South Carolina Specialty Contractor License: Requirements, Exam and How to Apply, South Carolina Specialty Contractor License, South Carolina, Non-Structural Renovation, Packaged Equipment, South Carolina Contractor’s Licensing Board, how to get a South Carolina Specialty Contractor License, South Carolina Specialty Contractor License requirements, South Carolina Specialty Contractor License exam, South Carolina licensing board, South Carolina contractor license, license application steps, exam reference books, B&L + Non-Structural Renovation, Trade exam

Home Licenses Specialty Contractor License South Carolina

Specialty Contractor · Renovation & Packaged HVAC

South Carolina Specialty Contractor License: Requirements, Exam and How to Apply

Here you’ll find two South Carolina specialty licenses side by side, Packaged Equipment and Non-Structural Renovation, with the experience, financials, exams and steps that apply to each.

Last updated October 27, 2026 from South Carolina Contractor’s Licensing Board requirements

Exam time

Varies

Including Business & Law: 4 hrs 35 min for Renovation, or 6 hrs 5 min for Packaged Equipment

Time to get license

~2 yrs

For Packaged Equipment, 2 years of field work on commercial jobs

Continuing ed

Not required

You don’t need CE to renew

Do you need a South Carolina specialty contractor license?

Both trades need one. In South Carolina, non-structural remodeling and finish work inside or outside a building takes a Non-Structural Renovation license. For Packaged Equipment, you need a Mechanical Contractor license carrying the Packaged Equipment subclassification before you bid on or perform the work.

You need the license when

  • You install, remodel, renovate or finish interiors or exteriors, and none of it touches the structure’s load-bearing parts
  • As a contractor, you handle work like painting, insulation, cabinets and millwork, windows and doors, drywall, wall covering, waterproofing or flooring (carpet excluded)
  • You install, replace, change or repair packaged heating or air conditioning equipment, whatever its size
  • You intend to bid on Packaged Equipment jobs; the license has to be in hand before you bid

Exceptions

  • Changes to a structure’s load-bearing parts fall outside Non-Structural Renovation and call for another classification
  • Packaged Equipment doesn’t cover steam or hot water heating systems
  • We couldn’t confirm any small-job or owner exemptions, so ask the CLB before bidding

What happens if you work unlicensed

We couldn’t confirm penalty amounts. As a rule, the Contractor’s Licensing Board disciplines licensees and takes action against anyone contracting without a required license. Get licensed before you bid or begin work.

How to get a South Carolina specialty contractor license in 6 steps

  1. Choose your license and Group First
    Decide between Packaged Equipment and Non-Structural Renovation. If it’s Packaged Equipment, choose a Group sized to your jobs: $35,000, $100,000, $200,000, $400,000 or unlimited.
  2. Show your experience Before applying
    If you’re applying for Packaged Equipment, you need 2 years of full-time, hands-on field work on commercial jobs, all within the past 5 years.
  3. Get your financials ready Before applying
    Either post a surety bond or show your Group’s required net worth on a GAAP financial statement. For Groups 3–5, the statement must come from a CPA/PA.
  4. Pass your PSI exams Exam day
    Book your trade exam and Business & Law with PSI. You can use your books on the trade exams, and you have to pass before applying.
  5. Apply with the CLB Once you pass
    Send it to the South Carolina Contractor’s Licensing Board. The Board’s site is llr.sc.gov/clb, and its phone number is 803-896-4686.
  6. Get your license Once approved
    After the CLB approves you, you’re cleared to bid and work inside your classification and up to your Group limit.

South Carolina specialty contractor application checklist

Your South Carolina application at a glance

  • A passing score on Business & Law
  • A passing score on your trade exam
  • Proof of 2 years of commercial field work (for Packaged Equipment)
  • A GAAP financial statement or surety bond for your Group
  • Your application, sent to the Contractor’s Licensing Board

South Carolina specialty contractor license classes

For either license, you pass a trade exam and the Business & Law exam. Packaged Equipment sits under the Mechanical Contractor license as a subclassification, and your Group (1 to 5) caps the size of each bid and job.

