Massachusetts Low Voltage License: Requirements, Exam and How to Apply, Massachusetts Low Voltage License, Massachusetts, Systems Technician, Systems Contractor, Retaking the exam, Massachusetts Board of State Examiners of Electricians, how to get a Massachusetts Low Voltage License, Massachusetts Low Voltage License requirements, Massachusetts Low Voltage License exam, Massachusetts licensing board, Massachusetts contractor license, license application steps, exam reference books, Technician exam, Parts I & II, Contractor exam, Experience, Doesn’t apply

Home Licenses Low Voltage License Massachusetts

Low Voltage Systems · Technician & Contractor

Massachusetts Low Voltage License: Requirements, Exam and How to Apply

In Massachusetts, low voltage fire warning and security work falls under two licenses: Systems Technician and Systems Contractor. Using the Board of State Examiners of Electricians’ rules, this guide explains the experience, schooling, two-part exams and added security clearance each one takes.

Last updated October 27, 2026 from Massachusetts Board of State Examiners of Electricians requirements

Exam time

5 hrs

Parts I & II of the Systems Contractor exam

Time to get license

2+ yrs

Technician takes 4,000 hrs of systems work under supervision

Continuing ed

Required

Needed ahead of every renewal; we couldn’t confirm the hours

Do you need a Massachusetts low voltage license?

It is. Before you do or contract for low voltage systems work in Massachusetts (fire alarm, security or communication systems, for example), you need a Systems Technician or Systems Contractor license. If you install security systems, you also need a separate Security Clearance Certificate.

You need the license when

  • You put in, fix or maintain fire warning or security systems
  • You do low voltage work on communication, security or fire alarm systems
  • You contract for systems work as a person, firm or corporation (Systems Contractor)
  • Your work includes security system installs. In that case the Office of Public Safety and Inspections must also issue you an S-License

Exceptions

  • Apprentices building their hours while directly supervised by a licensed Systems Contractor or Technician
  • We couldn’t confirm any other exemptions, so ask the Board before you go without a license

What happens if you work unlicensed

A systems technician has to carry the license and show it when asked, and a contractor has to post theirs at the place of business. Doing the work without the proper license violates state licensing law, and the Board can look into it and impose discipline.

How to get a Massachusetts low voltage license in 7 steps

  1. Earn your apprentice hours 2 or more years
    Put in 4,000 hours or more of systems work across two years or longer while directly supervised by a licensed Massachusetts Systems Contractor or Technician.
  2. Finish your schooling Ahead of applying
    Complete 300 hours of electrical schooling at an approved public vocational school, a licensed private occupational school or a college program the Board approves. A GED or high school diploma is also required.
  3. Send your application to the Board Ahead of the exam
    Use eLIPSE to apply to the Board of State Examiners of Electricians, including your verified schooling and job experience. It costs $31 to apply for Technician or $66 for Contractor, and you can’t test until you’re approved.
  4. Book with PSI Once you’ve applied
    Schedule through PSI’s Massachusetts exam list or by phone at 800-733-9267. You’ll find test centers in the bigger cities around the state.
  5. Pass both parts of the exam Test day
    The Technician and Contractor exams each come in two parts, and you need a 70% on both. You can use your books on either one.
  6. Get an S-License if you need one For security installers
    Installing security systems means you need a Security Clearance Certificate in addition to the license from the Board.
  7. Step up to Systems Contractor Once 1 year has passed
    When you’ve held a Technician license for a year, take 75 hours of classroom instruction and pass both parts of the Contractor exam.

Massachusetts low voltage application checklist

Massachusetts’ application on one page

  • 4,000 hrs of systems work under supervision across 2+ years
  • 300 hrs of approved electrical schooling
  • A GED or high school diploma
  • Application to the Board with your verified hours and schooling
  • Passing scores (70%) on both parts of the PSI exam
  • An S-License if you put in security systems

Massachusetts low voltage license classes

You’ll usually begin as a Systems Technician and move up to Systems Contractor once you’ve worked licensed for a year. Either one covers security and fire warning systems.

TECH Begin here

Systems Technician

An individual who works on security and fire warning systems. You have to carry the license and show it when asked.

