Massachusetts Gas Fitter License: Requirements, Exam and How to Apply, Massachusetts Gas Fitter License, Massachusetts, LP Gas Installer, Journeyman Gas Fitter, Master Gas Fitter, Retaking the exam, Massachusetts Board of Registration of Plumbers and Gas Fitters, how to get a Massachusetts Gas Fitter License, Massachusetts Gas Fitter License requirements, Massachusetts Gas Fitter License exam, Massachusetts licensing board, Massachusetts contractor license, license application steps, exam reference books, Part I and Part II, Education, Classroom hours

Home Licenses Gas Fitter License Massachusetts

Gas Fitter · LP, Journeyman & Master

Massachusetts Gas Fitter License: Requirements, Exam and How to Apply

A look at the three gas fitter levels in Massachusetts: how many classroom and work hours each requires, what to expect from the closed-book PSI exams, and how you apply through eLIPSE.

Last updated October 27, 2026 from Massachusetts Board of State Examiners of Plumbers and Gas Fitters requirements

Exam time

160 min

Both parts of the LP Gas Installer exam

Time to get license

Varies

Anywhere from 3,400 to 5,100 hours on the job, plus classroom time

Continuing ed

Required

6 hrs ahead of every renewal

Do you need a Massachusetts gas fitter license?

It is. In Massachusetts, any gas fitting that’s subject to inspection takes a gas fitter license, and you need to be licensed before you bid on or contract for gas fitting. You can be licensed as an LP Gas Installer, a Journeyman or a Master.

You need the license when

  • Plumbing and gas fitting of any kind that’s subject to inspection
  • Submitting bids or signing contracts for gas fitting
  • As an LP Gas Installer, setting up and relocating LP gas space heaters and salamanders on job sites where the building isn’t finished yet
  • Operating a gas fitting business that employs journeymen (Master)

Exceptions

  • Apprentices who are finishing the schooling and work hours they need for a license
  • Work that state law or regulation doesn’t subject to inspection

What happens if you work unlicensed

If you do gas fitting without a license, the Board can discipline you and take enforcement action. The rules come from Chapter 142 of the Massachusetts General Laws. Ask the Board what the penalties are today.

How to get a Massachusetts gas fitter license in 6 steps

  1. Finish your classroom hours Ahead of applying
    Your classroom time depends on the level: LP Gas Installer takes 220 hours and Journeyman takes 300. Master takes 110 hours of Tier 3 training.
  2. Build your work hours Ahead of applying
    You need 3,400 hours as an LP Gas Installer or 5,100 for Journeyman.
  3. Send in your application Ahead of the exam
    Submit your application to the Board along with verified schooling and experience. You’ll find the details on the state’s licensing page.
  4. Book with PSI Once approved
    Call PSI at 855-834-8745 or go to its booking page to pick a date.
  5. Pass both parts of the exam Test day
    At every level, the exam comes in two parts and you can’t use books. A score of 70% or better passes.
  6. Pay for your license Once you pass
    Once both parts are behind you, the last step is the license fee: $52 for LP installer or journeyman and $97 for master. Look for the new license in your eLIPSE profile after that.

Massachusetts gas fitter application checklist

Massachusetts’ application on one page

  • A GED or high school diploma
  • The classroom hours for your level (220, 300 or 110 Tier 3)
  • Verified hours on the job (3,400 or 5,100)
  • A CORI background check (journeyman)
  • Approved application, then a scheduled PSI exam
  • Your PASS letter uploaded to eLIPSE

Massachusetts gas fitter license classes

There are three levels of gas fitter license in Massachusetts. For each one, you take a PSI exam in two parts and need a 70% to pass.

LP Limited scope

LP Gas Installer

Puts in, hooks up and relocates undiluted LP gas salamanders, space heaters and similar equipment in buildings that are still being built.

ExamPart I and Part II
LimitNot stated

JRY Most popular

Journeyman Gas Fitter

Handles plumbing and gas fitting that state law and regulation subject to inspection.

ExamPart I and Part II
LimitNot stated

MST Owns the business

Master Gas Fitter

Runs a business from a regular location and handles gas fitting, either in person or by sending out the journeyman gas fitters it employs.

ExamPart I and Part II
LimitNot stated

Requirements for each Massachusetts gas fitter class

At every level, you need classroom hours, hours on the job and a passing exam score. Before you can test, your application has to show verified schooling and experience.

RequirementLP Gas InstallerJourneymanMaster
EducationA GED or high school diplomaA GED or high school diplomaA GED or high school diploma
Classroom hours220 hrs300 hrs of education as an apprentice110 hrs of third-year Tier 3 training
Job experience3,400 hrs5,100 hrsNot stated
Background checkNot statedA CORI checkNot stated
OtherNoneNoneA Statement of Experience form showing your journeyman license number
ExamParts I & II, pass with 70%Parts I & II, pass with 70%Parts I & II, pass with 70%

The Massachusetts gas fitter exam

Each gas fitter exam in Massachusetts is split into two parts, and you can’t bring books. Part II is hands-on, covering venting and piping.

