
Home Licenses Low Voltage License Washington
Low Voltage License · Electrician, Administrator & Master
Washington Low Voltage License: Requirements, Exam and How to Apply
Washington treats low voltage work as the 06 Limited Energy electrical specialty. This guide walks through the Department of Labor & Industries’ rules on experience, classroom hours, exams and renewal.
Last updated October 27, 2026 from Washington State Department of Labor & Industries requirements
Exam time
3 hrs
For the master exam; we couldn’t confirm times for the other 06 exams
Time to get license
4,000 hrs
Supervised on-the-job hours, and 48 hours in the classroom
Continuing ed
24 hrs
Per licensing period
Do you need a Washington low voltage license?
Yes. Washington licenses low voltage electrical work as a specialty known as 06 Limited Energy. It includes signaling and power-limited circuits in every type of occupancy, and you have to be certified before working on your own.
You need the license when
- Telecom (telecommunications) work, intrusion alarms, or signaling systems for fire protection are part of your job
- You wire low-voltage HVAC/refrigeration controls, lighting control or energy management systems
- You put in automation and industrial control systems
- You put in amplified sound or public address systems for homes or businesses
Exceptions
- While building hours, trainees can do this work as long as a certified 06 specialty electrician or a journey level electrician supervises them at least 75% of the time
- Anything past low-voltage, power-limited circuits is outside this specialty and calls for another electrical certificate
What happens if you work unlicensed
We couldn’t confirm penalty amounts. L&I enforces RCW 19.28, the state’s electrical licensing law, and can take action against anyone doing electrical work without the proper certificate.
How to get a Washington low voltage license in 6 steps
- Work under supervision as a trainee 4,000 hours
As a trainee, you need 4,000 hours of experience. A certified 06 specialty electrician or a journey level electrician must supervise you for at least 75% of those hours. - Finish basic classroom instruction 48 hours
Testing opens up only after you complete 48 hours of state-required coursework. L&I explains it on its basic classroom page. - File your experience affidavit Before applying
L&I has to have an affidavit of your classroom and experience hours. Call 360-902-5269 to make sure it’s on file. - Send in your application and fees
You can apply online, by mail or in person at your local Labor & Industries office. - Book and pass the PSI exam Exam day
After you’re approved, L&I mails a notice telling you how to schedule with PSI. You can use books on the exam. - Get your certificate Once you pass
You’ll receive a Washington electrical certificate from L&I showing the 06 Limited Energy specialty.
Washington low voltage application checklist
Washington’s application on one page
- 4,000 hours of work experience under supervision
- 48 hours of basic classroom instruction done
- Experience affidavit filed with L&I
- L&I application and fees sent
- Scheduling notice for PSI from L&I
- A passing score on the 06 Limited Energy exam
Washington low voltage license classes
There are three exams under the 06 Limited Energy specialty, based on your role: the electrician doing the work, the administrator overseeing a contractor’s electrical work, and the master electrician.
06 Most common
Limited Energy Electrician
Handles power-limited and signaling circuits: alarms and fire signaling, telecom, sound systems, and lighting and low-voltage HVAC controls.
| Exam | 51 questions |
| Limit | Low voltage only |
06 Admin Business role
Limited Energy Administrator
The administrator-level exam under the 06 Limited Energy specialty.
| Exam | 61 questions |
| Limit | Low voltage only |
06 Master Top tier
Limited Energy Master Electrician
The master-level exam under the 06 Limited Energy specialty.
| Exam | 70 questions, 3 hrs |
| Limit | Low voltage only |
Requirements for each Washington low voltage class
The sources we checked spell out the 06 electrician requirements in full. For the administrator and master exams, they only cover the exam details.
| Requirement | 06 Electrician | 06 Administrator | 06 Master |
|---|---|---|---|
| Work experience | 4,000 hours | Not stated | Not stated |
| Classroom instruction | 48 hours of basic classroom instruction | Not stated | Not stated |
| Supervision as a trainee | At least 75% of the time | Not stated | Not stated |
| Exam questions | 51 | 61 | 70 |
| Passing score | Not stated | Not stated | 70% |
| Time limit | Not stated | Not stated | 3 hours |
The Washington low voltage exam
Every 06 Limited Energy exam is open book, and PSI gives it once L&I approves your application. You’ll see questions on electrical theory, the NEC and Washington’s own electrical codes.
Format
Open book
Questions
51 / 61 / 70
Passing score
70% (for master)
Exam vendor
PSI
Scoring and content
- 51 questions for electrician, 61 for administrator, 70 for master
- Master: 3 hours; pass with 70%
- Covers NEC and theory, along with Washington codes
- You can tab and highlight your references, RCW 19.28 and WAC 296-46B among them
- The state adopted the 2023 NEC, but the exams still haven’t moved to it
Retakes
- After you fail, wait 14 days to retest; after a third failure, wait 3 months
- You book with PSI using the notice L&I sends you by mail
- PSI charges for retest sections by the hour: $45 for 1 hour, $55 for 2 hours
Books and codes for this exam (open book)
The 06 Limited Energy Electrician, Master and Administrator exams are open book, and you can tab and highlight these references and bring them into the PSI exam.
| Reference | Edition | How it’s used |
|---|---|---|
| NFPA 70: National Electrical Code (NEC) | 2020 | Allowed in exam |
| NFPA 70: National Electrical Code (NEC) | 2023 | Allowed in exam |
| Ugly’s Electrical References | 2023 | Allowed in exam |
| Fast WAC & RCW Finder | Not stated | Allowed in exam |
| RCW Chapter 19.28: Electricians and Electrical Installations | Not stated | Allowed in exam |
| WAC Chapter 296-46B: Electrical Safety Standards, Administration, and Installation | Not stated | Allowed in exam |
Washington has adopted the 2023 NEC, but the exams haven’t switched over yet (no date set), so check which NEC edition your exam uses before you buy.
Prep for the Washington low voltage exam
Our exam prep course, Total Prep and complete bundle for the Washington low voltage exam. Prices are coming soon.
Books for this exam
-

