Oklahoma Electrical Contractor License: Requirements, Exam and How to Apply, Oklahoma Electrical Contractor License, Oklahoma, Unlimited Electrical Contractor, Residential Electrical Contractor, Limited Electrical Contractor, Oklahoma Construction Industries Board (CIB), how to get a Oklahoma Electrical Contractor License, Oklahoma Electrical Contractor License requirements, Oklahoma Electrical Contractor License exam, Oklahoma licensing board, Oklahoma contractor license, license application steps, exam reference books, Unlimited + B&L, Limited + B&L

Home Licenses Electrical Contractor License Oklahoma

Electrical Contractor · Unlimited, Residential & Limited

Oklahoma Electrical Contractor License: Requirements, Exam and How to Apply

This guide walks you through choosing a class, documenting your hours, passing both exams and getting your electrical contractor license from the Oklahoma Construction Industries Board.

Last updated October 27, 2026 from Oklahoma Construction Industries Board requirements

Exam time

6 hrs

Unlimited or Limited plus B&L; Residential runs 5.5 hrs

Time to get license

~6 yrs

On the main route, 12,000 verifiable hours at full time

Continuing ed

Required

Due ahead of every renewal; we couldn’t confirm the hours

Do you need an Oklahoma electrical contractor license?

Yes. In Oklahoma, anyone doing any kind of electrical work for pay needs a license. Running the business side takes an Electrical Contractor license, and each electrical contractor has to be an owner, partner or officer of the electrical firm.

You need the license when

  • You’re paid for compensation to do any electrical work in Oklahoma
  • As a contractor, you lay out, install, repair, maintain or replace electrical conduit, wiring, equipment or fixtures
  • Your business wires one- and two-family dwellings (Residential class)
  • You’re an officer, partner or owner of an electrical firm

Exceptions

  • Apprentices and journeymen who work for a licensed contractor carry their own licenses, not a contractor license
  • We couldn’t confirm other exemptions, so read the Electrical License Act or ask the CIB

Penalties for working without a license

Violations can be fined by the CIB under the fine schedules in OAC 158, Chapter 10. We couldn’t confirm specific amounts, so review the schedule before you accept a job.

How to get an Oklahoma electrical contractor license in 6 steps

  1. Pick your class Before anything else
    Choose Unlimited, Residential or Limited. Keep in mind that each contractor has to be an owner, partner or officer of the firm.
  2. Gather proof of your hours Ahead of applying
    Collect verifiable proof of the time you worked for licensed electrical contractors, along with any formal electrical education you plan to count.
  3. Send in your application Ahead of the exam
    Send the CIB your application with verified experience and education. The Board must approve you before you can test.
  4. Pass Business & Law and your trade exam Test day
    After approval, the state reaches out with your exam date and time. You’ll find test centers in the larger cities around Oklahoma.
  5. Secure your bond and insurance Ahead of licensing
    Arrange workers’ comp coverage, $50,000 in general liability and a $5,000 security bond.
  6. Apply for the license Last step
    After you pass both exams, finish your license application with the CIB.

Oklahoma electrical contractor application checklist

Everything for your Oklahoma application in one place

  • An owner, partner or officer role in the electrical firm
  • Verifiable hours worked for licensed electrical contractors
  • An application the Board has approved
  • Passing scores on Business & Law and your trade exam
  • A $5,000 security bond
  • Certificates for workers’ comp and $50,000 in general liability

Oklahoma electrical contractor license classes

There are three electrical contractor classes in Oklahoma. Each one requires you to be an owner, partner or officer of the electrical firm.

UNL Most popular

Unlimited Electrical Contractor

Covers laying out, installing, repairing, maintaining or replacing any part of electrical wiring, apparatus, conduit, appliances, fixtures or equipment.

ExamUnlimited + B&L
LimitNo class limit

RES Homes only

Residential Electrical Contractor

Restricted to wiring one- and two-family dwellings, as the National Electrical Code defines them.

ExamResidential + B&L
Limit1–2 family homes

LTD No employees

Limited Electrical Contractor

You have to be an owner, partner or officer of the firm, and you can’t hire journeyman or apprentice electricians.

