
Home Licenses HVAC License Washington
HVAC License · 06A HVAC/R Specialty
Washington HVAC License: Requirements, Exam and How to Apply
Washington requires the 06A HVAC/R specialty electrician certificate from Labor & Industries for the electrical side of HVAC and refrigeration work. This guide covers what the certificate includes, how many hours you need and how the two PSI exams work.
Last updated October 27, 2026 from Washington State Department of Labor & Industries requirements
Exam time
3 hrs
2 hrs for NEC & Theory and 1 hr for Laws & Rules
Time to get license
4,000 hrs
Supervised on-the-job hours, and 48 hours in the classroom
Continuing ed
24 hrs
Per licensing period
Do you need a Washington HVAC license?
Yes, when you work on the electrical components of HVAC/R equipment. The 06A specialty includes both low-voltage and line-voltage parts, with no cap on voltage, phase or amperage. You work as a supervised trainee until you’re certified.
You need the license when
- Your work includes installing, fixing, replacing or maintaining line-voltage parts inside HVAC/R units
- You install control wiring in homes and in some commercial settings
- You put in flexible whips shorter than 6 feet or short runs of protective raceway for low-voltage cable
- You connect metal gas piping to an existing grounding conductor (bonding)
Exceptions
- Before you’re certified, you can do 06A work as a trainee as long as a certified 06A specialty electrician or a journey-level electrician supervises you at least 75% of the time
- This work is already covered for journey-level electricians, who are also allowed to supervise 06A trainees
What happens if you work unlicensed
We couldn’t confirm penalty amounts. L&I can act against anyone doing electrical work without the proper certificate, so keep working under supervision until you’re certified.
How to get a Washington HVAC license in 6 steps
- Work under supervision as a trainee 4,000 hrs
A certified 06A specialty electrician or a journey-level electrician has to oversee your hours, and they must be supervising you for at least 75% of the time. - Finish basic classroom instruction 48 hrs
You need the basic classroom hours done first; apply after that. - Submit your experience affidavit Before applying
L&I has to have an affidavit of your classroom and experience hours on file. Call 360-902-5269 to make sure it’s there. - Send in your application and fees By mail, online or in person
Get your application and the $114.60 fee to L&I, either by sending it or by bringing it to a local L&I office. Once you’re approved, L&I mails you instructions for booking the exam. - Pass both PSI exams Exam day
Call PSI at 855-746-8173 to schedule. You’ll take NEC & Theory (2 hrs, pass with 70%) and WA Laws & Rules (1 hr). - Get your certificate Once you pass
When every step is done, L&I issues your 06A HVAC/R certificate.
Washington HVAC application checklist
Washington’s application on one page
- 4,000 hours of trainee experience under supervision
- 48 hours of basic classroom instruction done
- Experience affidavit filed with L&I
- L&I application and fees sent
- PSI exam booked once you’re approved
- Passing scores on both NEC & Theory and WA Laws & Rules
Washington HVAC license classes
The 06A is one of several specialty electrician certificates in Washington. You begin as a trainee, then certify after you finish your hours.
06A Most common
HVAC/R specialty electrician
Covers installing, fixing, replacing and maintaining low- and line-voltage HVAC/R parts, such as control wiring, internal disconnects and gas piping bonding. Parts inside motor control centers or panelboards aren’t included.
| Exam | NEC & Theory plus WA Laws & Rules |
| Limit | No limit on voltage, phase or amps |
TRN Where you start
Electrical trainee
This is where you earn the 4,000 hours of experience. A certified 06A specialty or journey-level electrician has to supervise you at least 75% of the time.
| Exam | None |
| Limit | Nothing over 600 volts |
Requirements for each Washington HVAC class
L&I won’t approve you for the exam until you meet the classroom and experience requirements.
| Requirement | 06A HVAC/R specialty |
|---|---|
| Classroom | 48 hrs of basic classroom instruction |
| Work experience | 4,000 hrs |
| Supervision as a trainee | By a 06A specialty or journey-level electrician, at least 75% of the time |
| Experience affidavit | Filed with L&I before you apply |
| Exams | NEC & Theory and WA Laws & Rules |
| CE to renew | 24 hrs per licensing period |
| Minimum age | Not stated |
The Washington HVAC exam
There are two parts to the 06A exam: an open-book NEC & Theory section and a section on Washington Laws & Rules. The question counts are approximate and may shift a little.
