Minnesota Specialty Contractor License: Requirements, Exam and How to Apply, Minnesota Specialty Contractor License, Minnesota, Manufactured Home Installer, Retake policy, Minnesota Department of Labor and Industry, Construction Codes and Licensing Division, how to get a Minnesota Specialty Contractor License, Minnesota Specialty Contractor License requirements, Minnesota Specialty Contractor License exam, Minnesota licensing board, Minnesota contractor license, license application steps, exam reference books, Manufactured Home Installer exam, Owner

Home Licenses Specialty Contractor License Minnesota

Specialty Contractor · Manufactured Home Installer

Minnesota Specialty Contractor License: Requirements, Exam and How to Apply

You need a Minnesota license to install or repair manufactured homes. Using requirements from the Minnesota Department of Labor and Industry, this guide walks through who needs one, the qualifying person, the exam, the bond and insurance, and renewal.

Last updated October 27, 2026 from Minnesota Department of Labor and Industry requirements

Exam time

5.5 hrs

Open-book Manufactured Home Installer exam

Time to get license

Varies

No minimum experience is listed; timing depends on exam approval and scheduling

Continuing ed

14 hrs

Completed by the qualifying person before every renewal

Do you need a Minnesota specialty contractor license?

It does if you install or repair manufactured homes in Minnesota. The license is issued to your business, and the business’s qualifying person has to pass the state exam.

You need the license when

  • You install manufactured homes
  • You repair manufactured homes
  • You also do prefabricated dwelling work (a residential building contractor or remodeler license may be needed as well)

Exceptions

  • People employed by a licensed manufactured home installer
  • Dealers and distributors who don’t do any installing or repairing
  • Owners working on their own property

Penalties for unlicensed work

We couldn’t confirm specific penalty amounts. The Department of Labor and Industry can look into unlicensed work and take enforcement action, so have your license in hand before you accept any installation or repair job.

How to get a Minnesota specialty contractor license in 6 steps

  1. Register the business Before you apply
    File with the Minnesota Secretary of State, or finish an assumed name verification.
  2. Name a qualifying person Before you apply
    Choose the owner, partner, CEO or managing employee who will handle the exam and continuing education. A managing employee has to work for the business on a regular basis and take an active part in its installation work.
  3. Get exam approval Before exam day
    Send in the exam application with the $50 application and exam fee. After you’re approved, call DLI at 651-284-5012 to set a date.
  4. Pass the installer exam Exam day
    You get 5.5 hours for 90 questions, the exam is open book, and a score of 70% passes.
  5. Get your bond and insurance Before you apply
    Have proof ready of a $20,000 surety bond plus $1,000,000 of liability insurance.
  6. Apply for the license After you pass
    Once you pass, a letter arrives with instructions. Send in a completed application that’s signed and notarized, along with the $180 license fee and proof of your bond and insurance.

Minnesota specialty contractor application checklist

Your Minnesota application on one page

  • Business registered with the Secretary of State
  • All owners, partners, officers and members disclosed
  • A qualifying person named
  • A passing installer exam score
  • A $20,000 surety bond and $1,000,000 in liability insurance
  • A signed, notarized application plus the $180 license fee

The Minnesota specialty contractor license

Minnesota has a single manufactured home installer license. Its scope stops at installing and repairing manufactured homes, so any other residential work calls for a different license.

MHI Specialty

Manufactured Home Installer

Limited to installing or repairing manufactured homes. Work on prefabricated dwellings may also call for a residential building contractor or remodeler license.

ExamManufactured Home Installer exam
LimitNot stated

Minnesota specialty contractor license requirements

Your business holds the license, and a single qualifying person handles the exam and the continuing education. The way your business is organized decides who can fill that role.

RequirementSole proprietorshipPartnershipCorporation
Qualifying personOwner or managing employeeGeneral partner or managing employeeCEO or managing employee
Business registrationSecretary of State / assumed nameSecretary of State / assumed nameSecretary of State / assumed name
Ownership disclosureOwnerPartnersOfficers and members
Surety bond$20,000$20,000$20,000
Liability insurance$1,000,000$1,000,000$1,000,000
ExamPassed by the qualifying personPassed by the qualifying personPassed by the qualifying person
ExperienceNot statedNot statedNot stated

The Minnesota specialty contractor exam

The qualifying person sits for a single open-book exam on federal and state installation standards. It pays to know your way around the code books.