ExamTechnician exam, Parts I & II
LimitNot stated

CONT Runs a business

Systems Contractor

A person, firm or corporation that can hire technicians and apprentices. You need a regular place of business where the license is posted.

ExamContractor exam, Parts I & II
LimitNot stated

Requirements for each Massachusetts low voltage class

To get the Technician license, you need hours and education. For the Contractor license, you need a year as a licensed Technician and more classroom time.

RequirementSystems TechnicianSystems Contractor
Experience4,000 hrs of systems work across 2 years or more, supervised by a licensed Systems Contractor or Technician1+ year holding a Massachusetts Systems Technician license while working in the trade
Credit toward experienceAs much as 2,000 hrs of electrical work (across 1 year or more); work older than 20 years doesn’t countDoesn’t apply
Education300 hrs of electrical schooling through an approved college program, private occupational school or vocational school75 hrs in the classroom
DiplomaA GED or high school diplomaNot stated
ExamParts I & II, pass with 70%Parts I & II (Business & Law), pass with 70%
Security installsAn S-License if you put in security systemsAn S-License if you put in security systems

The Massachusetts low voltage exam

For either license, PSI gives a two-part exam and you can use your books. As of July 2026, the exams follow the 2026 NEC and the 2022 edition of NFPA 72.

Format

Two parts, open book

Questions

Technician 60 + 30, Contractor 70 + 50

Passing score

70%

Exam vendor

PSI

Scoring and topics

  • Contractor Part I has 70 questions in 180 minutes on electrical theory, fire and intrusion detection, and NEC alarm rules
  • Contractor Part II (Business & Law) has 50 questions in 120 minutes
  • Technician: Part I has 60 questions, and Part II has 30 questions in 60 minutes on licensing laws, testing, schematics and circuit calculations
  • You’ll use MGL Chapter 141, the Massachusetts Electrical Code (527 CMR 12.00), NFPA 72 (2022) and the 2026 NEC. The Contractor exam also uses a NASCLA business and law guide
  • You can tab and highlight approved books

Retaking the exam

  • You only pay for the part you take again: $80 to retake the trade portion and $55 to retake the business/practical portion
  • Book with PSI online or by calling 800-733-9267
  • The Board has to approve you before you can test
  • After licensure approval, the last fee goes through eLIPSE: Technician costs $104 and Contractor costs $155

Books and codes for this exam (open book)

The Massachusetts Systems Technician and Systems Contractor exams are open book, and the permitted references can be tabbed and highlighted. Both exams use the NEC and NFPA 72; the Systems Contractor exam adds the business and law references, and the state code and law documents are free to print and bring in.

ReferenceEditionHow it’s used
NFPA 70: National Electrical Code (NEC)2026Allowed in exam
NFPA 72: National Fire Alarm and Signaling Code2022Allowed in exam
Massachusetts Electrical Code, 527 CMR 12.00 (state amendments to the NEC) — Systems Contractor examNot statedAllowed in exam
NASCLA Contractor’s Guide to Business, Law and Project Management, Basic Edition — Systems Contractor examNot statedAllowed in exam
237 CMR 12.00–23.00: Insurance Requirements for Limited Liability Corporations and Limited Liability Partnerships — Systems Contractor examNot statedAllowed in exam
Massachusetts General Laws Chapter 141: Supervision of Electricians — Systems Contractor examNot statedAllowed in exam
Massachusetts General Laws Chapter 143, Sections 3L, 3P and 50 — Systems Contractor examNot statedAllowed in exam
Massachusetts General Laws Chapter 254 (selected sections) — Systems Contractor examNot statedAllowed in exam
Massachusetts General Laws Chapter 151: Minimum Fair Wages (selected sections) — Systems Contractor examNot statedAllowed in exam
Massachusetts General Laws Chapter 152 (selected sections) — Systems Contractor examNot statedAllowed in exam
Massachusetts State Unemployment Law (Employer Handbook) — Systems Contractor examNot statedAllowed in exam
Ugly’s Electrical References2026Study only
American Electricians’ Handbook17th editionStudy only
Fire Alarm Signaling Systems HandbookNot statedStudy only
Certified Alarm Technicians Manual, Level 12001Study only
Understanding and Servicing Alarm Systems3rd editionStudy only

Both exams move to the 2026 NEC and the 2022 NFPA 72 as of July 2026. The last five books are not allowed in the exam room.

