South Carolina Plumbing Contractor License: Requirements, Exam and How to Apply, South Carolina Plumbing Contractor License, South Carolina, Plumbing, Group 1, Plumbing, Group 2, Plumbing, Group 3, Plumbing, Group 4, Plumbing, Group 5, South Carolina Contractor’s Licensing Board, how to get a South Carolina Plumbing Contractor License, South Carolina Plumbing Contractor License requirements, South Carolina Plumbing Contractor License exam, South Carolina licensing board, South Carolina contractor license, license application steps, exam reference books

Home Licenses Plumbing Contractor License South Carolina

Plumbing Contractor · Groups 1–5

South Carolina Plumbing Contractor License: Requirements, Exam and How to Apply

Using the South Carolina Contractor’s Licensing Board’s requirements, this guide shows you how to qualify for a Mechanical Contractor license with the Plumbing sub-classification, choose the right financial group and pass both exams.

Last updated October 27, 2026 from South Carolina Contractor’s Licensing Board requirements

Exam time

~6 hrs

Plumbing exam (4 hrs) and Business & Law (125 min)

Time to get license

~2 yrs

2 years of field work on commercial jobs within the past 5

Continuing ed

Not required

You don’t need CE to renew

Do you need a South Carolina plumbing contractor license?

You do. Before a plumbing contractor in South Carolina bids on or performs any plumbing work, the state requires a Mechanical Contractor license carrying the Plumbing sub-classification. The group on your license limits how big each bid and job can be.

You need the license when

  • As a contractor, you bid on or do plumbing work
  • You do plumbing inside private property lines
  • You install or repair appliances connected to the water supply
  • You hook waste lines up to public utilities

Exceptions

  • We couldn’t confirm any exemptions, so ask the CLB before you bid
  • If a job is over your group’s limit, you move up a group; you don’t need a separate license

What happens if you work unlicensed

The sources we checked don’t give specific penalties. As a rule, the Contractor’s Licensing Board disciplines licensees and takes action against anyone contracting without a license or bidding over their group limit.

How to get a South Carolina plumbing contractor license in 5 steps

  1. Choose your group First
    Figure out where your usual job size lands, from Group 1 ($35,000) up to Group 5 (unlimited). Then look up the net worth and type of financial statement that group calls for.
  2. Check your experience Before applying
    Commercial work is the only kind that counts. You need 2 years of it, full-time and hands-on in the field, within the past 5 years.
  3. Pass both PSI exams Before applying
    Call PSI at 855-340-3701 to book the Plumbing exam and Business Management & Law. You can’t apply in South Carolina until you have passing scores.
  4. Get your financials ready Before applying
    Have a GAAP financial statement prepared to your group’s standard, or post a surety bond in place of net worth.
  5. Apply with the CLB Last step
    Send the Contractor’s Licensing Board your application along with your financials, experience and exam scores.

South Carolina plumbing contractor application checklist

Your South Carolina application at a glance

  • A group that fits the size of your jobs
  • Proof of 2 years of commercial field work from the past 5
  • Passing scores on Plumbing and Business & Law
  • A GAAP financial statement that meets your group’s standard
  • Or a surety bond instead of net worth
  • Your application, sent to the CLB

South Carolina plumbing contractor license classes

The Plumbing sub-classification falls under the Mechanical Contractor license. All applicants sit the same exams, and your group, which depends on your finances, decides the maximum size of each bid and job.

Group 1 Smallest jobs

Plumbing, Group 1

A Mechanical Contractor license carrying the Plumbing sub-classification. You need either a $7,000 surety bond or $3,500 in net worth.

ExamPlumbing + B&L
Limit$35,000

Group 2 Small jobs

Plumbing, Group 2

A Mechanical Contractor license carrying the Plumbing sub-classification. You need either a $15,000 surety bond or $10,000 in net worth.

ExamPlumbing + B&L
Limit$100,000

Group 3 Mid-size jobs

Plumbing, Group 3

A Mechanical Contractor license carrying the Plumbing sub-classification. You need either a $30,000 surety bond or $20,000 in net worth.

ExamPlumbing + B&L
Limit$200,000

Group 4 Larger jobs

Plumbing, Group 4

A Mechanical Contractor license carrying the Plumbing sub-classification. You need either a $60,000 surety bond or $40,000 in net worth.

ExamPlumbing + B&L
Limit$400,000

Group 5 No cap

Plumbing, Group 5

A Mechanical Contractor license carrying the Plumbing sub-classification. You need either a $300,000 surety bond or $200,000 in net worth.

ExamPlumbing + B&L
LimitUnlimited

Requirements for each South Carolina plumbing contractor class

Every group takes the same exams and needs the same experience. The differences are the net worth or bond amount and how your financial statement has to be prepared.

RequirementGroups 1–2Groups 3–4Group 5
Limit for each bid and job$35,000 / $100,000$200,000 / $400,000Unlimited
Financial statementGAAP balance sheet you prepare yourselfGAAP statement compiled or prepared by a CPA/PAAudited by a CPA/PA
Net worth$3,500 / $10,000$20,000 / $40,000$200,000
Or a surety bond$7,000 / $15,000$30,000 / $60,000$300,000
Experience2 years, commercial work only2 years, commercial work only2 years, commercial work only
ExamsPlumbing + Business & LawPlumbing + Business & LawPlumbing + Business & Law

The South Carolina plumbing contractor exam

To get licensed as a plumbing contractor in South Carolina, you pass the trade exam and Business Management & Law for commercial contractors. You can use your books on both, and you have to pass before applying.

