Utah HVAC Contractor License: Requirements, Exam and How to Apply, Utah HVAC Contractor License, Utah, HVAC Qualifier, HVAC Contractor, Utah Division of Occupational and Professional Licensing (DOPL), how to get a Utah HVAC Contractor License, Utah HVAC Contractor License requirements, Utah HVAC Contractor License exam, Utah licensing board, Utah contractor license, license application steps, exam reference books, B&L + Utah HVAC, Experience, Employers that count, How much must be HVAC, Proving your experience, Tax records, Pre-licensing course

Home Licenses HVAC Contractor License Utah

HVAC Contractor · H100 HVAC Qualifier

Utah HVAC Contractor License: Requirements, Exam and How to Apply

In Utah, HVAC contractors are licensed under the H100 HVAC Qualifier classification. Here you’ll find the Division of Occupational and Professional Licensing’s rules on experience, the pre-licensing course, exams and renewal.

Last updated October 27, 2026 from Utah Division of Occupational and Professional Licensing requirements

Exam time

2+ hrs

120 minutes for Business & Law; the HVAC exam’s time limit isn’t published

Time to get license

4,000 hrs

HVAC experience that counts, earned inside a 5-year window

Continuing ed

6 hrs

Due each licensing period, before you renew

Do you need a Utah HVAC contractor license?

You do if you’re a contractor who performs or superintends HVAC work in Utah. The H100 HVAC Qualifier classification covers full warm air heating, air conditioning and ventilating systems, along with refrigeration equipment.

You need the license when

  • You build or install complete warm air heating systems
  • You put in air conditioning or ventilating systems
  • Your jobs include refrigeration equipment, whether that’s a built-in refrigerator, a refrigerated room or an insulated refrigerated space
  • You oversee any of this work for someone else

Exceptions

  • Employees of a licensed H100, B100, S350, P200 or P201 contractor don’t need their own license; that job is where you earn qualifying hours
  • The sources we checked don’t list any other exemptions, so confirm with DOPL before you count on one

What happens if you work unlicensed

We couldn’t confirm specific penalty amounts. DOPL can discipline or act against anyone contracting without the license they need, so get licensed before you bid on or start a job.

How to get a Utah HVAC contractor license in 6 steps

  1. Build your HVAC hours Before you apply
    Work 4,000 hours within 5 years for licensed H100, B100, S350, P200 or P201 contractors. At least 90% of those hours need to be HVAC work.
  2. Pull together your proof Before you apply
    Gather tax records or affidavits from the contractors or supervisors you worked under, or write a sworn attestation.
  3. Take the 25-hour course Before you apply
    Complete an approved 25-hour pre-licensing course, and hold on to your certificate of completion.
  4. Get pre-approved, then book with Prov Before exam day
    The testing agency has to pre-approve you before you can schedule. Then book at provexam.com.
  5. Pass both tests Exam day
    You need 42 of 60 correct on the open-book Business & Law exam and 70% on the Utah HVAC exam.
  6. Apply with DOPL
    Send the Division of Occupational and Professional Licensing your application along with your course certificate, exam results and proof of experience.

Utah HVAC contractor application checklist

Utah’s application on one page

  • Earn 4,000 HVAC hours within 5 years
  • Prove your hours with tax records, affidavits or a sworn attestation
  • Get your 25-hour pre-licensing course certificate
  • Get pre-approved by the testing agency
  • Pass Business & Law and the Utah HVAC exam
  • Submit your application to DOPL

Utah HVAC contractor license classes

Contractors in Utah can hold many different classifications. If your work is HVAC, the one you want is the H100 HVAC Qualifier, which replaced what used to be the S350 HVAC Contractor classification.

H100 Current class

HVAC Qualifier

Lets you perform or oversee the fabrication and installation of full warm air heating, air conditioning and ventilating systems, refrigeration equipment included.

ExamB&L + Utah HVAC
LimitNot stated

S350 Former name

HVAC Contractor

Utah updated the old S350 HVAC Contractor classification to the H100 HVAC Qualifier license.

ExamSee H100
LimitNot stated

Requirements for each Utah HVAC contractor class

Each H100 applicant needs three things: verified experience, a 25-hour pre-licensing course and passing results on two exams.

RequirementH100 HVAC Qualifier
Experience4,000 hours, earned within 5 years at most
Employers that countH100, B100, S350, P200 or P201 licensed contractors
How much must be HVAC90% or more tied directly to HVAC
Proving your experienceTax records, affidavits from contractors or supervisors, or a sworn attestation
Pre-licensing courseAn approved 25-hour course and its certificate of completion
ExamsBusiness & Law plus Utah HVAC
Minimum ageNot stated

The Utah HVAC contractor exam

You’ll sit for two exams as an H100 applicant: Business & Law and Utah HVAC. You can bring your approved references to both, tabbed and highlighted.

Format

Open book

Questions

60 + 110

Passing score

42 of 60 · 70%

Exam vendor

Prov

Scoring and topics

  • Business & Law: 120 minutes for 60 questions; 42 correct passes
  • Utah HVAC: 110 questions; 70% passes
  • B&L covers estimating, contracts, safety, and lien, labor and tax laws
  • HVAC covers systems and sizing, refrigeration, piping, electrical, math and reading plans
  • You can tab and highlight your references

Retakes

  • We couldn’t confirm the retake rules
  • You need testing agency pre-approval before you schedule
  • Ask Prov about current retake rules before you book again

Books and codes for this exam (open book)

Utah’s H100 exams are open book, and the approved references can be tabbed, highlighted and used during the test. The list covers the Utah HVAC exam and the Business and Law exam.

