Utah Code Official License: Requirements, Exam and How to Apply, Utah Code Official License, Utah, Limited Inspector, Combination Inspector, Retake policy, Utah Division of Professional Licensing, how to get a Utah Code Official License, Utah Code Official License requirements, Utah Code Official License exam, Utah licensing board, Utah contractor license, license application steps, exam reference books, One or more ICC exams, ICC Combination, All four trades, Qualifying Questionnaire, Supporting documents for each “yes” answer, Certifications

Home Licenses Code Official License Utah

Building Inspector · Limited & Combination

Utah Code Official License: Requirements, Exam and How to Apply

The Division of Professional Licensing (DOPL) licenses Utah’s building, electrical, plumbing and mechanical inspectors. You won’t take a separate state exam. ICC certifications are what qualify you.

Last updated October 28, 2026 from Utah Division of Professional Licensing requirements

Exam time

Varies

Each ICC certification exam sets its own

Time to get license

Varies

Varies with the number of ICC certifications you need

Continuing ed

Not stated

Ask DOPL when you renew

Do you need a Utah code official license?

It is if you inspect construction in Utah for a local regulator, a state regulator or a compliance agency. You’ll need an inspector license from DOPL, supported by ICC certifications.

You need the license when

  • You inspect building, plumbing, electrical or mechanical work
  • You compare installations, repairs, remodels, alterations or new construction to the state codes adopted under Title 15A
  • Your employer is a local regulator, a state regulator or a compliance agency
  • You act on the results of your inspections

Exceptions

  • Jobs that aren’t inspection, like clerical or permit counter work
  • Inspections that aren’t for a regulator or a compliance agency

Inspecting without a license

DOPL is Utah’s licensing body for inspectors. If you break the rules, it can discipline you, up to denying, suspending or revoking your license. Make sure your license is in place before you do any inspections.

How to get a Utah code official license in 5 steps

  1. Pick your license Before you start
    Go with a limited license for one trade or a few, or a combination license to cover all four.
  2. Get certified Exam day
    Which ICC exams you take depends on the trade. For building it’s B1 or B2, for electrical E1 or E2, for plumbing P1 or P2, and for mechanical M1 or M2.
  3. Complete the Qualifying Questionnaire Before you apply
    If you answer “yes” to anything, pull together the documents that back it up.
  4. Apply to DOPL Application
    Send in the application, the fee and copies of your certifications. You can call DOPL at 801-530-6628 or begin at dopl.utah.gov/building-inspector.
  5. Get licensed After approval
    When DOPL approves you, you’re cleared to inspect in whichever trades your license covers.

Utah code official application checklist

Your one-page Utah checklist

  • Picked limited or combination
  • Copies of current ICC (or IAEI or AWS) certifications
  • Completed the Qualifying Questionnaire
  • Supporting documents for each “yes” answer
  • Sent the application and fee to DOPL

Utah code official license classes

You can hold one of two inspector licenses in Utah. The limited license covers only the trades you’re certified in, and the combination license covers all four.

LTD Single trade

Limited Inspector

Inspects only in the areas your ICC (or IAEI or AWS) certifications cover, for example just building or just plumbing.

ExamOne or more ICC exams
LimitThe trades you hold certifications in

COMBO All trades

Combination Inspector

Covers building, electrical, plumbing and mechanical inspections.

ExamICC Combination, or all four trade certifications
LimitAll four trades

Requirements for each Utah code official class

You apply for either license the same way. What changes is the set of certifications you submit.

RequirementLimited InspectorCombination Inspector
Qualifying QuestionnaireSupporting documents for each “yes” answerSupporting documents for each “yes” answer
CertificationsOne or more accepted ICC, IAEI or AWS inspector certificationsICC Combination Inspector, or separate building, electrical, plumbing and mechanical certifications
Electrical optionIAEI General Electrical or ICC Electrical InspectorIAEI General Electrical or ICC Electrical Inspector
State examOnly the certification examsOnly the certification exams
ExperienceNot statedNot stated

The Utah code official exam

There’s no Utah inspector exam. You qualify through ICC certifications instead, and you take a separate exam for each one.

