
Home Licenses Low Voltage License Alabama
Low Voltage License · Special Systems (50V or less)
Alabama Low Voltage License: Requirements, Exam and How to Apply
In Alabama, low voltage contractors are licensed under the Low Voltage Special Systems classification, issued by the Licensing Board for General Contractors. Learn what the license covers, how much experience you need, the two exams and the application steps.
Last updated October 27, 2026 from Alabama Licensing Board for General Contractors requirements
Exam time
2 hrs
For the Low Voltage trade exam; Business & Law is separate
Time to get license
8,000 hrs
Of work experience, with up to 2,000 able to come from schooling
Continuing ed
Not required
This license has no CE
Do you need an Alabama low voltage license?
Contracting for special systems work at 50 volts or less in Alabama falls under the Low Voltage Special Systems classification. You get it through the Licensing Board for General Contractors after passing two exams.
You need the license when
- Your work is special systems, cabling and interconnections, inside or outside, running at 50 volts or less
- The systems are fire alarm, security, telecom, CATV, or audio and visual
- You handle temperature control circuits or the control circuits for door and gate operators
- The site is residential or commercial, publicly or privately owned
Exceptions
- This classification doesn’t cover wiring circuits that run above 50 volts
- We couldn’t confirm any other exemptions, so ask the Board
What happens if you work unlicensed
What you can take on is limited by your classification. Because the Board licenses and regulates contractors and can act against anyone working without the proper license, make sure your classification fits before you bid.
How to get an Alabama low voltage license in 5 steps
- Build up your experience Before applying
Put in a minimum of 8,000 hours of designing, planning, laying out and directly supervising electrical work. A diploma, certificate or transcript from electrical school can count for as many as 2,000 of those hours. - Request exam approval Before applying
Before you can test, the Alabama Licensing Board for General Contractors has to approve you. Send it your exam application, signed in front of a notary. - Book with PSI Once approved
Schedule both exams with PSI online or at 855-807-3994. You’ll find test centers in larger cities across Alabama. - Pass the two exams Exam day
Sit for the Business & Law exam and the Low Voltage Special Systems exam (50 questions in 2 hours, 70% to pass). You can use books on both. - Mail in your license application
Your pass details arrive by email. Then mail the finished application, the required documents and your fee ($300 for prime, $150 for subcontractor) to the address on the application.
Alabama low voltage application checklist
Everything for Alabama on one page
- Documentation of 8,000 qualifying experience hours
- A diploma, certificate or transcript if schooling counts toward your hours
- Notarized, signed exam application
- A passing score on both the Low Voltage and Business & Law exams
- Finished license application, documents and fee
The Alabama low voltage license
In Alabama, there’s a single classification for low voltage work, and it sets the boundaries of what you’re allowed to do.
LV 50 volts or less
Low Voltage Special Systems
Covers special systems at 50 volts or less on residential or commercial jobs: fire alarm, security, telecom, CATV, audio and visual, temperature controls, door and gate operator controls and similar systems.
| Exam | Low Voltage + B&L |
| Limit | Not stated |
Alabama low voltage license requirements
The Board has qualification, application, financial and exam requirements you must meet. These are the ones we could confirm.
| Requirement | Low Voltage Special Systems |
|---|---|
| Experience | 8,000 hours of designing, planning, laying out and directly supervising electrical work |
| Substituting education | Up to 2,000 hours: 1 year of electrical school counts as half a year of experience |
| Application | Notarized and signed, asking for approval to take the exam |
| Exams | Low Voltage Special Systems + Business & Law |
| Financial requirements | Required (we couldn’t confirm the details) |
| Continuing education | Not required |
The Alabama low voltage exam
There are two exams: the Low Voltage Special Systems trade exam and the Alabama Business & Law exam required of all Alabama contractors. Each is open book, and tabbing and highlighting the allowed references is fine.
Format
Open book
Questions
50 (trade exam)
Passing score
70% (trade exam)
Exam vendor
PSI
Scoring and topics
- Trade exam: 50 questions in 120 minutes; pass at 70%
- Trade subjects: bonding and grounding, fire alarms and detection, intrusion detection, CCTV, CATV and MATV, data and computer systems, and applied system design
- Business & Law subjects: estimating and bidding, licensing, contracts, liens, taxes and payroll, and managing risk
- References include NFPA 72 (2019), NEC 2020 (NFPA 70) and the NASCLA Alabama contractors guide
- See the PSI candidate bulletin for every allowed reference
Retakes
- Waiting period before a retake: we couldn’t confirm it
- Each retake costs $96 per exam, just like your first try
- Business & Law passing score and number of questions: not published in what we checked
- The PSI bulletin has the latest rules
Books and codes for this exam (open book)
The Alabama Low Voltage Special Systems trade exam and the Business and Law exam are open book, and you can tab and highlight the approved references and use them during the test. The list covers both exams.
| Reference | Edition | How it’s used |
|---|---|---|
| NFPA 70: National Electrical Code (NEC) — Low Voltage exam | 2020 | Allowed in exam |
| NFPA 72: National Fire Alarm and Signaling Code — Low Voltage exam | 2019 | Allowed in exam |
| Low Voltage Wiring: Security/Fire Alarm Systems — Low Voltage exam | 3rd edition | Allowed in exam |
| Telecommunications Wiring — Low Voltage exam | 3rd edition | Allowed in exam |
| Understanding and Servicing Alarm Systems — Low Voltage exam | 3rd edition | Allowed in exam |
| Live Sound Reinforcement — Low Voltage exam | Best Seller Edition | Allowed in exam |
| Data, Voice and Video Cabling — Low Voltage exam | 3rd edition | Allowed in exam |
| Antenna Toolkit — Low Voltage exam (print) | 2nd edition | Allowed in exam |
| NASCLA Contractor’s Guide to Business, Law and Project Management, Alabama General Contractors Edition — Business and Law exam | 3rd edition | Allowed in exam |
Low Voltage Wiring: Security/Fire Alarm Systems is out of print, so candidates may need a used copy.
Prep for the Alabama low voltage exam
Our exam prep course, Total Prep and complete bundle for the Alabama low voltage exam. Prices are coming soon.
Books for this exam
-

