Washington Electrician License: Requirements, Exam and How to Apply, Washington Electrician License, Washington, Journeyman Electrician, Master Electrician, Electrical Administrator, Washington State Department of Labor & Industries, how to get a Washington Electrician License, Washington Electrician License requirements, Washington Electrician License exam, Washington licensing board, Washington contractor license, license application steps, exam reference books, Experience, Commercial/industrial hours, Classroom instruction, Time limit, Allowed in exam

Home Licenses Electrician License Washington

Electrician License · Journeyman, Master & Administrator

Washington Electrician License: Requirements, Exam and How to Apply

This guide uses the Department of Labor & Industries’ requirements to show you how to qualify for, apply for and pass the exam for a journeyman, master or electrical administrator certificate in Washington.

Last updated October 27, 2026 from Washington State Department of Labor & Industries requirements

Exam time

4 hrs

For journeyman; the master exam runs 7 hrs

Time to get license

8,000 hrs

Trainee hours under supervision, and 96 hours in the classroom

Continuing ed

24 hrs

Per licensing period

Do you need a Washington electrician license?

Yes. The Department of Labor & Industries (L&I) certifies and licenses electrical work in Washington. Each person holds a certificate matching the work they do, and each electrical contractor must have a designated administrator or master electrician on record.

You need the license when

  • Your work includes installing or maintaining wiring and equipment for light, heat or power
  • Your work includes installing or maintaining communication, signaling, remote control or power-limited circuits
  • You serve as the administrator responsible for keeping an electrical contractor’s work in compliance
  • Owning an electrical contracting company, which calls for a contractor license, a bond and an assigned master or administrator

Exceptions

  • While logging hours, electrical trainees may work if a certified electrician supervises them
  • Specialty electricians (limited energy, for example) sit their own specialty exams rather than the general journeyman exam

What happens if you work unlicensed

We couldn’t confirm penalty amounts. L&I enforces the state’s electrical laws, RCW 19.28 and WAC 296-46B, and can act against anyone, person or company, working without the certificate or license they need.

How to get a Washington electrician license in 6 steps

  1. Build up your trainee hours Before applying
    As an electrical trainee, put in 8,000 hours under a certified electrician, at least 4,000 of them on commercial or industrial jobs. You also finish 96 hours of classroom instruction.
  2. Submit your experience affidavit Before applying
    L&I has to have an affidavit of your classroom and experience hours on file. Call 360-902-5269 to make sure they got it.
  3. Send in your application and fees
    You can apply online, by mail or in person at a local L&I office. After L&I reviews and approves it, they mail you instructions for booking your exam.
  4. Pass the PSI exam Exam day
    It’s an open-book exam. Bring the allowed references, such as RCW 19.28 and WAC 296-46B, along with any original copyrighted references.
  5. Get your certificate Once you pass
    When every step is done, L&I issues your Washington electrical certificate.
  6. For contractors: set up your business If you’re contracting
    There are three pieces: an electrical contractor license, a surety bond or assignment of savings account, and the Change Assignment of Administrator’s/Master Certificate form on file.

Washington electrician application checklist

Washington’s application on one page

  • 8,000 trainee hours under supervision (4,000 commercial or industrial)
  • 96 classroom hours done
  • Experience affidavit filed with L&I
  • L&I application and fees sent
  • PSI exam booked once you’re approved
  • For contractors: a bond and an assigned administrator or master

Washington electrician license classes

There are three main credentials for individuals in Washington. On top of that, contractors hold a contractor license with an assigned administrator or master electrician.

JRY Most common

Journeyman Electrician

Handles installing and maintaining wiring and equipment for light, heat and power, along with communication, signaling, control and power-limited circuits.

Exam77 questions, 4 hrs
LimitNot stated

MST 4 yrs as a journeyman

Master Electrician

Does electrical installation and, when assigned, serves as the administrator who keeps a contractor in compliance.

Exam110 questions, 7 hrs
LimitNot stated

ADM Required for contractors

Electrical Administrator

Keeps a contractor’s work within the law. You pick General or a Specialty in 1 of 14 areas, matched to what the contractor specializes in.

Exam92 questions
LimitNot stated

Requirements for each Washington electrician class

Every level builds on the previous one. You can’t test until L&I has your experience affidavit on file.

RequirementJourneymanMasterAdministrator
Experience8,000 hours as a trainee under a certified electrician4 years holding a general journeyman certificateNot stated
Commercial/industrial hours4,000 out of the 8,000Not statedNot stated
Classroom instruction96 hoursNot statedNot stated
Exam77 questions; pass with 54 correct110 questions; pass with 77 correct92 questions; pass with 65 correct
Time limit4 hours7 hoursNot stated

The Washington electrician exam

Each credential has its own exam, and you schedule it through PSI once L&I approves you. Since the exams are open book, knowing your way around the references matters a lot.

