Georgia HVAC Contractor License: Requirements, Exam and How to Apply, Georgia HVAC Contractor License, Georgia, Restricted Conditioned Air Contractor, Unrestricted Conditioned Air Contractor, Format & topics, Georgia State Board of Conditioned Air Contractors, how to get a Georgia HVAC Contractor License, Georgia HVAC Contractor License requirements, Georgia HVAC Contractor License exam, Georgia licensing board, Georgia contractor license, license application steps, exam reference books, Conditioned Air, Unrestricted, Experience, Conditioned Air exam

Home Licenses HVAC Contractor License Georgia

HVAC Contractor · Class I & Class II

Georgia HVAC Contractor License: Requirements, Exam and How to Apply

In Georgia, an HVAC license goes by the name Conditioned Air Contractor license. Here you’ll find both classes, the experience each one takes, how the open-book exam works and what keeps your license active.

Last updated October 27, 2026 from Georgia State Board of Conditioned Air Contractors requirements

Exam time

7 hrs

Open book, 120 questions

Time to get license

~4–5 yrs

Class I takes 8,000 hours and Class II takes 10,000 hours

Continuing ed

Required

Due before every renewal; we couldn’t confirm the hours

Do you need a Georgia HVAC contractor license?

Yes. Georgia won’t let you bid, offer or do HVAC work until you hold a Conditioned Air Contractor license. The class you need comes down to how big the systems you work on are.

You need the license when

  • You bid on conditioned air contracting or offer to do it
  • You do conditioned air work under a contract, whether express or implied
  • Class I: every system you handle stays within 175,000 BTU heating and 60,000 BTU cooling
  • Your systems are larger, with no size cap (Class II)

Exceptions

  • We couldn’t confirm any exemptions, so check with the Board before you take on work without a license
  • Going past the Class I limits doesn’t exempt you; that work calls for a Class II license

What happens if you work unlicensed

The Board can take action against anyone doing conditioned air work without a license. It has the power to deny, discipline or decline to renew licenses, so get your license before you bid on or start an HVAC job.

How to get a Georgia HVAC contractor license in 6 steps

  1. Choose a class Before you start
    Go with Class I if your jobs stay at or under 175,000 BTU heating and 60,000 BTU cooling. Go with Class II if you want no limit.
  2. Get your experience 8,000–10,000 hours
    You need 8,000 hours for Class I or 10,000 hours for Class II. Collect references from people who worked with you directly.
  3. Complete the design course Before you apply
    Each class has its own course. Class I applicants need ACT107 or a Board-approved course on heat loss/gain and duct design. Class II applicants need a Board-approved course covering Manuals N & Q or Carrier Design 1, 2, 3.
  4. Get pre-approved online Before the exam
    Set up an account in the Georgia Online Application Services portal, which you reach from the Board’s website. If you’re applying for Class I, you’ll also go through a background check and fingerprinting.
  5. Take and pass the exam Exam day
    After the Board approves you, PSI sends instructions, and you book the exam online or by calling 855-898-0711. You get 7 hours for 120 questions, and it’s open book.
  6. Get your license After the exam
    Wrap up the remaining licensing steps with the Board, and stay current on continuing education ahead of every renewal.

Georgia HVAC contractor application checklist

Georgia’s application on a single page

  • Experience: 8,000 hours (Class I) or 10,000 hours (Class II)
  • Finished a Board-approved design course
  • 3 reference letters from qualified professionals
  • EPA certification, Type II or higher
  • Fingerprinting and background check
  • Board pre-approval, followed by a passing exam score

Georgia HVAC contractor license classes

There are two classes of conditioned air contractor in Georgia. They differ in how large the equipment can be, and Class II calls for more experience.

Class I Restricted

Restricted Conditioned Air Contractor

Limited to equipment no bigger than 175,000 BTU of heating and 60,000 BTU of cooling.

ExamConditioned Air, 120 questions
Limit175,000 BTU heat / 60,000 BTU cool

Class II Unrestricted

Unrestricted Conditioned Air Contractor

Covers every kind of conditioned air contracting, whatever the system size.

ExamConditioned Air, 120 questions
LimitUnrestricted

Requirements for each Georgia HVAC contractor class

You need Board pre-approval and a passing exam score for either class. Class II adds more experience and calls for a different design course.

RequirementClass I (Restricted)Class II (Unrestricted)
Experience8,000 hours10,000 hours
ExamConditioned Air exam, after pre-approvalConditioned Air exam, after pre-approval
Design courseACT107 at a Georgia technical school, or a duct design and heat loss/gain course the Board has approvedA Board-approved course in Manuals N & Q or Carrier Design 1, 2, 3
References3 letters from a licensed conditioned air contractor, an architect, an engineer, or a city or county inspectorNot stated
EPA certificationType II or higherNot stated
Background checkFingerprinting and a criminal background checkNot stated

The Georgia HVAC contractor exam

Applicants for both classes sit for the Georgia Conditioned Air Contractor exam. Because it’s open book, you can tab and highlight your approved references and bring them into the test.

Format

Open book

Questions

120

Passing score

Not stated

Exam vendor

PSI

Format & topics

  • 7-hour limit for 120 questions
  • Covers laws, regulations and administrative functions; system design; installation; and system maintenance and repair
  • You can tab and highlight your references
  • Exams have used the 2024 IFGC and IMC since May 1, 2026
  • The Georgia DCA offers the state’s IFGC and IMC amendments for free

Retakes

  • Waiting period: Not stated
  • Retake fee: Not stated
  • You must be pre-approved before you can schedule
  • PSI sends you scheduling instructions after Board approval

Books and codes for this exam (open book)

The Georgia Conditioned Air Contractor exam (Class I Restricted and Class II Unrestricted) is open book. You can bring the approved references below into the test, and they’re allowed to be tabbed and highlighted.