Antenna Toolkit, 2nd edition
Price coming soon -

Data, Voice and Video Cabling, 3rd edition
Price coming soon -

Live Sound Reinforcement, Bestseller Edition, Best Seller Edition
Price coming soon -

Low Voltage Wiring: Security/Fire Alarm Systems
Price coming soon -

NASCLA Contractors Guide to Business, Law and Project Management, Alabama General Contractors, 3rd edition
Price coming soon -

NFPA 70: National Electrical Code (NEC), 2020 Edition
Price coming soon -

NFPA 72: National Fire Alarm and Signaling Code, 2019 Edition
Price coming soon -

Telecommunications Wiring, 3rd edition
Price coming soon -

Understanding and Servicing Alarm Systems, 3rd edition
Price coming soon -

Book Tabs
Price coming soon
Renewing your Alabama low voltage license
This license has no continuing education requirement in Alabama. Each year you renew for $200 (prime) or $100 (subcontractor).
Renewal cycle
Annual
CE hours
None
Renewal fee
$200 prime; $100 subcontractor
Late penalty
Not stated
Licensed in another state?
For the Low Voltage Special Systems license, the sources we checked show no reciprocity agreements at all.
No reciprocity
We couldn’t find any, so expect to apply as a new applicant and pass both exams. If you’re licensed in another state, ask the Board.
City and county rules in Alabama
The state Board issues your license, while local offices still oversee permits and inspections for every job.
The state handles
- Low Voltage Special Systems licenses
- Approving you to test, with PSI running the exams
- Reviewing your qualifications, financials and application
Cities & counties handle
- Electrical and building permits
- Inspections
- Local business licenses, if any
Alabama’s low voltage licensing board
What the board does
- Licenses Low Voltage Special Systems contractors
- Approves who can take the exams
- Looks over experience, financials and applications
- Defines what each classification allows
Alabama low voltage license: common questions
What work does an Alabama low voltage license cover?
Special systems running at 50 volts or less, such as fire alarm, security, telecom, CATV, audio and visual, and gate operator or temperature control circuits. Wiring for circuits over 50 volts isn’t included.
How much experience does an Alabama low voltage license take?
You need 8,000 hours or more of designing, planning, laying out and directly supervising electrical work. As many as 2,000 of those hours can come from electrical schooling instead.
How many exams are required for an Alabama low voltage license?
You take two, both through PSI: the Alabama Business & Law exam and the Low Voltage Special Systems trade exam.
Can you use books on the Alabama low voltage exam?
Yes. You get 120 minutes for 50 trade exam questions, 70% passes, and the allowed references can be tabbed and highlighted.
Do Alabama low voltage contractors need CE?
No. This Alabama license has no continuing education requirement.
Who issues Alabama’s low voltage license?
The Alabama Licensing Board for General Contractors issues it. You apply to the Board and book both exams with PSI.
Where this information comes from
- Alabama Licensing Board for General Contractors
- PSI, Alabama candidate information bulletin
- PSI, Alabama exam scheduling
- Alabama Licensing Board for General Contractors, prime contractor application instructions (PDF)
- Alabama Licensing Board for General Contractors, subcontractor application instructions (PDF)
- Alabama Licensing Board for General Contractors, 2026 prime renewal form (PDF)
- Alabama Licensing Board for General Contractors, 2026 subcontractor renewal form (PDF)
Last updated October 27, 2026. Spot something out of date? Tell us.
Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Alabama Licensing Board for General Contractors.