ReferenceEditionHow it’s used
International Mechanical Code (IMC) — HVAC exam2024Allowed in exam
International Fuel Gas Code (IFGC) — HVAC exam2024Allowed in exam
International Residential Code (IRC) — HVAC exam2024Allowed in exam
ACCA Manual J: Residential Load Calculation — HVAC exam8th editionAllowed in exam
ACCA Manual D: Residential Duct Systems — HVAC exam3rd editionAllowed in exam
ACCA Manual S: Residential Equipment Selection — HVAC examNot statedAllowed in exam
Modern Refrigeration and Air Conditioning — HVAC exam22nd editionAllowed in exam
Utah Amendments to the International Mechanical Code — HVAC exam2015Allowed in exam
Utah Amendments to the International Fuel Gas Code — HVAC exam2015Allowed in exam
Division of Occupational and Professional Licensing Act, Utah Code Title 58, Chapter 1 — HVAC examNot statedAllowed in exam
General Rules of the Division of Occupational and Professional Licensing, R156-1 — HVAC examNot statedAllowed in exam
NASCLA Contractor’s Guide to Business, Law and Project Management (Utah edition) — Business and Law exam4th editionAllowed in exam

An ACCA duct calculation slide rule is also listed among the HVAC exam materials.

Prep for the Utah HVAC contractor exam

Our exam prep course, Total Prep and complete bundle for the Utah HVAC contractor exam. Prices are coming soon.

Books for this exam

Renewing your Utah HVAC contractor license

Before you renew, finish 6 hours of continuing education for the licensing period. Utah contractor licenses expire November 30 in odd years, and renewing costs $129.

Renewal cycle

Every 2 years, on Nov 30 of odd years

CE hours

6

Renewal fee

$129

Late penalty

+$20 up to 30 days late; +$50 past 30 days

Utah HVAC contractor CE

Hours, deadlines, required topics and the renewal steps, in one guide.

Licensed in another state?

Utah doesn’t have reciprocity agreements for this license.

No reciprocity with any state

Already licensed somewhere else? You still apply as a new applicant and meet Utah’s experience, course and exam rules.

City and county rules in Utah

The state issues your H100 license. Permits and inspections for each job still go through the local building department.

What the state handles

  • H100 HVAC Qualifier licenses (DOPL)
  • Experience and pre-licensing course rules
  • Exams (Prov)
  • CE and renewal

What cities & counties handle

  • Mechanical permits, job by job
  • Inspections
  • Local business licensing

Who oversees Utah HVAC contractors

Licensing authority

Utah Division of Occupational and Professional Licensing (DOPL)

801-530-6628

commerce.utah.gov/dopl

What the board does

  • Issues contractor licenses, including the H100 HVAC Qualifier, and handles renewals
  • Sets H100 experience rules under Utah Admin. Code R156-55a
  • Requires 6 hours of CE every licensing period
  • Runs the Division of Occupational and Professional Licensing Act (Utah Code 58-1)

Utah HVAC contractor license: common questions

What license do you need for HVAC work in Utah?

It’s called the H100 HVAC Qualifier. With it, you can work on complete warm air heating, air conditioning and ventilating systems, and on refrigeration equipment too.

What happened to Utah’s S350 HVAC license?

Utah updated the S350 HVAC Contractor classification to the H100 HVAC Qualifier license.

How much experience do you need for a Utah HVAC license?

You need 4,000 hours, earned in no more than 5 years, working for licensed H100, B100, S350, P200 or P201 contractors. HVAC has to make up at least 90% of it.

Is the Utah HVAC exam open book?

It is. Business & Law and Utah HVAC are both open book, and you’re allowed to tab and highlight your references.

What score do you need to pass the Utah HVAC exams?

On Business & Law, 42 of 60 correct. On the 110-question Utah HVAC exam, 70%.

Do you need a pre-licensing course for a Utah HVAC license?

You do. You’ll need a certificate of completion from an approved 25-hour pre-licensing course.

Does Utah accept HVAC licenses from other states?

It doesn’t. With no reciprocity agreements in place, you apply as a new applicant.

How many CE hours do Utah HVAC contractors need?

You need 6 hours every licensing period, finished before you renew.

Where this information comes from

  1. Utah Admin. Code R156-55a, including R156-55a-302g (H100 Qualifier requirements)
  2. Utah Division of Occupational and Professional Licensing
  3. Utah Code Title 58, Chapter 1, Division of Occupational and Professional Licensing Act
  4. Utah Admin. Code R156-1, General Rules of DOPL
  5. Prov, exam scheduling
  6. Utah DOPL Fee Schedule
  7. Utah DOPL Contractor Application, All Classifications (PDF)
  8. Utah DOPL Contractor Renewal/Reinstatement Form (PDF)
  9. Prov, Utah HVAC Candidate Information Bulletin

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Utah Division of Occupational and Professional Licensing.