Washington Low Voltage License: Requirements, Exam and How to Apply, Washington Low Voltage License, Washington, Limited Energy Electrician, Limited Energy Administrator, Limited Energy Master Electrician, Washington State Department of Labor & Industries, how to get a Washington Low Voltage License, Washington Low Voltage License requirements, Washington Low Voltage License exam, Washington licensing board, Washington contractor license, license application steps, exam reference books, Low voltage only, Work experience, Classroom instruction, Time limit

Home Licenses Low Voltage License Washington

Low Voltage License · Electrician, Administrator & Master

Washington Low Voltage License: Requirements, Exam and How to Apply

Washington treats low voltage work as the 06 Limited Energy electrical specialty. This guide walks through the Department of Labor & Industries’ rules on experience, classroom hours, exams and renewal.

Last updated October 27, 2026 from Washington State Department of Labor & Industries requirements

Exam time

3 hrs

For the master exam; we couldn’t confirm times for the other 06 exams

Time to get license

4,000 hrs

Supervised on-the-job hours, and 48 hours in the classroom

Continuing ed

24 hrs

Per licensing period

Do you need a Washington low voltage license?

Yes. Washington licenses low voltage electrical work as a specialty known as 06 Limited Energy. It includes signaling and power-limited circuits in every type of occupancy, and you have to be certified before working on your own.

You need the license when

  • Telecom (telecommunications) work, intrusion alarms, or signaling systems for fire protection are part of your job
  • You wire low-voltage HVAC/refrigeration controls, lighting control or energy management systems
  • You put in automation and industrial control systems
  • You put in amplified sound or public address systems for homes or businesses

Exceptions

  • While building hours, trainees can do this work as long as a certified 06 specialty electrician or a journey level electrician supervises them at least 75% of the time
  • Anything past low-voltage, power-limited circuits is outside this specialty and calls for another electrical certificate

What happens if you work unlicensed

We couldn’t confirm penalty amounts. L&I enforces RCW 19.28, the state’s electrical licensing law, and can take action against anyone doing electrical work without the proper certificate.

How to get a Washington low voltage license in 6 steps

  1. Work under supervision as a trainee 4,000 hours
    As a trainee, you need 4,000 hours of experience. A certified 06 specialty electrician or a journey level electrician must supervise you for at least 75% of those hours.
  2. Finish basic classroom instruction 48 hours
    Testing opens up only after you complete 48 hours of state-required coursework. L&I explains it on its basic classroom page.
  3. File your experience affidavit Before applying
    L&I has to have an affidavit of your classroom and experience hours. Call 360-902-5269 to make sure it’s on file.
  4. Send in your application and fees
    You can apply online, by mail or in person at your local Labor & Industries office.
  5. Book and pass the PSI exam Exam day
    After you’re approved, L&I mails a notice telling you how to schedule with PSI. You can use books on the exam.
  6. Get your certificate Once you pass
    You’ll receive a Washington electrical certificate from L&I showing the 06 Limited Energy specialty.

Washington low voltage application checklist

Washington’s application on one page

  • 4,000 hours of work experience under supervision
  • 48 hours of basic classroom instruction done
  • Experience affidavit filed with L&I
  • L&I application and fees sent
  • Scheduling notice for PSI from L&I
  • A passing score on the 06 Limited Energy exam

Washington low voltage license classes

There are three exams under the 06 Limited Energy specialty, based on your role: the electrician doing the work, the administrator overseeing a contractor’s electrical work, and the master electrician.

06 Most common

Limited Energy Electrician

Handles power-limited and signaling circuits: alarms and fire signaling, telecom, sound systems, and lighting and low-voltage HVAC controls.

Exam51 questions
LimitLow voltage only

06 Admin Business role

Limited Energy Administrator

The administrator-level exam under the 06 Limited Energy specialty.

Exam61 questions
LimitLow voltage only

06 Master Top tier

Limited Energy Master Electrician

The master-level exam under the 06 Limited Energy specialty.

Exam70 questions, 3 hrs
LimitLow voltage only

Requirements for each Washington low voltage class

The sources we checked spell out the 06 electrician requirements in full. For the administrator and master exams, they only cover the exam details.