Format

Open book

Questions

90

Passing score

70%

Exam vendor

Not stated (DLI handles scheduling)

Scoring & content

  • 90 questions in 5.5 hours; 70% passes
  • Covers federal and state standards, placement and site prep, and stabilizing systems
  • Plus multi-section connections, installing and testing site utilities, and skirting and ventilation
  • You can bring 24 CFR Parts 3280, 3282 and 3285, Minnesota Rules 1300, 1303, 1315, 1350 and 4714, and Minnesota Statutes 327B
  • You can also use the 2020 Minnesota Residential Code

Retake policy

  • After a failed attempt, wait 30 days to reapply
  • Every retake requires a fresh application and the $50 fee
  • You must be pre-approved before scheduling
  • Test sites are located in larger cities around the state

Books and codes for this exam (open book)

The Minnesota Manufactured Home Installer exam is open book. The sources we checked list the references below for the exam but don’t say which ones the state provides or lets you bring in, so check the candidate bulletin before you buy books.

ReferenceEditionHow it’s used
2020 Minnesota Residential Code2020Not stated
Minnesota Statutes chapter 327BNot statedNot stated
Minnesota Rules chapters 1300, 1303, 1315, 1350 and 4714Not statedNot stated
Code of Federal Regulations Title 24, Parts 3280, 3282 and 3285Not statedNot stated

Prep for the Minnesota specialty contractor exam

Our exam prep course, Total Prep and complete bundle for the Minnesota specialty contractor exam. Prices are coming soon.

Books for this exam

Renewing your Minnesota specialty contractor license

Before every renewal, your qualifying person has to finish 14 hours of continuing education. According to DLI’s renewal packet, a three-year license costs $185 to renew, and a $90 late fee applies when the renewal comes in after the expiration date.

Renewal cycle

3 years

CE hours

14

Renewal fee

$185

Late penalty

$90

Licensed in another state?

This license has no reciprocity agreements in Minnesota.

No reciprocity agreements

Installers from other states apply the same way new applicants do: name a qualifying person, pass the Minnesota exam, and supply the bond and insurance.

City and county rules in Minnesota

The state license lets you install anywhere in Minnesota, but each job site’s permits and inspections still go through the local government.

State handles

  • Manufactured home installer licenses
  • Approving and scheduling the exam
  • Bond and insurance rules
  • Renewal and continuing education

City & county handle

  • Permits and inspections
  • Adopting the State Building Code through local ordinance
  • Site and zoning rules

Who oversees manufactured home installers in Minnesota

Licensing authority

Minnesota Department of Labor and Industry, Construction Codes and Licensing Division

651-284-5012

dli.mn.gov construction codes and licensing

What the board does

  • Issues manufactured home installer licenses and handles renewals
  • Sets up scheduling for the installer exam
  • Sets the rules for bonds, insurance and qualifying persons
  • Oversees the continuing education needed to renew

Minnesota specialty contractor license: common questions

Do you need a Minnesota license to set up a manufactured home?

Yes, when you’re installing or repairing manufactured homes for someone else. You’re exempt if you work as an employee of a licensed installer, if you’re a dealer who never installs, or if the property is your own.

Who takes the Minnesota manufactured home installer exam?

The qualifying person for your business. That’s the owner, a general partner, the CEO, or a managing employee who works on the business’s installations on a regular basis.

Is Minnesota’s manufactured home installer exam open book?

It is. You get 5.5 hours for 90 questions, and a 70% score passes.

What bond and insurance does a Minnesota installer license require?

You need a $20,000 surety bond and $1,000,000 of liability insurance, and you send proof of both with your application.

Does the Minnesota installer license cover prefabricated homes?

Not by itself. If you also work on prefabricated dwellings, you may need a residential building contractor or remodeler license in addition to this one.

Does Minnesota have reciprocity for out-of-state installer licenses?

No. This license has no reciprocity agreements, so you go through the application and exam like any new applicant.

How much continuing education does a Minnesota installer license need?

The qualifying person completes 14 hours before every renewal.

Where this information comes from

  1. Minnesota DLI, Construction Codes and Licensing Division
  2. Minnesota Statutes chapter 327B, Manufactured Home Sales and Installation
  3. Minnesota Rules chapter 1350
  4. 24 CFR Parts 3280, 3282 and 3285 (HUD manufactured housing standards)
  5. DLI, Residential Contractor, Remodeler, Roofer, Manufactured Home Installer Exam Application (PDF)
  6. DLI, Manufactured Home Installer New License Packet (PDF)
  7. DLI, Manufactured Home Installer Renewal Packet (PDF)
  8. DLI, Contractor, roofer and remodeler exams
  9. Minnesota Statutes section 326B.092, license fees

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Minnesota Department of Labor and Industry.