ExamLimited + B&L
LimitNo apprentices or journeymen

Requirements for each Oklahoma electrical contractor class

Every applicant needs the same bond and insurance. We found three experience routes but couldn’t confirm which class each one applies to, so check with the CIB on the route for your class.

Requirement12,000-hour route8,000-hour routeDegree or 16,000-hour route
Total experience12,000 verifiable hours working for a licensed electrical contractor8,000 verifiable hours working for an electrical contractor16,000 hrs in the trade, or an EE degree plus 8,000 hrs
Journeyman or apprentice hours4,000 hrs across 2 years holding an Unlimited Journeyman license4,000 hrs as an apprentice or journeyman, or 3,000 apprentice hrs plus 1,000 of educationNot stated
Commercial or industrial6,000 hrsNot statedEstimating, project management or commercial and industrial field work
Credit for educationUp to 2,000 hrsUp to 1,000 hrs (apprentice option)Degree option
Security bond$5,000$5,000$5,000
General liability$50,000$50,000$50,000
Workers’ compRequiredRequiredRequired

The Oklahoma electrical contractor exam

Each electrical contractor takes two exams: Business & Law and the trade exam for their class. The trade exam is open book, and you can tab and highlight your references.

Format

Open book

Questions

100 or 80 + 50

Passing score

70%

Exam vendor

PSI

Scoring and content

  • Unlimited or Limited: 100 questions in 240 minutes, and you need 70% to pass
  • Residential: 80 questions in 210 minutes
  • Business & Law: 50 questions in 120 minutes
  • Trade content: grounding and bonding, services and feeders, overcurrent protection, raceways, low voltage, special occupancies and safety
  • Bring a printed copy of the CIB’s electrical statutes and rules to the exam

Retakes

  • Wait time before retaking: 30 days
  • Retake cost: $92 for each exam portion
  • Once your application is approved, the state reaches out to schedule you
  • Passing score for Business & Law and Residential: Not stated

Books and codes for this exam (open book)

The Oklahoma Electrical Contractor trade exam is open book, and your references can be tabbed and highlighted. The list also covers the Business and Law exam, including state rules and laws you print out and bring with you.

ReferenceEditionHow it’s used
NFPA 70: National Electrical Code (NEC) — trade exam2023Allowed in exam
Ugly’s Electrical References — trade exam2023Allowed in exam
OSHA 1926 Construction Industry Regulations — trade examNot statedAllowed in exam
NASCLA Contractor’s Guide to Business, Law and Project Management, Basic Edition — Business and Law examBasic EditionNot stated
Oklahoma Electrical Industry Regulations (OAC Title 158, Chapter 40) — Business and Law examNot statedAllowed in exam
Fine Schedules (OAC Title 158, Chapter 10) — Business and Law examNot statedAllowed in exam
Oklahoma Electrical License Act (Title 59, Chapter 40A) — Business and Law examNot statedAllowed in exam
Oklahoma Lien Law (Title 42, Chapter 3) — Business and Law examNot statedAllowed in exam

Prep for the Oklahoma electrical contractor exam

Our exam prep course, Total Prep and complete bundle for the Oklahoma electrical contractor exam. Prices are coming soon.

Books for this exam

Renewing your Oklahoma electrical contractor license

You renew a contractor license every year for $200, or $300 if you’re more than 30 days past expiration. Oklahoma also requires continuing education ahead of each renewal, so check the CE hours with the CIB.

Renewal cycle

Annual

CE hours

Required (we couldn’t confirm the hours)

Renewal fee

$200

Late penalty

$300 in total when you renew 30+ days late

Oklahoma electrical contractor CE

Hours, deadlines, required topics and the renewal steps, in one guide.

Licensed in another state?

Oklahoma has reciprocity with 10 states. We couldn’t confirm the exact terms, so check with the CIB on what’s waived before you apply.

Alaska: reciprocity agreement

We couldn’t confirm the terms. Ask the CIB which exams or requirements you can skip.

Arkansas: reciprocity agreement

The terms aren’t published in the sources we checked. Check with the CIB about which exams or requirements are waived.