ReferenceEditionHow it’s used
International Mechanical Code (IMC)2024Allowed in exam
International Fuel Gas Code (IFGC)2024Allowed in exam
NFPA 70: National Electrical Code (NEC)2023 or 2020Allowed in exam
ACCA Manual D: Residential Duct Systems3rd editionAllowed in exam
ACCA Manual J: Residential Load Calculation (Full Edition)8th editionAllowed in exam
Refrigeration & Air Conditioning TechnologyNot statedAllowed in exam
Georgia NASCLA Contractor’s Guide to Business, Law and Project Management (Construction Industry Licensing Board)5th editionAllowed in exam
Carrier System Design Manual Part 1: Load EstimatingNot statedAllowed in exam
Carrier System Design Manual Part 2: Air DistributionNot statedAllowed in exam
Carrier System Design Manual Part 3Not statedAllowed in exam
OSHA 1926: Construction Industry RegulationsNot statedAllowed in exam
ACCA Duct Calculation Slide RuleNot statedAllowed in exam
International Energy Conservation Code (IECC)2015Allowed in exam
Georgia State Amendments to the IFGC (free download, print it)Not statedAllowed in exam
Georgia State Amendments to the IMC (free download, print it)Not statedAllowed in exam
Flexible Duct Performance and Installation Standards (free download, print it)Not statedAllowed in exam
Low Pressure Boilers — Class II (Unrestricted) onlyNot statedAllowed in exam

Starting May 1, 2026, the exams are based on the 2024 editions of the IFGC and IMC.

Prep for the Georgia HVAC contractor exam

Our exam prep course, Total Prep and complete bundle for the Georgia HVAC contractor exam. Prices are coming soon.

Books for this exam

Renewing your Georgia HVAC contractor license

Before each renewal, Georgia conditioned air licensees have to finish continuing education. Renewal costs $100. We couldn’t confirm the renewal cycle or the number of CE hours, so ask the Board.

Renewal cycle

Not stated

CE hours

Required (we couldn’t confirm the hours)

Renewal fee

$100

Late penalty

Not stated

Georgia HVAC contractor CE

Hours, deadlines, required topics and the renewal steps, in one guide.

Licensed in another state?

Georgia has reciprocity agreements in place with three states. We couldn’t confirm the exact terms, so ask the Board what gets waived before you apply.

Louisiana: reciprocity agreement

We couldn’t confirm the terms. Check with the Board on what’s waived for Louisiana license holders.

South Carolina: reciprocity agreement

We couldn’t confirm the terms. Check with the Board on what’s waived for South Carolina license holders.

Texas: reciprocity agreement

We couldn’t confirm the terms. Check with the Board on what’s waived for Texas license holders.

Any other state: no agreement

You’ll apply as a new applicant and need to meet Georgia’s experience, course and exam rules.

City and county rules in Georgia

The state issues your conditioned air license, but permits and inspections are still up to the city or county where the job is.

What the state handles

  • Class I and Class II Conditioned Air Contractor licenses
  • Pre-approval for the exam, which PSI gives
  • Continuing education ahead of every renewal
  • Minimum state codes and amendments (via the Georgia DCA)

What cities & counties handle

  • Mechanical permits
  • Inspections
  • Local business licensing

The board that licenses Georgia HVAC contractors

Licensing authority

Georgia State Board of Conditioned Air Contractors

sos.ga.gov/georgia-state-board-conditioned-air-contractors

What the board does

  • Grants and renews Class I and Class II conditioned air licenses
  • Decides who can sit for the exam
  • Signs off on design courses and continuing education
  • Manages reciprocity with Louisiana, South Carolina and Texas

Georgia HVAC contractor license: common questions

Do you need a license for HVAC work in Georgia?

Yes. Before you bid, offer or do conditioned air work, you need a Conditioned Air Contractor license.

How do Georgia’s Class I and Class II HVAC licenses differ?

Class I covers systems with up to 175,000 BTU of heating and 60,000 BTU of cooling. Class II has no size limit.

How much experience does a Georgia HVAC license require?

You need 8,000 hours for Class I or 10,000 hours for Class II.

Is Georgia’s conditioned air license exam open book?

Yes. You get 7 hours for 120 questions, and you can bring your approved references with tabs and highlights. The exam has used the 2024 IFGC and IMC since May 1, 2026.

Who runs the Georgia HVAC license exam?

PSI does. After the Board approves you, PSI sends instructions so you can book your exam date and time.

Does Georgia offer reciprocity for HVAC licenses?

Yes. Georgia has agreements with Louisiana, South Carolina and Texas, but ask the Board about the exact terms before you apply.

Does a Georgia HVAC license require continuing education?

Yes. Licensees in Georgia have to complete continuing education ahead of every renewal.

Where this information comes from

  1. Georgia State Board of Conditioned Air Contractors
  2. Georgia DCA, Current State Minimum Codes for Construction
  3. PSI, Georgia Conditioned Air Contractors Candidate Information Handbook
  4. Georgia Secretary of State, GOALS fee schedules by board

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Georgia State Board of Conditioned Air Contractors.