Oklahoma Code Official License: Requirements, Exam and How to Apply, Oklahoma Code Official License, Oklahoma, Building Inspector, One- & Two-Family Dwellings, Building Inspector General, Fire Protection General / Plan Review, Electrical Inspector, One- & Two-Family Dwellings, Electrical Inspector General, Mechanical Inspector, One- & Two-Family Dwellings, Mechanical Inspector General, Oklahoma Construction Industry Board, how to get a Oklahoma Code Official License, Oklahoma Code Official License requirements, Oklahoma Code Official License exam

Home Licenses Code Official License Oklahoma

Code Official License · Building, Electrical & Mechanical

Oklahoma Code Official License: Requirements, Exam and How to Apply

Here’s how to get licensed in Oklahoma as a building, electrical or mechanical inspector, plans examiner or code official: the exams you need, who gives them, and how applying and renewing work with the Oklahoma Construction Industry Board.

Last updated October 28, 2026 from Oklahoma Construction Industry Board requirements

Exam time

2 hrs

Each exam runs 120 minutes

Time to get license

Varies

Based on how quickly you pass your exams

Continuing ed

6 hrs

In the 12 months before you renew

Do you need an Oklahoma code official license?

Yes, if you plan to work as an inspector, plans examiner or code official for a county, city or other local government that has adopted the State Building Code. In Oklahoma, you pass the exams that match your trade and level, and then you apply for a license with the Oklahoma Construction Industry Board.

You need the license when

  • As the Code Official, you head a local code enforcement department
  • As a Code Inspector, you check buildings and job sites for code compliance
  • As a Code Plans Examiner, you check construction documents before permits are issued
  • Your work falls under the state building, electrical or mechanical codes

Exceptions

  • For one year after you pass your licensing exam, you don’t have to take continuing education
  • We couldn’t confirm any other exemptions, so ask the Board before you start working

Working unlicensed

We couldn’t confirm specific penalties. Because the Construction Industry Board licenses inspectors and code officials, it can take action against anyone working outside its rules. Get your license before you take on plan review or inspection work.

How to get an Oklahoma code official license in 6 steps

  1. Choose a trade and level Before you start
    Settle on building, electrical or mechanical inspection, and on whether you need unlimited coverage or residential (one- and two-family) only.
  2. Buy your code books Before the exam
    You can use your books during the exams. Tabs and highlighting are fine, but you can’t bring any outside study materials.
  3. Sign up with a testing agency Before you test
    Pick an agency and apply to test: ICC (1-888-422-7233) or Prov, which gives the NCPCCI exams. You’ll find test centers in larger cities around Oklahoma.
  4. Pass the exams Exam day
    You get 120 minutes for each 50-question NCPCCI exam. On the residential exams, the passing score is 70%.
  5. Apply to the Construction Industry Board After you pass
    Submit your license application through the Oklahoma Construction Industry Board. If you have questions, call 405-521-6550.
  6. Stay current on CE Every renewal
    In the 12 months before you renew, complete 6 hours of state-approved continuing education. The first year after you pass your exam is exempt.

Oklahoma code official application checklist

Oklahoma’s application on one page

  • Your trade and level (residential or unlimited)
  • Code books with tabs and highlights
  • Exam registration through ICC or Prov
  • Passing exam scores for your license
  • An application to the Construction Industry Board
  • Budget for 6 hours of CE before you renew

Oklahoma code official license classes

Inspector licenses in Oklahoma are divided by trade (building, electrical, mechanical) and by level. Residential covers one- and two-family dwellings, and unlimited (general) covers every building. There’s a separate exam for each level.

1A Residential

Building Inspector, One- & Two-Family Dwellings

Footing and foundation, framing and final inspections for homes.

Exam1A (NCPCCI) or ICC B1
Limit1- and 2-family dwellings

1B Unlimited

Building Inspector General

Foundation, structural, life safety and fire safety inspections for every building type.

Exam1B (NCPCCI) or ICC B2
LimitAll buildings

3B/3C Unlimited add-on

Fire Protection General / Plan Review

Fire protection systems and building structure. Part of the unlimited building track.

Exam3B and 3C (NCPCCI)
LimitAll buildings

2A Residential

Electrical Inspector, One- & Two-Family Dwellings

Wiring methods, services, panelboards, and load and wire-size calculations for homes.

Exam2A (NCPCCI) or ICC E1
Limit1- and 2-family dwellings

2B Unlimited

Electrical Inspector General

Goes beyond dwellings to cover generators, motors and special occupancies.

Exam2B (NCPCCI) or ICC E2
LimitAll buildings

4A Residential

Mechanical Inspector, One- & Two-Family Dwellings

Fuel systems, combustion air, vents, chimneys, distribution systems and appliances for homes.

Exam4A (NCPCCI) or ICC M1
Limit1- and 2-family dwellings

4B Unlimited

Mechanical Inspector General

Fuel systems, venting, appliances, piping and air distribution for every building type.

Exam4B (NCPCCI) or ICC M2
LimitAll buildings

Requirements for each Oklahoma code official class

Every trade follows the same path: pass the exam for your level and then apply to the Board. Each trade also lists ICC certifications as accepted, plans examiner certifications included.