Format
Open book
Questions
34 plus 17
Passing score
70%
Exam vendor
PSI
Scoring and content
- NEC & Theory: roughly 34 questions in 2 hours; pass with 70%
- WA Laws & Rules: roughly 17 questions in 1 hour
- Allowed references include RCW 19.28, WAC 296-46B and the NEC (NFPA 70)
- You can tab and highlight your references
- Ask PSI which edition of the NEC your exam is based on
Retakes
- How long you wait: 14 days after you fail, or 3 months after a third failed attempt
- What it costs: PSI charges for retest sections by the hour, $45 for 1 hour and $55 for 2 hours
- Scheduling opens only once L&I approves your application
- To book, call 855-746-8173 or use the Washington L&I scheduling page at PSI
Books and codes for this exam (open book)
Both 06A HVAC/R exams (NEC and Theory, and WA Laws and Rules) are open book, and you can tab and highlight these references and bring them into the PSI exam.
| Reference | Edition | How it’s used |
|---|---|---|
| NFPA 70: National Electrical Code (NEC) | 2020 | Allowed in exam |
| RCW Chapter 19.28: Electricians and Electrical Installations | Not stated | Allowed in exam |
| WAC Chapter 296-46B: Electrical Safety Standards, Administration, and Installation | Not stated | Allowed in exam |
Washington has adopted the 2023 NEC, but the exams haven’t switched over yet (no date set), so check which NEC edition your exam uses before you buy.
Prep for the Washington HVAC exam
Our exam prep course, Total Prep and complete bundle for the Washington HVAC exam. Prices are coming soon.
Books for this exam
Renewing your Washington HVAC license
To renew, licensed electricians (06A specialty electricians included) take 24 hours of continuing education every licensing period. Renewing costs $106.40, or $92.60 if you do it online. We couldn’t confirm how long the cycle is.
Renewal cycle
Not stated
CE hours
24
Renewal fee
$106.40 ($92.60 online)
Late penalty
Renewing late costs $212.90 ($185.30 online)
Licensed in another state?
Idaho is the state Washington has a reciprocity agreement with. Applicants from anywhere else apply as new applicants.
Idaho: reciprocity agreement
There’s a reciprocity agreement between Idaho and Washington. Before applying, ask L&I which certificates it includes and what it waives.
Every other state: no agreement
You apply as a new applicant: show your hours, file the affidavit and pass both exams.
City and county rules in Washington
The state issues your 06A certificate, and it’s good anywhere in Washington. Each job still needs its permits and inspections.
The state handles
- 06A specialty electrician certificates and the rules for supervising trainees
- Applications and experience affidavits
- Exams (through PSI)
- Renewals and continuing education
Cities and counties handle
- Mechanical and building permits
- Local business licenses, where they apply
Who oversees HVAC/R electricians in Washington
Licensing authority
Washington State Department of Labor & Industries (L&I), Electrical Program
360-902-5269
What the board does
- Grants the 06A and other specialty electrician certificates
- Keeps classroom hours and experience affidavits on record
- Clears applicants to book the PSI exam
- Sets the CE requirements for renewal
Washington HVAC license: common questions
Do you need a license for HVAC work in Washington?
To work on the electrical components of HVAC/R equipment, you need the 06A HVAC/R specialty electrician certificate. Before you have it, you work under supervision as a trainee.
How many hours do you need for the Washington 06A HVAC license?
You need 4,000 hours of work experience and 48 hours of basic classroom instruction, and both have to be done before the exam.
Is the Washington 06A HVAC license exam open book?
Yes. NEC & Theory is open book, with roughly 34 questions in 2 hours, and 70% passes. You also take a WA Laws & Rules exam that lasts 1 hour.
Who can supervise a 06A HVAC trainee in Washington?
You can be supervised by a journey-level electrician or by a certified 06A specialty electrician. Either way, the supervision has to cover at least 75% of your time.
Can a Washington HVAC trainee work on high-voltage circuits?
No. Trainees aren’t allowed on circuits above 600 volts.
Does Washington have reciprocity for HVAC/R licenses?
Yes, with Idaho. If you’re from another state, you apply as a new applicant.
How much continuing education do Washington HVAC/R electricians need?
You need 24 hours every licensing period to renew.
Where this information comes from
- Washington L&I, Electrical licensing, exams & education
- L&I, Basic classroom instruction and continuing education
- RCW Chapter 19.28, Electricians and Electrical Installations (PDF)
- WAC Chapter 296-46B, Electrical Safety Standards (PDF)
- PSI, Washington L&I exam scheduling
- WAC 296-46B-909, Electrical certificate and examination fees
- PSI, Washington L&I electrical candidate information bulletin (PDF)
Last updated October 27, 2026. Spot something out of date? Tell us.
Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Washington State Department of Labor & Industries.
