licensed journeyperson in their discipline
  • A sheet metal license doesn’t include gas lines, electrical or refrigeration; those need another license

What happens if you work unlicensed

We couldn’t confirm specific fines. Under Iowa Code chapter 105, the Board can discipline or deny licenses, and a journeyperson can’t knowingly supervise unlicensed people doing licensed work or work for an unlicensed contractor.

How to get an Iowa HVAC license in 6 steps

  1. Finish your apprenticeship ~4 years
    Put in 4 years in an apprenticeship registered with the U.S. Department of Labor. For sheet metal, it’s 42 months, or 4 years of experience.
  2. Get approved to test Before you test
    File an Exam Approval Application, on paper or online. After approval, you’ll receive scheduling directions.
  3. Book with Kirkwood Before exam day
    Schedule through Kirkwood Community College or by phone at 319-398-4482. Iowa has 15 testing sites.
  4. Pass the journeyperson test Exam day
    You can bring books to every exam. Sheet Metal passes at 70%; HVAC/R and Mechanical pass at 75%.
  5. Apply for the license Once you pass
    Mail the Board your notarized, signed application along with apprenticeship proof and records of any criminal convictions.
  6. Step up to master 2 years later
    Once you have a journeyperson license and 2 years of experience, you’ll pay the master-level fee and pass the master exam, which has 100 questions.

Iowa HVAC application checklist

Everything for the Iowa application on one page

  • Proof that you’re 18 or older
  • 4 years in a DOL-registered apprenticeship (sheet metal: 42 months / 4 years)
  • Exam Approval Application
  • A passing result from Kirkwood Community College
  • A notarized, signed license application
  • Records of any criminal convictions

Iowa HVAC license classes

First choose the discipline that fits your work, then choose the level. Gas is part of the HVAC/Refrigeration and Mechanical exams. We could only confirm a journeyperson level for sheet metal.

JRY HVAC/R Most common

Journeyperson HVAC/Refrigeration

Works under a master on HVAC, ducted systems and refrigeration for food preservation, gas lines included.

Exam75 questions, 3 hrs
LimitWorks under a master

MST HVAC/R Top tier

Master HVAC/Refrigeration

Superintends and plans the design, installation and repair of HVAC and refrigeration systems.

Exam100 questions, 4 hrs
LimitWe couldn’t confirm

JRY MECH Mechanical

Journeyperson Mechanical

Works under a master on mechanical systems, venting, ducts, fuel supply and combustion air.

Exam75 questions, 2 hrs
LimitWorks under a master

MST MECH Top tier

Master Mechanical

Superintends and plans the design, installation and repair of mechanical systems.

Exam100 questions, 4 hrs
LimitWe couldn’t confirm

JRY SM Duct work

Journeyperson Sheet Metal

Fume hood, pollution control and HVAC duct systems. Gas lines, electrical and refrigeration aren’t included.

Exam75 questions, 2 hrs
LimitWorks under a master

Requirements for each Iowa HVAC class

Across disciplines, journeyperson requirements barely differ. To become a master, you need two years of experience on top of a journeyperson license, or a master license from another jurisdiction.

RequirementJourneyperson HVAC/R & MechanicalMaster HVAC/R & MechanicalJourneyperson Sheet Metal
Minimum age18We couldn’t confirm18
ExperienceA master license from elsewhere, or 4 years in a DOL-registered apprenticeshipA master license from elsewhere, or a journeyperson license + 2 years4 years of experience, or 42 months in a DOL-registered apprenticeship
Exam75 questions (Mechanical 2 hrs, HVAC/R 3 hrs)4 hrs, 100 questions2 hrs, 75 questions
Passing score75%We couldn’t confirm70%
Criminal historyYou disclose convictions, and the Board reviews feloniesWe couldn’t confirmYou disclose convictions, and the Board reviews felonies
ApplicationNotarized, signed applicationLicensing fee at the master levelExam Approval Application
Continuing educationUp to 16 hrs each renewalUp to 16 hrs each renewal8 hrs each 3 years

The Iowa HVAC exam

Kirkwood Community College gives a separate open-book exam for each discipline. Tab and highlight the approved references and use them while you test.

Format

Open book

Questions

75 or 100

Passing score

75% (sheet metal 70%)

Exam vendor

Kirkwood Community College

Scoring and content

  • Journeyperson HVAC/R with Gas: 75% passes; 3 hours for 75 questions
  • Journeyperson Mechanical with Gas: 75% passes; 2 hours for 75 questions
  • Journeyperson Sheet Metal: 70% passes; 2 hours for 75 questions
  • Master HVAC/R or Mechanical with Gas: 4 hours for 100 questions
  • You’ll use NFPA 54 (2024) and the 2024 IMC. Sheet Metal also uses the SMACNA Fibrous Glass Duct Construction Standards, and HVAC/R also uses Modern Refrigeration and Air Conditioning

If you need to retake

  • To retake, register again and pay the $119 exam fee
  • You can’t schedule without pre-approval
  • Iowa has 15 testing sites
  • Call Kirkwood to schedule: 319-398-4482

Books and codes for this exam (open book)

The Iowa HVAC/Refrigeration, Mechanical and Sheet Metal exams are open book. You can tab and highlight the approved references below and use them during the test, at both journeyperson and master level.

