
Home Licenses Plumber License Washington
Plumber License · Journeyman Plumber
Washington Plumber License: Requirements, Exam and How to Apply
The Department of Labor & Industries certifies journeyman plumbers in Washington. This guide covers how much experience you need, how the theory and practical exams work and what renewal involves.
Last updated October 27, 2026 from Washington State Department of Labor & Industries requirements
Exam time
Not stated
A theory exam and two sizing drawings
Time to get license
~4 yrs
8,000 trainee hrs, with 4,000 in commercial or industrial work
Continuing ed
16 hrs
Per licensing period, before you renew
Do you need a Washington plumber license?
Yes. Working as a journeyman plumber in Washington takes a plumber certificate from the Department of Labor & Industries. To earn it, you put in supervised hours as a trainee and then pass the theory and practical exams.
You need the license when
- Your work includes installing, altering, repairing or renovating potable water systems
- You work on systems that carry liquid waste
- You work on medical gas piping within a building’s footprint
Exceptions
- While logging hours, trainees work with a certified journey-level plumber supervising them
- Journeyman work is limited to a building’s footprint
What happens if you work unlicensed
We couldn’t confirm specific fines. Labor & Industries oversees plumber certification and can take action against anyone plumbing without the proper certificate. Get certified before working on your own.
How to get a Washington plumber license in 5 steps
- Work as a trainee ~4 years
You need 8,000 hours or more with a certified journey-level plumber supervising, and no fewer than 4,000 of them on commercial or industrial jobs. - Finish pre-test education Before testing
Take 16 hours of education approved by Washington, including at least 4 hours from the industry-related electrical category. - Get approved for the exam Before scheduling
Get your exam application and the $202.10 fee to L&I. When you’re approved, PSI sends you an email. Pay the $84 exam fee, then book by phone at 855-746-8173 or through PSI’s Washington plumbing page. - Pass the theory and practical exams Exam day
You’ll take a 100-question theory exam and complete two sizing drawings: one for waste and vent, one for water pipe. - Pay the certificate fee You have 90 days
After you pass, you have 90 days to pay L&I the $242.70 certificate fee. Miss that window and you’ll have to reapply and retest. For questions, call 360-902-5207 or go to the Labor & Industries plumber certification page.
Washington plumber application checklist
Washington’s application on one page
- 8,000 trainee hours, documented
- 4,000 of them in commercial or industrial work
- 16 hours of pre-test education done
- PSI exam pre-approval
- Passing scores on both the theory and practical exams
Washington plumber license classes
The focus here is the journeyman plumber certificate. You reach it by spending your trainee years supervised by a certified journey-level plumber.
TRN Where you start
Plumber trainee
Works with a certified journey-level plumber supervising, building up the hours required for the journeyman exam.
| Exam | None |
| Limit | Only supervised work |
JRY Most common
Journeyman Plumber
Covers potable water, liquid waste and medical gas piping inside a building’s footprint: installation, alterations, repairs and renovations.
| Exam | Plumbing Theory plus Practical |
| Limit | Within the building footprint |
Requirements for each Washington plumber class
Here’s what you need in place before you can take the journeyman exams.
| Requirement | Journeyman Plumber |
|---|---|
| Total experience | 4+ years (8,000 hours minimum) working as a trainee under a certified journey-level plumber |
| Commercial or industrial | 2+ years (4,000 hours minimum) |
| Pre-test education | 16 hours of education approved by Washington, with at least 4 in the industry-related electrical category |
| Exams | Plumbing Theory and Plumber Practical |
| Exam pre-approval | Required |
| Minimum age | Not stated |
The Washington plumber exam
There are three parts to the journeyman exam: a written theory section and two sizing drawings. In 2021, Washington adopted the 2018 Uniform Plumbing Code through WAC Chapter 51-56, so you’ll want to study the state amendments as well.