Chapter 19.28 RCW: Electricians and Electrical Installations
Price coming soon -

Chapter 296-46B WAC: Electrical Safety Standards, Administration, and Installation
Price coming soon -

NFPA 70, National Electrical Code: 2023 Edition
Price coming soon -

NFPA 70: National Electrical Code (NEC), 2020 Edition
Price coming soon -

Ugly’s Electrical References, 2023 Edition
Price coming soon -

Book Tabs
Price coming soon
Renewing your Washington low voltage license
Licensed electricians renew by taking 24 hours of continuing education every licensing period. Renewing a specialty electrician certificate costs $106.40, or $92.60 if you do it online. We couldn’t confirm the cycle length, so ask L&I.
Renewal cycle
Every licensing period
CE hours
24
Renewal fee
$106.40 ($92.60 online)
Late penalty
Renewing late costs $212.90 ($185.30 online)
Licensed in another state?
Washington and Idaho have a reciprocity agreement. We couldn’t confirm exactly what it waives, so check the details with L&I.
Idaho: reciprocity agreement
Idaho and Washington share a reciprocity agreement for electrical licensing. Ask L&I which requirements transfer for the 06 specialty.
Every other state: no agreement
You apply as a new applicant: show your classroom and experience hours, and then pass the PSI exam.
City and county rules in Washington
The state issues electrical certificates through L&I. We couldn’t confirm any separate city or county licenses for limited energy work.
The state handles
- 06 Limited Energy certificates
- Classroom hours and experience affidavits
- Approving exams (testing is through PSI)
- CE for renewal
Cities and counties handle
- Building permits for each job
- Local business licensing
Who oversees low voltage electricians in Washington
Licensing authority
Washington State Department of Labor & Industries
360-902-5269
What the board does
- Grants and renews electrician certificates, the 06 Limited Energy specialty among them
- Keeps classroom and experience affidavits on record
- Approves exam applications and mails PSI scheduling notices
- Sets the rules for basic classroom instruction and CE
Washington low voltage license: common questions
Is there a low voltage license in Washington?
Yes. The Department of Labor & Industries issues it as the 06 Limited Energy electrical specialty.
How many hours do you need for a Washington limited energy license?
Before you can sit the 06 electrician exam, you need 48 hours of basic classroom instruction and 4,000 hours of supervised work experience.
What work does Washington’s limited energy license cover?
Power-limited and signaling circuits. That includes intrusion alarms, telecom, fire protection signaling, sound systems, and automation, lighting and low-voltage HVAC controls.
Is the Washington limited energy license exam open book?
Yes. PSI gives the exams, and they’re open book. For master, you get 70 questions in 3 hours and need 70% to pass.
How much supervision do Washington limited energy trainees need?
A certified 06 specialty electrician or a journey level electrician has to supervise trainees at least 75% of the time.
Does Washington have reciprocity for low voltage licenses?
Yes, with Idaho. If you’re from another state, you apply as a new applicant.
How much continuing education do Washington low voltage electricians need?
You need 24 hours every licensing period to renew.
Where this information comes from
- Washington L&I, Electrical licensing, exams and education
- Washington L&I, Basic classroom instruction and continuing education
- RCW Chapter 19.28, Electricians and electrical installations (PDF)
- WAC Chapter 296-46B, Electrical safety standards, administration and installation (PDF)
- NFPA 70, National Electrical Code
- WAC 296-46B-909, Electrical certificate and examination fees
- PSI, Washington L&I electrical candidate information bulletin (PDF)
Last updated October 27, 2026. Spot something out of date? Tell us.
Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Washington State Department of Labor & Industries.