Format

ICC certification exams

Questions

Not stated

Passing score

Not stated

Exam vendor

ICC

Scoring & content

  • Commercial: B2 Building, E2 Electrical, P2 Plumbing, M2 Mechanical
  • Residential: B1 Building, E1 Electrical, P1 Plumbing, M1 Mechanical
  • The C8 Combination Inspector certification qualifies you for the combination license
  • For a limited license, IAEI General Electrical and AWS Certified Welding Inspector are accepted too

Retake policy

  • Each certifying body sets its own retake rules
  • We couldn’t confirm any retake rules specific to Utah
  • Questions? Call DOPL at 801-530-6628

Books and codes for this exam (open book)

ICC exams are open book: you can bring bound, published copies of the listed references, but not study guides or practice questions. Which books you need depends on the ICC exams you take, and the code year you register for sets the edition.

ReferenceEditionHow it’s used
International Residential Code (IRC)2021 or 2024 (candidate picks the code year)Allowed in exam
International Building Code (IBC)2021 or 2024 (candidate picks the code year)Allowed in exam
Concrete Manual: Concrete Quality and Field Practices (2024/2021 IBC and ACI 318-19), or ACI 318-19 instead; only one of the two is needed2024/2021 IBC and ACI 318-19 editionAllowed in exam
ACI 318-19 Building Code Requirements for Structural Concrete and Commentary (alternative to the Concrete Manual)2019Allowed in exam
NFPA 70 National Electrical Code (NEC), or Ugly’s Electrical References (any edition) instead2020 (2021 exam) or 2023 (2024 exam)Allowed in exam
NFPA 70 National Electrical Code (NEC)2020 or 2023 (candidate picks the code year)Allowed in exam
Ugly’s Electrical ReferencesAny editionAllowed in exam
International Mechanical Code (IMC)2021 or 2024 (candidate picks the code year)Allowed in exam
International Fuel Gas Code (IFGC)2021 or 2024 (candidate picks the code year)Allowed in exam
International Plumbing Code (IPC)2021 or 2024 (candidate picks the code year)Allowed in exam
ICC A117.1 Accessible and Usable Buildings and Facilities2017Allowed in exam

Prep for the Utah code official exam

Our exam prep course, Total Prep and complete bundle for the Utah code official exam. Prices are coming soon.

Books for this exam

Renewing your Utah code official license

We couldn’t confirm Utah’s renewal cycle, renewal fee or continuing education rules for inspectors. Ask DOPL before your license runs out, and don’t let your ICC certifications lapse.

Renewal cycle

Not stated

CE hours

Not stated

Renewal fee

Not stated

Late penalty

Not stated

Licensed in another state?

Because Utah bases its inspector licenses on national certifications, ICC certifications you’ve already earned can count toward your Utah license.

No reciprocity deals

We couldn’t confirm any state-to-state agreements. Apply to DOPL as a new applicant and include copies of the certifications you currently hold.

City and county rules in Utah

Inspector licensing happens at the state level through DOPL. The hiring, along with local inspection work under the state codes, falls to cities, counties and other agencies.

State handles

  • Issuing limited and combination inspector licenses
  • Setting which certifications qualify
  • Reviewing applications and the Qualifying Questionnaire

Handled by cities & counties

  • Employing building inspectors
  • Issuing permits and doing inspections
  • Enforcing the state construction codes on local jobs

Who oversees Utah building inspectors

Licensing authority

Utah Division of Professional Licensing

801-530-6628

dopl.utah.gov/building-inspector

What the board does

  • Grants limited and combination inspector licenses
  • Decides which ICC, IAEI and AWS certifications count
  • Reviews applications and answers to the Qualifying Questionnaire

Utah code official license: common questions

Is there a state exam for a Utah building inspector license?

No. Utah grants inspector licenses on the strength of ICC certifications (some limited licenses also accept IAEI or AWS), and you take a separate exam for each.

How does a limited inspector license differ from a combination license in Utah?

With a limited license you inspect only the trades you’re certified in. With a combination license you inspect building, electrical, plumbing and mechanical work.

What ICC certifications qualify you for a Utah combination inspector license?

Either the ICC Combination Inspector certification (C8) or individual inspector certifications in building, electrical, plumbing and mechanical.

Does Utah accept an IAEI certification for an inspector license?

It does. You can use IAEI General Electrical in place of the ICC electrical inspector certification.

Who issues building inspector licenses in Utah?

DOPL, the Utah Division of Professional Licensing, issues them. Their number is 801-530-6628.

What is the Utah inspector Qualifying Questionnaire?

It’s a section of the DOPL application. Any “yes” answer needs supporting documents attached.

Where this information comes from

  1. Utah Division of Professional Licensing, Building Inspector
  2. International Code Council (ICC), inspector certifications
  3. Utah Code Title 15A, State Construction and Fire Codes Act

Last updated October 28, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Utah Division of Professional Licensing.