Format

Open book

Questions

80 + 50

Passing score

56 and 35 right (70%)

Exam vendor

PSI

Scoring & topics

  • Plumbing: 80 questions in 4 hours; you need 56 right to pass
  • Business & Law: 50 questions in 125 minutes; you need 35 right to pass
  • On the Plumbing exam, expect venting, drainage, backflow, storm piping, water supply, fuel gas, isometric analysis and ADA accessibility
  • On Business & Law, expect contracts, estimating, liens, taxes, labor laws, insurance and bonding, and licensing laws
  • You can tab and highlight your references

Retakes

  • We couldn’t confirm the retake rules
  • Book with PSI at 855-340-3701
  • Pass before you apply
  • You register with PSI and pay the exam fee again for every attempt

Books and codes for this exam (open book)

The South Carolina Plumbing Contractor exam and the Commercial Business & Law exam are open book, and the approved references can be tabbed, highlighted and used during the test. The list below covers both exams.

ReferenceEditionHow it’s used
International Plumbing Code (IPC)2021Allowed in exam
International Fuel Gas Code (IFGC)2021Allowed in exam
Mathematics for Plumbers and Pipefitters8th editionAllowed in exam
South Carolina Fuel Gas Code ModificationsNot statedAllowed in exam
South Carolina 811 Excavator ManualNot statedAllowed in exam
NASCLA Contractor’s Guide to Business, Law and Project Management, Commercial Contractors (South Carolina edition) — Business & Law exam9th editionAllowed in exam

The South Carolina Fuel Gas Code Modifications and the 811 Excavator Manual are free state documents you print and bring with your other references.

Prep for the South Carolina plumbing contractor exam

Our exam prep course, Total Prep and complete bundle for the South Carolina plumbing contractor exam. Prices are coming soon.

Books for this exam

Renewing your South Carolina plumbing contractor license

You can renew without continuing education. Renewal comes every 2 years and costs $135; renewing late adds a penalty of $100 to $200.

Renewal cycle

Every 2 years

CE hours

Not required

Renewal fee

$135

Late penalty

$100–$200

Licensed in another state?

Some states have waiver agreements with South Carolina. You’ll find the current ones on the Board’s list of waiver agreements.

Agreement states: see the CLB list

We couldn’t confirm which states and exams the agreements cover. Look at the Board’s waiver agreements list before applying.

Every other state: no agreement

You apply as a new applicant and pass both exams.

City and county rules in South Carolina

A CLB license lets you contract for plumbing anywhere in the state. Local building departments still handle permits and inspections.

What the state handles

  • Mechanical Contractor licensing and the Plumbing sub-classification
  • Financial groups and job caps
  • Exam rules, with testing by PSI
  • Disciplining licensees

What cities & counties handle

  • Plumbing permits
  • Inspections
  • Local business licensing

Who oversees plumbing contractors in South Carolina

Licensing authority

South Carolina Contractor’s Licensing Board

803-896-4686

llr.sc.gov/clb

What the board does

  • Issues Mechanical Contractor licenses and their sub-classifications
  • Sets the financial groups and bid limits
  • Reviews experience, exam scores and financial statements
  • Keeps waiver agreements with other states

South Carolina plumbing contractor license: common questions

What license does a plumbing contractor need in South Carolina?

The Contractor’s Licensing Board issues it: a Mechanical Contractor license that carries the Plumbing sub-classification.

What are the South Carolina plumbing contractor license groups and limits?

Each bid and job is capped by group: $35,000 for Group 1, $100,000 for Group 2, $200,000 for Group 3 and $400,000 for Group 4. Group 5 has no cap.

How much experience do I need for a South Carolina plumbing contractor license?

It has to be commercial work: two years of full-time, hands-on field experience within the past 5 years.

Is the South Carolina plumbing contractor exam open book?

Yes. You need 56 right on the 80-question plumbing exam and 35 right on the 50-question Business & Law exam.

Do I take the South Carolina plumbing exam before or after applying?

Before. You have to pass first, then send in your application.

Do South Carolina plumbing contractors need continuing education?

No. You can renew in South Carolina without any continuing education.

Does South Carolina have plumbing contractor reciprocity?

With some states, yes. The current list of waiver agreements is published by the Contractor’s Licensing Board.

Where this information comes from

  1. South Carolina Contractor’s Licensing Board
  2. Contractor’s Licensing Board, Waiver Agreements (PDF)
  3. SC Building Codes Council, Statewide Modifications incl. Fuel Gas Code (PDF)
  4. PSI, South Carolina contractor exam scheduling
  5. SC Code of Regulations, Chapter 10, Reg. 10-10 Contractor’s Licensing Board fees (PDF)
  6. PSI, SC Contractor’s Licensing Board Candidate Information Bulletin (PDF)

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the South Carolina Contractor’s Licensing Board.