
Home Licenses Electrical Contractor License South Carolina
Electrical Contractor · Commercial, Groups 1–5
South Carolina Electrical Contractor License: Requirements, Exam and How to Apply
What it takes to earn a South Carolina Mechanical Contractor license with the Electrical sub-classification: choosing a Group, passing the exams and meeting the financial requirements.
Last updated October 27, 2026 from South Carolina Contractor’s Licensing Board requirements
Exam time
~7 hrs
B&L (125 min) + SC Electrical (5 hrs)
Time to get license
~2 yrs
2 years of commercial field work in the last 5
Continuing ed
Not required
Renewal has no CE requirement
Do you need a South Carolina electrical contractor license?
Yes. Before you bid on or do electrical contracting work in South Carolina, you need a Mechanical Contractor license with the Electrical sub-classification. Your license Group decides how big a bid or job you can take on.
You need the license when
- Any electrical contracting job in South Carolina, whether you bid on it or do the work, requires the license
- You put in or fix electrical systems rated up to 600 volts
- You put in outdoor and indoor lighting and the equipment that goes with it
- You put in through-the-wall or window AC units under 3 tons/3 HP that don’t need piping
Exceptions
- We couldn’t confirm any exemptions for this license
- Think your work might be exempt? Check with the CLB before you bid
What happens if you work unlicensed
We couldn’t confirm specific penalty amounts. If you contract without the proper license or go over your Group limit, the Contractor’s Licensing Board can take action, so make sure your license covers a job before you bid on it.
How to get a South Carolina electrical contractor license in 5 steps
- Choose your Group First step
Match your Group to the size of the jobs you plan to bid, from $35,000 (Group 1) up to unlimited (Group 5). - Check your experience Ahead of applying
You need 2 years of hands-on, full-time field work in the last 5 years, and it has to be commercial work. - Pass your PSI exams Ahead of applying
You need to pass Business & Law plus either the NASCLA Electrical exam or the SC Electrical exam, and have your passing scores before you apply. Book at psiexams.com or call 855-340-3701. - Get your financials ready Ahead of applying
Your Group sets a minimum net worth. Show it with the right GAAP financial statement, or put up the surety bond that goes with your Group. - Apply to the CLB Last step
Send your application for a Mechanical Contractor license with the Electrical sub-classification to the Contractor’s Licensing Board.
South Carolina electrical contractor application checklist
South Carolina’s application on one page
- A Group that fits the size of your jobs
- 2 years of commercial field work in the last 5
- A passing score on the NASCLA or SC Electrical exam
- A passing score on Business Management & Law
- A surety bond, or the GAAP financial statement your Group requires
South Carolina electrical contractor license classes
Electrical work is covered by the Mechanical Contractor license under an Electrical sub-classification. The Board divides it into 5 Groups, and your Group caps what you can take on per bid and per job.
G1 For the smallest jobs
Group 1
The Electrical sub-classification for jobs and bids up to $35,000. You can prepare your own balance sheet.
| Exam | Electrical + B&L |
| Limit | $35,000 |
G2 Financials you prepare
Group 2
Jobs and bids up to $100,000. You can prepare your own balance sheet.
| Exam | Electrical + B&L |
| Limit | $100,000 |
G3 Financials from a CPA
Group 3
Jobs and bids up to $200,000. Requires a GAAP statement compiled or prepared by a CPA/PA.
| Exam | Electrical + B&L |
| Limit | $200,000 |
G4 Financials from a CPA
Group 4
Jobs and bids up to $400,000. Requires a GAAP statement compiled or prepared by a CPA/PA.
| Exam | Electrical + B&L |
| Limit | $400,000 |
G5 For the biggest projects
Group 5
Bids and jobs of any size. Requires a statement audited by a CPA/PA.
| Exam | Electrical + B&L |
| Limit | Unlimited |
Requirements for each South Carolina electrical contractor class
Every Group has the same exam and experience requirements. The differences are your job limit and the net worth you must show (or the surety bond you can post in its place).
| Requirement | Groups 1–2 | Groups 3–4 | Group 5 |
|---|---|---|---|
| Limit for each bid and job | $35,000 / $100,000 | $200,000 / $400,000 | Unlimited |
| Financial statement needed | GAAP balance sheet you prepare | GAAP, compiled or prepared by a CPA/PA | Audited by a CPA/PA |
| Net worth | $3,500 / $10,000 | $20,000 / $40,000 | $200,000 |
| Surety bond option | $7,000 / $15,000 | $30,000 / $60,000 | $300,000 |
| Experience | 2 years of commercial work in the last 5 | 2 years of commercial work in the last 5 | 2 years of commercial work in the last 5 |
| Exams | Electrical (SC or NASCLA) + B&L | Electrical (SC or NASCLA) + B&L | Electrical (SC or NASCLA) + B&L |
The South Carolina electrical contractor exam
All applicants take Business Management & Law. For your trade exam, you pick either the NASCLA Accredited Electrical exam or the South Carolina Electrical Contractor exam. PSI gives all of them, and you can use books on each.
Format
Open book
Questions
80 or 100 + 50
Passing score
56/80 SC, 75/100 NASCLA
Exam vendor
PSI
Scoring & content
- SC Electrical: 5 hours, 80 questions, pass with 56 correct
- NASCLA Electrical: 270 minutes, 100 questions, pass with 75 correct
- Business Management & Law: 125 minutes, 50 questions, pass with 35 correct
- The SC exam covers grounding, services and feeders, low voltage, motors, fire alarm systems and signs
- You may tab and highlight your references and use them during the exam
Retaking the exam
- Wait between attempts: we couldn’t confirm it
- Retake fee: you pay the PSI exam fee again for every attempt
- You have to pass before you file your license application
- To schedule, call PSI at 855-340-3701
Books and codes for this exam (open book)
South Carolina’s electrical contractor exams are open book. You can bring the approved references below into the exam, and they can be tabbed and highlighted. The list covers the Electrical Contractor trade exam and the Commercial Business & Law exam.
| Reference | Edition | How it’s used |
|---|---|---|
| NFPA 70: National Electrical Code (NEC) | 2020 | Allowed in exam |
| American Electricians’ Handbook | 17th edition | Allowed in exam |
| Key Word Index (NEC) | 2020 | Allowed in exam |
| OSHA 1926: Construction Industry Regulations | Not stated | Allowed in exam |
| NFPA 72: National Fire Alarm and Signaling Code | 2019 | Allowed in exam |
| South Carolina 811 Excavator Manual | 2023 | Allowed in exam |
| NASCLA Contractor’s Guide to Business, Law and Project Management, Commercial Contractors (South Carolina edition) — Business & Law exam | 9th edition | Allowed in exam |
Prep for the South Carolina electrical contractor exam
Our exam prep course, Total Prep and complete bundle for the South Carolina electrical contractor exam. Prices are coming soon.
Books for this exam
-