NSR Finish & remodel

Non-Structural Renovation

Installation, remodeling and finish work inside and out: drywall partitions, acoustical ceilings, lathing and plastering, windows and doors, fixtures, flooring (carpet excluded), cabinets, millwork, insulation, painting, waterproofing and wall covering.

ExamB&L + Non-Structural Renovation
LimitNot stated

PKG Mechanical subclass

Packaged Equipment

Covers installing, replacing, altering or repairing air conditioning equipment and systems that deliver conditioned air for cooling, heating or both, including package equipment of any size. Steam and hot water heating aren’t included.

ExamB&L + Packaged Equipment
Limit$35,000 (Group 1) to unlimited (Group 5)

Requirements for each South Carolina specialty contractor class

For both licenses, you pass two exams. Packaged Equipment also requires experience plus a financial statement or surety bond that matches your Group.

RequirementNon-Structural RenovationPackaged Equipment
Trade examNon-Structural Renovation (60 questions)Packaged Equipment (80 questions)
Business & Law examRequired (50 questions)Required (50 questions)
ExperienceNot stated2 years of full-time, hands-on field work within the past 5 years (commercial only)
Working capital by Group (1 / 2 / 3 / 4 / 5)Not stated$3,500 / $10,000 / $20,000 / $40,000 / $200,000
Or a surety bond by GroupNot stated$7,000 / $15,000 / $30,000 / $60,000 / $300,000
Type of financial statementNot statedYou prepare it (Groups 1–2), a CPA/PA compiles or prepares it (3–4), a CPA/PA audits it (5)
Continuing edNot requiredNot required

The South Carolina specialty contractor exam

There are two exams: the trade exam for your license and Business & Law. Because the trade exams are open book, knowing where to find things in your references counts as much as knowing the content.

Format

Open book

Questions

50 + 60 or 80

Passing score

70%

Exam vendor

PSI

Scoring & topics

  • Non-Structural Renovation: 60 questions in 150 minutes; you need 70% to pass
  • Packaged Equipment: 80 questions in 4 hours; you need 56 right to pass
  • Business & Law: 50 questions in 125 minutes; you need 35 right to pass
  • On the Renovation exam, expect carpentry, drywall, metal studs, siding, windows and doors, plan reading and OSHA safety
  • On the Packaged Equipment exam, expect equipment, refrigerants, piping, HVACR controls, load calculations, and testing and balancing

Retakes

  • We couldn’t confirm the retake rules; ask PSI
  • PSI takes bookings online (psiexams.com) and by phone at (855) 257-1620 or 855-340-3701
  • You can tab and highlight the approved references
  • You can’t use prep course materials in the exam

Books and codes for this exam (open book)

South Carolina’s Non-Structural Renovation and Packaged Equipment trade exams are open book, and the approved references can be tabbed, highlighted and used during the test. The list below covers both trade exams plus the Business & Law exam that every specialty contractor must also pass.

ReferenceEditionHow it’s used
International Building Code (IBC) — Non-Structural Renovation exam2021Allowed in exam
Carpentry and Building Construction, Student Edition — Non-Structural Renovation exam2016Allowed in exam
Finish Carpenter’s Manual — Non-Structural Renovation examNot statedAllowed in exam
The Gypsum Construction Handbook — Non-Structural Renovation exam7th editionAllowed in exam
Complete Illustrated Guide to Furniture and Cabinet Construction — Non-Structural Renovation examNot statedAllowed in exam
OSHA 1926 Construction Industry Regulations — Non-Structural Renovation and Packaged Equipment examsNot statedAllowed in exam
International Mechanical Code (IMC) — Packaged Equipment exam2021Allowed in exam
International Fuel Gas Code (IFGC) — Packaged Equipment exam2021Allowed in exam
ACCA Duct Calculation Slide Rule — Packaged Equipment examNot statedAllowed in exam
ACCA Manual N: Commercial Load Calculation for Small Commercial Buildings — Packaged Equipment exam5th editionAllowed in exam
ACCA Manual D: Residential Duct Systems — Packaged Equipment exam3rd editionAllowed in exam
ACCA Manual J: Residential Load Calculation (Full Edition) — Packaged Equipment exam8th editionAllowed in exam
Modern Refrigeration and Air Conditioning — Packaged Equipment exam22nd editionAllowed in exam
Pipefitters Handbook — Packaged Equipment examNot statedAllowed in exam
Refrigeration & Air Conditioning Technology — Packaged Equipment examNot statedStudy only
NASCLA Contractor’s Guide to Business, Law and Project Management, Commercial Contractors (South Carolina edition) — Business & Law exam9th editionAllowed in exam

Refrigeration & Air Conditioning Technology is listed only as an extra study resource, not needed if you already use Modern Refrigeration and Air Conditioning.