Prep for the Massachusetts low voltage exam

Our exam prep course, Total Prep and complete bundle for the Massachusetts low voltage exam. Prices are coming soon.

Books for this exam

Renewing your Massachusetts low voltage license

Every systems license expires on July 31, and you can renew in eLIPSE as early as 90 days ahead. It costs $78 for a Systems Technician and $117 for a Systems Contractor, and your continuing education has to be done beforehand.

Renewal cycle

Not stated

CE hours

Required (we couldn’t confirm the hours)

Renewal fee

$78 for technician; $117 for contractor

Late penalty

Not stated

Licensed in another state?

Massachusetts has reciprocity with five states. We couldn’t confirm which exams or license levels each agreement includes, so check with the Board before applying.

Maine: reciprocity in place

Ask the Board which systems licenses count and what you’ll still have to send in.

New Hampshire: reciprocity in place

Ask the Board which systems licenses count and what you’ll still have to send in.

Vermont: reciprocity in place

Ask the Board which systems licenses count and what you’ll still have to send in.

Washington: reciprocity in place

Ask the Board which systems licenses count and what you’ll still have to send in.

Oregon: reciprocity in place

Ask the Board which systems licenses count and what you’ll still have to send in.

Every other state: no agreement

You apply like a new applicant with verified hours and schooling, and you pass both parts of the exam.

City and county rules in Massachusetts

The state issues systems licenses, and they’re good anywhere in Massachusetts. Each job’s permits and inspections still go through the city or town.

The state handles

  • Systems Technician and Systems Contractor licensing
  • Approving exam candidates, with testing run by PSI
  • Security Clearance Certificates (the S-License)
  • The state electrical code (527 CMR 12.00)

Cities and counties handle

  • Inspections and permits when required
  • Enforcing local codes

Massachusetts’ systems licensing board

Licensing authority

Massachusetts Board of State Examiners of Electricians

617-727-9931

mass.gov/orgs/board-of-state-examiners-of-electricians

What the board does

  • Licenses Systems Technicians and Systems Contractors
  • Checks your experience and schooling before approving you to test
  • Sets the CE rules for renewal
  • Disciplines license holders

Massachusetts low voltage license: common questions

Do you need a license for low voltage work in Massachusetts?

You do. Doing or contracting for fire alarm, security or communication systems work takes a Systems Technician or Systems Contractor license.

What’s the difference between a Massachusetts Systems Technician and Systems Contractor license?

The Technician license is for one person doing the work. The Contractor license lets you run a firm with technicians and apprentices on staff, as long as you keep a place of business and post the license there.

How many hours does a Massachusetts Systems Technician license take?

You need 4,000 hours or more of supervised systems work across two years or longer, 300 hours of electrical schooling and a GED or high school diploma. As much as 2,000 hours of electrical work can count toward it.

How do you qualify for the Massachusetts Systems Contractor exam?

You need to have held a Massachusetts Systems Technician license for one year or more while working in the field, and you need 75 hours of classroom instruction.

Can you use books on the Massachusetts low voltage license exam?

You can. PSI gives both two-part exams, books are allowed, and a 70% passes. As of July 2026 they follow the 2026 NEC and the 2022 NFPA 72.

Do you need an S-License for low voltage work in Massachusetts?

You do if you put in security systems. The Office of Public Safety and Inspections issues this Security Clearance Certificate, and it’s separate from the license you get from the Board.

Does Massachusetts offer low voltage license reciprocity?

It does, with Maine, New Hampshire, Vermont, Washington and Oregon. Ask the Board which licenses fall under each agreement.

Where this information comes from

  1. Massachusetts Board of State Examiners of Electricians
  2. Mass.gov, Apply for or renew a Certificate of Clearance (S-License)
  3. PSI, Massachusetts exam catalog
  4. Massachusetts Electrical Code, 527 CMR 12.00
  5. 237 CMR 23.00, Insurance requirements for LLCs and LLPs
  6. MGL Chapter 141, Supervision of Electricians
  7. Mass.gov, Apply for an individual electrical or systems license
  8. Mass.gov, Renew your electrician, systems technician, or systems contractor license

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Massachusetts Board of State Examiners of Electricians.