2020 Key Word Index
Price coming soon -

American Electricians’ Handbook, 17th Edition
Price coming soon -

NFPA 70: National Electrical Code (NEC), 2020 Edition
Price coming soon -

NFPA 72: National Fire Alarm and Signaling Code, 2019 Edition
Price coming soon -

South Carolina 811 Excavator Manual, 2023
Price coming soon -

Book Tabs
Price coming soon
Renewing your South Carolina electrical contractor license
You don’t need continuing education to renew in South Carolina. Contractor licenses renew every two years for $135, with a deadline of October 31 (general contractor licenses expire in even-numbered years and mechanical licenses in odd-numbered years). Renewing late adds a penalty of $100 to $200.
Renewal cycle
Every 2 years
CE hours
Not required
Renewal fee
$135
Late penalty
$100–$200
Licensed in another state?
South Carolina has waiver agreements with certain states. The Board posts the complete list, so look it over before you apply.
States with agreements: check the CLB list
You’ll find the current list of waiver agreements on the Contractor’s Licensing Board site. We couldn’t confirm which states are included or what gets waived.
NASCLA exam: an option for the trade exam
You can take the NASCLA Accredited Electrical exam in place of South Carolina’s trade exam. Business Management & Law is still required.
City and county rules in South Carolina
The state issues your Mechanical Contractor license. Permits and inspections on each job still go through cities and counties.
The state covers
- The Electrical sub-classification and Mechanical Contractor licenses
- Financial requirements and Group limits
- Exams, given through PSI
- Waiver agreements with other states
Cities & counties cover
- Permits for electrical work
- Job-site inspections
- Local business license rules, if any
Who oversees electrical contractors in South Carolina
What the board does
- Grants Mechanical Contractor licenses with the Electrical sub-classification
- Sets the Group limits and the net worth or bond rules
- Checks experience and financial statements
- Keeps waiver agreements with other states
South Carolina electrical contractor license: common questions
Which license do South Carolina electrical contractors need?
The Contractor’s Licensing Board handles it: you apply for a Mechanical Contractor license and add the Electrical sub-classification.
What are the Group limits for a South Carolina electrical contractor license?
Per bid and per job, the limits are $35,000 for Group 1, $100,000 for Group 2, $200,000 for Group 3, $400,000 for Group 4, and no limit for Group 5.
Can I take the NASCLA exam in place of the South Carolina electrical exam?
Yes. Your choices are the NASCLA Electrical exam (100 questions, pass with 75 correct) or the SC Electrical exam (80 questions, pass with 56 correct). Business Management & Law is required for everyone.
How much experience does a South Carolina electrical contractor license take?
You need two years of hands-on, full-time field work in the last 5 years, and only commercial work counts.
Can a South Carolina electrical contractor post a surety bond in place of net worth?
Yes. Every Group allows a surety bond in its place, ranging from $7,000 for Group 1 to $300,000 for Group 5.
Does a South Carolina electrical contractor license require continuing education?
No. You don’t need CE to renew this license in South Carolina.
Do you take the South Carolina electrical contractor exam before or after applying?
Before. Your passing scores have to be in hand before you send the CLB your license application.
Where this information comes from
- South Carolina Contractor’s Licensing Board
- Contractor’s Licensing Board, Waiver Agreements (PDF)
- PSI, exam scheduling
- NASCLA Accredited Electrical Contractor Exam
- Contractor’s Licensing Board, Fees
- Contractor’s Licensing Board, General and Mechanical Contractors
- PSI, SC Commercial Contractor Candidate Information Bulletin (PDF)
Last updated October 27, 2026. Spot something out of date? Tell us.
Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the South Carolina Contractor’s Licensing Board.