Format

Open book

Questions

77 / 110 / 92

Passing score

54 / 77 / 65 right

Exam vendor

PSI

Scoring and content

  • Journeyman: 4 hours, 77 questions, pass with 54 correct; covers NEC, theory and Washington codes
  • Master: 7 hours, 110 questions, pass with 77 correct; major load calculations are added
  • Administrator: 92 questions; pass with 65 correct
  • The state adopted the 2023 NEC, but the exams haven’t switched over to it yet
  • You can tab and highlight your references

Retakes

  • How long you wait: 14 days after you fail, or 3 months after a third failed attempt
  • What it costs: PSI charges for retest sections by the hour, starting at $45 for 1 hour and going up to $105 for 7 hours
  • Ask L&I or PSI for the latest retake rules

Books and codes for this exam (open book)

The Washington Journeyman, Master and Electrical Administrator exams are open book, and you can tab and highlight these references and bring them into the PSI exam. Any original copyrighted reference material is also allowed.

ReferenceEditionHow it’s used
NFPA 70: National Electrical Code (NEC)2020Allowed in exam
NFPA 70: National Electrical Code (NEC)2023Allowed in exam
Ugly’s Electrical References2023Allowed in exam
Fast WAC & RCW FinderNot statedAllowed in exam
RCW Chapter 19.28: Electricians and Electrical InstallationsNot statedAllowed in exam
WAC Chapter 296-46B: Electrical Safety Standards, Administration, and InstallationNot statedAllowed in exam

Washington has adopted the 2023 NEC, but the exams haven’t switched over yet (no date set), so check which NEC edition your exam uses before you buy.

Prep for the Washington electrician exam

Our exam prep course, Total Prep and complete bundle for the Washington electrician exam. Prices are coming soon.

Books for this exam

Renewing your Washington electrician license

To renew, licensed electricians take 24 hours of continuing education every licensing period.

Renewal cycle

Not stated

CE hours

24

Renewal fee

Journeyman: $106.40 ($92.60 online); master or administrator: $202.20 ($175.70 online)

Late penalty

A late journeyman renewal costs $212.90 ($185.30 online)

Washington electrician CE

Hours, deadlines, required topics and the renewal steps, in one guide.

Licensed in another state?

Idaho is the one state Washington has a reciprocity agreement with. Applicants from anywhere else apply as new applicants.

Idaho: reciprocity agreement

We couldn’t confirm the terms or what gets waived. Check with L&I to see how they treat an Idaho license.

Every other state: no agreement

You apply as a new applicant, show your hours and pass the Washington exam.

City and county rules in Washington

The state, through L&I, issues both electrical certificates and contractor licenses.

The state handles

  • Certificates for journeymen, masters and administrators
  • Electrical contractor licensing and bonds
  • Approving exams (through PSI)
  • Renewals and continuing education

Cities and counties handle

  • Local business licensing
  • Any local permit or inspection rules (ask your city)

Who oversees electricians in Washington

Licensing authority

Washington State Department of Labor & Industries

360-902-5269

lni.wa.gov electrical licensing, exams & education

What the board does

  • Grants journeyman, master and administrator certificates
  • Licenses electrical contractors and keeps track of their assigned administrators
  • Approves who can take the PSI exams
  • Enforces WAC 296-46B and RCW 19.28

Washington electrician license: common questions

How many hours does it take to become a journeyman electrician in Washington?

You need 8,000 hours as an electrical trainee working under a certified electrician, and at least 4,000 of them have to be commercial or industrial. On top of that, you complete 96 hours of classroom instruction.

Can you bring books to the Washington electrical license exam?

Yes, it’s open book. Bring the allowed references (tabbing and highlighting are fine) and any original copyrighted references.

How many questions are on the Washington journeyman electrician exam?

There are 77 questions, and you need 54 right to pass. The time limit is 4 hours.

How do you become a master electrician in Washington?

After holding a general journeyman certificate for at least 4 years, you pass the master exam. It has 110 questions, takes 7 hours and needs 77 correct.

What does a Washington electrical administrator do?

The administrator keeps a contractor’s work within the law. Each electrical contractor must always have one assigned, either General or in one of 14 specialties.

Does Washington have reciprocity for electrician licenses?

Only with Idaho. Electricians from every other state apply as new applicants.

How many CE hours do Washington electricians need?

You need 24 hours every licensing period.

Where this information comes from

  1. Washington L&I, Electrical licensing, exams & education
  2. RCW Chapter 19.28, Electricians and electrical installations (PDF)
  3. WAC Chapter 296-46B, Electrical safety standards, administration and installation (PDF)
  4. WAC 296-46B-909, Electrical certificate and examination fees
  5. PSI, Washington L&I electrical candidate information bulletin (PDF)

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Washington State Department of Labor & Industries.