RequirementBuildingElectricalMechanical
Residential exam1A2A4A
Unlimited exams1B, plus the 3B/3C fire protection exams2A and 2B4A and 4B
ICC certifications acceptedB1, B2, B3E1, E2, E3M1, M2, M3
Exam formatOpen book, 50 questions, 120 minOpen book, 50 questions, 120 minOpen book, 50 questions, 120 min
Passing score70% (1A)70% (2A)70% (4A)
ExperienceNot statedNot statedNot stated
Continuing education6 hrs ahead of renewal6 hrs ahead of renewal6 hrs ahead of renewal

The Oklahoma code official exam

Oklahoma inspectors take either ICC exams or NCPCCI exams (given by Prov). All of the exams listed are open book, so being able to find your way around the code books matters as much as knowing the content.

Format

Open book

Questions

50

Passing score

70%

Exam vendor

ICC or Prov (NCPCCI)

Scoring and content

  • Every NCPCCI exam: 120 minutes, 50 questions
  • Residential exams (1A, 2A, 4A): 70% passing score
  • We couldn’t confirm the passing score for the general exams (1B, 2B, 4B)
  • You can tab and highlight your books
  • Expect a lot of load and wire-size calculations on the electrical exams

Retakes

  • We couldn’t confirm the retake rules
  • Read the testing agency’s candidate bulletin before booking
  • For reference, the Board posts a PSI candidate bulletin on its website

Books and codes for this exam (open book)

The exams are open book, and the approved references can be tabbed and highlighted. The list covers the building (1A, 1B, 3B/3C), electrical (2A, 2B) and mechanical (4A, 4B) inspector exams.

ReferenceEditionHow it’s used
International Residential Code (IRC) — 1A Building, 2A/2B Electrical and 4A/4B Mechanical exams2021Allowed in exam
International Building Code (IBC) — 1B Building and 3B/3C Fire Protection exams2021Allowed in exam
NFPA 13: Standard for the Installation of Sprinkler Systems — 3B/3C Fire Protection exam2019Allowed in exam
NFPA 72: National Fire Alarm and Signaling Code — 3B/3C Fire Protection exam2019Allowed in exam
NFPA 70: National Electrical Code (NEC) — 2A/2B Electrical exams2020Allowed in exam
International Mechanical Code (IMC) — 4B Mechanical exam2021Allowed in exam
International Fuel Gas Code (IFGC) — 4B Mechanical exam2021Allowed in exam

The sources we checked also list the 2018 IRC for the 4A residential mechanical exam, so confirm the edition in the candidate bulletin.

Prep for the Oklahoma code official exam

Our exam prep course, Total Prep and complete bundle for the Oklahoma code official exam. Prices are coming soon.

Books for this exam

Renewing your Oklahoma code official license

Ahead of each renewal, complete 6 hours of state-approved continuing education within the previous 12 months. For one year after you pass your licensing exam, you’re exempt. Ask the Board for the current renewal steps.

Renewal cycle

Not stated

CE hours

6

Renewal fee

Not stated

Late penalty

Not stated

Oklahoma code official CE

Hours, deadlines, required topics and the renewal steps, in one guide.

Licensed in another state?

We couldn’t confirm any reciprocity agreements for Oklahoma inspector licenses.

No reciprocity agreements on record

Since none are on record, expect to apply as a new candidate. If you have ICC certifications already, ask the Board if they count toward an Oklahoma license.

City and county rules in Oklahoma

Inspectors and code officials are licensed by the state, but they work for the counties, cities and other local governments that adopt the State Building Code.

What the state handles

  • Licenses for code officials, inspectors and plans examiners
  • Which exams and ICC certifications are accepted
  • Approving continuing education
  • Renewing licenses

What cities and counties handle

  • Hiring plans examiners and inspectors
  • Running the local code enforcement office
  • Inspections and permits
  • Adopting the State Building Code at the local level

Who oversees Oklahoma code officials

Licensing authority

Oklahoma Construction Industry Board

405-521-6550

oklahoma.gov/cib/your-industry/building-inspectors

What the board does

  • Issues and renews licenses for code officials, inspectors and plans examiners
  • Decides which certifications and exams qualify
  • Approves the continuing education used for renewal

Oklahoma code official license: common questions

Who licenses building inspectors in Oklahoma?

The Oklahoma Construction Industry Board. First you pass your exams, and then you apply to the Board for your license.

Are Oklahoma inspector license exams open book?

Yes. Tabbed and highlighted code books are allowed, but other study materials aren’t.

How many questions are on the Oklahoma inspector exam?

Every NCPCCI inspector exam has 50 questions, and you get 120 minutes. The passing score on the residential exams is 70%.

Can you use ICC certifications for an Oklahoma inspector license?

Each trade lists ICC certifications as accepted: B1, E1 and M1 for residential, and B2, E2 and M2 for commercial. Check with the Board before applying.

What’s the difference between a residential and an unlimited Oklahoma inspector license?

It comes down to which buildings you can inspect. Residential is limited to one- and two-family dwellings. Unlimited lets you inspect any building, and you have to pass the general exams (1B, 2B or 4B, for example).

How much CE do Oklahoma inspectors need?

You need 6 hours of state-approved CE in the 12 months before you renew. For one year after passing your exam, you’re exempt.

Where do you take the Oklahoma inspector exam?

Sign up with ICC or with Prov, which gives the NCPCCI exams. You’ll find test centers in larger cities around Oklahoma.

Where this information comes from

  1. Oklahoma Construction Industry Board, Building Inspectors
  2. Oklahoma Construction Industry Board, PSI Candidate Information Bulletin (PDF)
  3. Prov, NCPCCI exam information (PDF)
  4. Prov
  5. International Code Council (ICC)

Last updated October 28, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Oklahoma Construction Industry Board.