Format

2 parts, closed book

Questions

50 + 15 (LP installer)

Passing score

70%

Exam vendor

PSI

Scoring and topics

  • LP Gas Installer Part I: you get 100 minutes for 50 questions on venting, appliances, piping and regulations
  • LP Gas Installer Part II (practical): you get 60 minutes for 15 questions on venting and piping
  • Journeyman: 120 minutes for 60 questions, then an 80-minute practical with 20 questions on combustion air, venting and piping
  • Based on 248 CMR, which includes the Massachusetts Fuel Gas Code and the state’s changes to NFPA 54 and NFPA 58

Retaking the exam

  • You only retake the part you didn’t pass, and it costs $80, which is what the first try cost
  • The state has to approve you before you can book
  • You’ll find test centers in the bigger cities across Massachusetts

Books and codes for this exam (closed book)

The Massachusetts gas fitter exams are closed book, so you can’t bring references into the exam. Use the books below to study.

ReferenceEditionHow it’s used
Massachusetts Plumbing and Gas Code, 248 CMR (Sections 3.00–7.00 and 11.00, including the Massachusetts Fuel Gas Code)Sections dated 2010–2014Study only
NFPA 54: National Fuel Gas Code2012Study only
NFPA 58: Liquefied Petroleum Gas Code2011Study only
Massachusetts Dig Safe Rules, 220 CMR 99.00Not statedStudy only
Massachusetts General Laws Chapter 142: Supervision of PlumbingNot statedStudy only

Prep for the Massachusetts gas fitter exam

Our exam prep course and complete bundle for the Massachusetts gas fitter exam. Prices are coming soon.

Books for this exam

Renewing your Massachusetts gas fitter license

You have to finish 6 hours of continuing education ahead of every renewal. Renewing costs $66 for an LP installer, $52 for a journeyman and $97 for a master, and there’s a $57 late fee if it comes in after May 1.

Renewal cycle

Not stated

CE hours

6

Renewal fee

$66 for LP installer; $52 for journeyman; $97 for master

Late penalty

$57 if after May 1

Massachusetts gas fitter CE

Hours, deadlines, required topics and the renewal steps, in one guide.

Licensed in another state?

Massachusetts has reciprocity with five states. Ask the Board what each agreement includes.

Maine: reciprocity in place

We couldn’t confirm the details, so ask the Board.

New Hampshire: reciprocity in place

We couldn’t confirm the details, so ask the Board.

Vermont: reciprocity in place

We couldn’t confirm the details, so ask the Board.

Washington: reciprocity in place

We couldn’t confirm the details, so ask the Board.

Oregon: reciprocity in place

We couldn’t confirm the details, so ask the Board.

City and county rules in Massachusetts

Gas fitters across Massachusetts are licensed by the Board. Permits and inspections for gas work go through local inspectors.

The state handles

  • Licensing for LP Gas Installers, Journeymen and Masters
  • Reviewing applications and approving exam candidates
  • CE required for renewal

Cities and counties handle

  • Permits for gas work
  • Gas work inspections

Massachusetts’ gas fitter licensing board

Licensing authority

Massachusetts Board of State Examiners of Plumbers and Gas Fitters

617-701-8727

mass.gov/plumber-licensing

What the board does

  • Licenses LP Gas Installers, Journeymen and Master Gas Fitters
  • Checks your schooling and experience before approving you to test
  • Sets the CE rules for renewal
  • Enforces MGL Chapter 142 and 248 CMR

Massachusetts gas fitter license: common questions

How many hours does a Massachusetts journeyman gas fitter license take?

You need 5,100 hours on the job and 300 hours of education as an apprentice. You also need to clear a CORI background check and pass the exam.

Can you use books on the Massachusetts gas fitter exam?

You can’t. Every exam is closed book and comes in two parts, and you need a 70% or better to pass.

What is a Massachusetts LP Gas Installer license?

It lets you put in and relocate LP gas salamanders, space heaters and similar equipment in buildings still under construction. You need 220 hours in the classroom and 3,400 hours on the job.

How do you get your Massachusetts gas fitter license after passing the exam?

After you pass both parts, pay the license fee ($52 for LP installer or journeyman, $97 for master). Your license will then appear in your eLIPSE profile.

Do Massachusetts gas fitters need CE to renew?

They do. If you hold a journeyman, master or LP installer license, you finish 6 hours of continuing education ahead of every renewal.

Which states have gas fitter license reciprocity with Massachusetts?

There are five: Oregon, Washington, Vermont, New Hampshire and Maine. The Board can tell you what each one includes.

Where this information comes from

  1. Massachusetts Board of State Examiners of Plumbers and Gas Fitters, Plumber and gas fitter licensing
  2. PSI, Massachusetts plumbing and gas fitting exams
  3. MGL Chapter 142, Supervision of Plumbing
  4. 248 CMR, Massachusetts Fuel Gas Code and amendments to NFPA 54 and NFPA 58
  5. 220 CMR 99.00, Massachusetts Dig Safe rules
  6. Mass.gov, Apply for a Journeyman Gas Fitter license
  7. Mass.gov, Apply for a Master Gas Fitter license
  8. Mass.gov, Apply for a Liquefied Petroleum (LP) Installer license
  9. Mass.gov, Renew a plumber, gas fitter, or liquified petroleum installer license
  10. PSI, Massachusetts Plumbers & Gas Fitters candidate bulletin (10/3/2025)

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Massachusetts Board of State Examiners of Plumbers and Gas Fitters.