Prep for the South Carolina specialty contractor exam

Our exam prep course, Total Prep and complete bundle for the South Carolina specialty contractor exam. Prices are coming soon.

Books for this exam

Renewing your South Carolina specialty contractor license

You can renew without continuing education. Renewal comes every 2 years and costs $135; renewing late adds a penalty of $100 to $200.

Renewal cycle

Every 2 years

CE hours

Not required

Renewal fee

$135

Late penalty

$100–$200

Licensed in another state?

Some states have waiver agreements with South Carolina. To find out if your license counts, look at the CLB’s list of waiver agreements (PDF).

Certain states: see the CLB waiver list

We couldn’t confirm which exams are waived. When your state isn’t on the list, you apply as a new applicant and sit both exams.

City and county rules in South Carolina

The state issues your license. We couldn’t confirm local permit and business license rules, so ask the city or county where you’ll be working.

What the state handles

  • Specialty licensing and subclassifications
  • Packaged Equipment Groups and job caps
  • Exams, run by PSI
  • Renewals and disciplinary action

What cities & counties handle

  • Building permits and inspections
  • Local business licensing
  • Local contractor registration, if any

Who oversees specialty contractors in South Carolina

Licensing authority

South Carolina Contractor’s Licensing Board

803-896-4686

llr.sc.gov/clb

What the board does

  • Issues and renews contractor licenses and their subclassifications
  • Sets the financial rules and job limits for each Group
  • Reviews experience and financial paperwork
  • Keeps waiver agreements with other states

South Carolina specialty contractor license: common questions

Do I need a license to install drywall or flooring in South Carolina?

Yes. If you contract for non-structural work inside or outside a building, such as painting, cabinets, windows, drywall or flooring (carpet excluded), you need a Non-Structural Renovation license. Work on load-bearing parts isn’t covered by it.

What license do I need to install packaged HVAC units in South Carolina?

You need a Mechanical Contractor license carrying the Packaged Equipment subclassification, and you must have it before bidding on any Packaged Equipment job.

How many exams do I take for a South Carolina specialty contractor license?

Two, both given by PSI: Business & Law and the trade exam for your license.

Are the South Carolina specialty contractor exams open book?

The trade exams are, and you’re allowed to tab and highlight the approved references. Passing takes 70%.

How much experience do I need for a South Carolina Packaged Equipment license?

It has to be commercial work: two years of full-time, hands-on field experience within the past 5 years.

What are the South Carolina Packaged Equipment Group limits?

Each bid and job is capped by Group: $35,000 for Group 1, $100,000 for Group 2, $200,000 for Group 3 and $400,000 for Group 4. Group 5 has no cap.

Do South Carolina specialty contractors need continuing education?

No. You can renew either of these South Carolina licenses without continuing education.

Does an out-of-state specialty license transfer to South Carolina?

It depends on whether your state has a waiver agreement with South Carolina. Look at the CLB’s list of waiver agreements before applying.

Where this information comes from

  1. South Carolina Contractor’s Licensing Board, General information
  2. South Carolina Contractor’s Licensing Board, Home
  3. Contractor’s Licensing Board, Waiver agreements (PDF)
  4. PSI, South Carolina Contractor exams
  5. PSI, South Carolina license catalog
  6. SC Code of Regulations, Chapter 10, Reg. 10-10 Contractor’s Licensing Board fees (PDF)
  7. PSI, SC Contractor’s Licensing Board Candidate Information Bulletin (PDF)

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the South Carolina Contractor’s Licensing Board.