Format
Written plus sizing drawings
Questions
100 (Part 1)
Passing score
70 right (Part 1)
Exam vendor
PSI
Scoring and content
- Part 1 has 100 questions and you pass with 70 correct; it’s listed as closed book
- Part 1 covers the Washington amendments to UPC Chapters 1–10, 15, 16 and 17
- Part 2 is a waste and vent pipe sizing drawing using Chapter 7 methods
- Part 3 is a water pipe sizing drawing using Chapter 6 methods
- The code is the 2018 Uniform Plumbing Code plus the state’s amendments
Retakes
- Each portion you retake costs $52
- Same-day rebooking isn’t allowed; if seats are available, you can retest as soon as two days later
- You need pre-approval before scheduling
- For scheduling questions, call PSI at 855-746-8173
- Ask PSI which references each part allows
Books and codes for this exam (varies)
The sources we checked list Part 1 of the Journeyman Plumber exam (Washington amendments) as closed book, while also saying Washington references can be tabbed, highlighted and used during the test. Parts 2 and 3 are pipe-sizing drawings based on Chapters 6 and 7 of the UPC, so check the PSI candidate bulletin for what you can bring in.
| Reference | Edition | How it’s used |
|---|---|---|
| Uniform Plumbing Code (UPC) | 2018 | Not stated |
| Washington State Building Code Amendments to the UPC | Not stated | Not stated |
Prep for the Washington plumber exam
Our exam prep course, Total Prep and complete bundle for the Washington plumber exam. Prices are coming soon.
Books for this exam
Renewing your Washington plumber license
Before renewing, Washington plumbers take 16 hours of continuing education every licensing period. A journey-level certificate renews every three years and costs $242.70. We couldn’t confirm a late penalty, so check with L&I.
Renewal cycle
Every 3 years
CE hours
16
Renewal fee
$242.70
Late penalty
Not stated
Washington plumber CE
Hours, deadlines, required topics and the renewal steps, in one guide.
Licensed in another state?
Idaho is the state Washington has a reciprocity agreement with. Plumbers from anywhere else apply as new applicants.
Idaho: reciprocity agreement
We couldn’t confirm what the agreement waives, so check the terms with L&I before applying.
Every other state: no agreement
You apply as a new applicant: show your hours, finish the pre-test education and pass the exams.
City and county rules in Washington
The state issues your plumber certificate. The job-site side of plumbing is up to cities and counties.
The state handles
- Certificates for trainees and journeyman plumbers
- Approving exams (testing is through PSI)
- Rules for pre-test education and CE
- Washington’s amendments to the plumbing code
Cities and counties handle
- Plumbing permits
- Inspections
- Local business licensing
Who oversees plumbers in Washington
Licensing authority
Washington State Department of Labor & Industries
360-902-5207
What the board does
- Grants and renews plumber certificates
- Approves who can take the PSI exams
- Sets the pre-test education and CE requirements
- Handles reciprocity with Idaho
Washington plumber license: common questions
How many hours does it take to become a journeyman plumber in Washington?
You need at least 8,000 hours (4 years) as a trainee working under a certified journey-level plumber, and 4,000 or more of those hours have to be commercial or industrial.
What’s on the Washington journeyman plumber license exam?
There’s a 100-question theory section on the state’s amendments to the Uniform Plumbing Code, then two drawings: one for waste and vent sizing and one for water pipe sizing.
What’s the passing score on the Washington journeyman plumber exam?
You need 70 out of 100 right on the theory section.
Do you need education before the Washington plumber license exam?
Yes. First you complete 16 hours of education approved by Washington, and at least 4 of those hours have to come from the industry-related electrical category.
Which plumbing code is used for the Washington plumber license?
Washington uses the 2018 Uniform Plumbing Code with state amendments, adopted in 2021 through WAC Chapter 51-56.
How many CE hours do Washington plumbers need?
You need 16 hours every licensing period, before you renew.
Can I use my out-of-state plumbing license in Washington?
Washington has a reciprocity agreement with Idaho. If you’re licensed in any other state, you apply as a new applicant.
Where this information comes from
- Washington L&I, Plumber certification
- PSI, Washington plumbing exams
- Washington State Building Code Council, UPC amendments (PDF)
- WAC Chapter 51-56, Uniform Plumbing Code
- WAC 296-400A-045, Plumbing certificate fees
- PSI, Washington plumber candidate information bulletin (PDF)
Last updated October 27, 2026. Spot something out of date? Tell us.
Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Washington State Department of Labor & Industries.