ReferenceEditionHow it’s used
International Mechanical Code (IMC) — HVAC/Refrigeration, Mechanical and Sheet Metal exams2024Allowed in exam
NFPA 54: National Fuel Gas Code — HVAC/Refrigeration, Mechanical and Sheet Metal exams2024Allowed in exam
Modern Refrigeration and Air Conditioning — HVAC/Refrigeration exams22nd editionAllowed in exam
SMACNA Fibrous Glass Duct Construction Standards — Sheet Metal examNot statedAllowed in exam

Prep for the Iowa HVAC exam

Our exam prep course, Total Prep and complete bundle for the Iowa HVAC exam. Prices are coming soon.

Books for this exam

Renewing your Iowa HVAC license

Expect as many as 16 hours of continuing education with each renewal. For journeyperson sheet metal licenses, it’s 8 hours every 3 years.

Renewal cycle

Every 3 years

CE hours

Up to 16 (sheet metal 8)

Renewal fee

Journeyperson $180 / master $240

Late penalty

$60 during August; $100 starting September 1

Iowa HVAC CE

Hours, deadlines, required topics and the renewal steps, in one guide.

Licensed in another state?

If you hold an HVAC/Refrigeration or Mechanical license from another state, it won’t transfer. The one exception Iowa has is for sheet metal, through an agreement with South Dakota.

South Dakota: sheet metal reciprocity

South Dakota sheet metal licenses are covered by a reciprocity agreement with Iowa. Ask the Board what you need to send.

A master license from another jurisdiction

If you hold a master license in the same discipline somewhere else, it can make you eligible for the Iowa journeyperson license or the Iowa master exam. Either way, you still have to pass the Iowa exam.

Every other state: no agreement

You’ll apply as a new applicant and satisfy Iowa’s exam and experience rules.

City and county rules in Iowa

The state issues your HVAC, sheet metal or mechanical license. Ask your city or county about permits for each job.

State handles

  • Licenses at the journeyperson and master levels for each discipline
  • Approving exam candidates (Kirkwood Community College gives the tests)
  • Renewal CE
  • Disciplining licensees under Iowa Code chapter 105

City and county handle

  • Job permits, where they’re required
  • Inspections, where they’re required

Who oversees HVAC contractors in Iowa

Licensing authority

Iowa Plumbing and Mechanical Systems Board

(515) 281-7689 · 515-725-6147

dial.iowa.gov/licenses/building/plumbing-mechanical

What the board does

  • Grants licenses at two levels (journeyperson and master) across three disciplines: Sheet Metal, Mechanical and HVAC/Refrigeration
  • Clears applicants to take the state exams
  • Reviews applicants who have felony convictions
  • Sets renewal CE rules

Iowa HVAC license: common questions

Do you need an HVAC license in Iowa?

Yes. At the journeyperson level, Iowa licenses Sheet Metal, Mechanical and HVAC/Refrigeration work. At the master level, it licenses Mechanical and HVAC/Refrigeration.

How long does it take to get an Iowa HVAC license?

Roughly 4 years. A journeyperson needs 4 years in an apprenticeship registered with the U.S. Department of Labor, and a master needs another 2 years holding a journeyperson license.

Is the Iowa HVAC license exam open book?

Yes, every exam is. For the journeyperson HVAC/R exam, you get 3 hours for 75 questions and need 75%.

Who gives the Iowa HVAC license exam?

Kirkwood Community College does, at 15 sites across Iowa. The Board has to pre-approve you before you schedule.

What’s the difference between Iowa’s HVAC/R and Mechanical licenses?

Each one covers gas piping and HVAC systems. HVAC/Refrigeration also includes refrigeration for processing or preserving food, and its journeyperson exam runs 3 hours rather than 2.

Does Iowa offer HVAC license reciprocity?

Only for sheet metal, which has an agreement with South Dakota. HVAC/Refrigeration and Mechanical licenses don’t have one.

How much CE does an Iowa HVAC license require?

As many as 16 hours each renewal. For journeyperson sheet metal licenses, it’s 8 hours every 3 years.

Where this information comes from

  1. Iowa Plumbing and Mechanical Systems Board, Licensure
  2. Iowa Plumbing and Mechanical Systems Board, Licensure (sheet metal)
  3. Kirkwood Community College, State discipline exams
  4. Iowa Code chapter 105
  5. 2024 International Mechanical Code (ICC)
  6. NFPA 54: National Fuel Gas Code, 2024
  7. Iowa Administrative Code 481 chapter 428, Plumbing and Mechanical Systems Board licensure fees (PDF)
  8. Iowa Plumbing and Mechanical Systems Board, Licensing period & fees

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Iowa Plumbing and Mechanical Systems Board.