Colorado: reciprocity agreement

We couldn’t confirm the terms. The CIB can tell you which exams or requirements are waived.

Idaho: reciprocity agreement

The sources we checked don’t give the terms. Ask the CIB which requirements or exams don’t apply to you.

Iowa: reciprocity agreement

We couldn’t confirm the terms. Confirm with the CIB which exams or requirements are waived.

Montana: reciprocity agreement

The terms aren’t published in the sources we checked. Ask the CIB which exams or requirements you won’t need to repeat.

Nebraska: reciprocity agreement

We couldn’t confirm the terms. Check with the CIB on which exams or requirements are waived.

South Dakota: reciprocity agreement

The sources we checked don’t give the terms. Ask the CIB which exams or requirements you can skip.

Texas: reciprocity agreement

We couldn’t confirm the terms. The CIB can tell you which requirements or exams are waived.

Wyoming: reciprocity agreement

The terms aren’t published in the sources we checked. Ask the CIB which exams or requirements are waived.

City and county rules in Oklahoma

The CIB issues electrical licenses that are good statewide. Permits and inspections for each job are still handled by cities and counties.

What the state handles

  • Licenses for electrical contractors, journeymen and apprentices
  • Approving applications and running exams
  • Rules for bonds and insurance
  • Fines under OAC 158, Chapter 10

What cities and counties handle

  • Electrical permits
  • Inspections
  • Local registration rules, if any

Who oversees Oklahoma electrical contractors

Licensing authority

Oklahoma Construction Industries Board (CIB)

405-521-6550

cib.ok.gov

What the board does

  • Issues electrical contractor licenses and handles renewals
  • Approves applications and sets up exams
  • Enforces Title 158, Chapter 40 rules and the Electrical License Act
  • Fines violations using its published fine schedules

Oklahoma electrical contractor license: common questions

How do Oklahoma Unlimited, Residential and Limited electrical contractor licenses differ?

An Unlimited license covers every kind of electrical work. A Residential license is restricted to one- and two-family dwellings. Limited contractors aren’t allowed to hire journeymen or apprentices.

How many experience hours does an Oklahoma electrical contractor license require?

On the main route, you need 12,000 verifiable hours working for a licensed electrical contractor, with 4,000 of them as a licensed Unlimited Journeyman and 6,000 in industrial or commercial work. The other routes call for 8,000 hours, 16,000 hours in the trade, or an electrical engineering degree with 8,000 hours.

Which exams does the Oklahoma electrical contractor license require?

You take Business & Law and the trade exam for your class. Unlimited and Limited have 100 questions in 240 minutes, Residential has 80 questions in 210 minutes, and Business & Law has 50 questions in 120 minutes.

Is the Oklahoma electrical contractor exam open book?

Yes, and you can tab and highlight your references. For the Unlimited and Limited exam, a score of 70% passes.

What bond and insurance does an Oklahoma electrical contractor need?

You need workers’ comp coverage, $50,000 in general liability insurance and a $5,000 security bond.

Does Oklahoma offer reciprocity for electrical contractor licenses?

Yes, with Texas, Arkansas, Colorado, Alaska, Idaho, Iowa, Montana, Nebraska, South Dakota and Wyoming. Check with the CIB on what’s waived.

Do you have to own the company to get an Oklahoma electrical contractor license?

Yes. In Oklahoma, each electrical contractor has to be an owner, partner or officer of the electrical firm.

Where this information comes from

  1. Oklahoma Construction Industries Board
  2. Electrical License Act, Title 59, Chapter 40A (PDF)
  3. Oklahoma Electrical Industry Regulations, Title 158, Chapter 40 (PDF)
  4. CIB fine schedules, OAC 158, Chapter 10 (PDF)
  5. Oklahoma Lien Law, Title 42, Chapter 3 (PDF)
  6. PSI Candidate Information Bulletin, Oklahoma Contractors Licensure (PDF)
  7. CIB Chapter 40 Rule Impact Statement, fee changes under SB 1732 (PDF)

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Oklahoma Construction Industries Board.