Requirement06 Electrician06 Administrator06 Master
Work experience4,000 hoursNot statedNot stated
Classroom instruction48 hours of basic classroom instructionNot statedNot stated
Supervision as a traineeAt least 75% of the timeNot statedNot stated
Exam questions516170
Passing scoreNot statedNot stated70%
Time limitNot statedNot stated3 hours

The Washington low voltage exam

Every 06 Limited Energy exam is open book, and PSI gives it once L&I approves your application. You’ll see questions on electrical theory, the NEC and Washington’s own electrical codes.

Format

Open book

Questions

51 / 61 / 70

Passing score

70% (for master)

Exam vendor

PSI

Scoring and content

  • 51 questions for electrician, 61 for administrator, 70 for master
  • Master: 3 hours; pass with 70%
  • Covers NEC and theory, along with Washington codes
  • You can tab and highlight your references, RCW 19.28 and WAC 296-46B among them
  • The state adopted the 2023 NEC, but the exams still haven’t moved to it

Retakes

  • After you fail, wait 14 days to retest; after a third failure, wait 3 months
  • You book with PSI using the notice L&I sends you by mail
  • PSI charges for retest sections by the hour: $45 for 1 hour, $55 for 2 hours

Books and codes for this exam (open book)

The 06 Limited Energy Electrician, Master and Administrator exams are open book, and you can tab and highlight these references and bring them into the PSI exam.

ReferenceEditionHow it’s used
NFPA 70: National Electrical Code (NEC)2020Allowed in exam
NFPA 70: National Electrical Code (NEC)2023Allowed in exam
Ugly’s Electrical References2023Allowed in exam
Fast WAC & RCW FinderNot statedAllowed in exam
RCW Chapter 19.28: Electricians and Electrical InstallationsNot statedAllowed in exam
WAC Chapter 296-46B: Electrical Safety Standards, Administration, and InstallationNot statedAllowed in exam

Washington has adopted the 2023 NEC, but the exams haven’t switched over yet (no date set), so check which NEC edition your exam uses before you buy.

Prep for the Washington low voltage exam

Our exam prep course, Total Prep and complete bundle for the Washington low voltage exam. Prices are coming soon.

Books for this exam

Renewing your Washington low voltage license

Licensed electricians renew by taking 24 hours of continuing education every licensing period. Renewing a specialty electrician certificate costs $106.40, or $92.60 if you do it online. We couldn’t confirm the cycle length, so ask L&I.

Renewal cycle

Every licensing period

CE hours

24

Renewal fee

$106.40 ($92.60 online)

Late penalty

Renewing late costs $212.90 ($185.30 online)

Licensed in another state?

Washington and Idaho have a reciprocity agreement. We couldn’t confirm exactly what it waives, so check the details with L&I.

Idaho: reciprocity agreement

Idaho and Washington share a reciprocity agreement for electrical licensing. Ask L&I which requirements transfer for the 06 specialty.

Every other state: no agreement

You apply as a new applicant: show your classroom and experience hours, and then pass the PSI exam.

City and county rules in Washington

The state issues electrical certificates through L&I. We couldn’t confirm any separate city or county licenses for limited energy work.

The state handles

  • 06 Limited Energy certificates
  • Classroom hours and experience affidavits
  • Approving exams (testing is through PSI)
  • CE for renewal

Cities and counties handle

  • Building permits for each job
  • Local business licensing

Who oversees low voltage electricians in Washington

Licensing authority

Washington State Department of Labor & Industries

360-902-5269

lni.wa.gov electrical licensing, exams & education

What the board does

  • Grants and renews electrician certificates, the 06 Limited Energy specialty among them
  • Keeps classroom and experience affidavits on record
  • Approves exam applications and mails PSI scheduling notices
  • Sets the rules for basic classroom instruction and CE

Washington low voltage license: common questions

Is there a low voltage license in Washington?

Yes. The Department of Labor & Industries issues it as the 06 Limited Energy electrical specialty.

How many hours do you need for a Washington limited energy license?

Before you can sit the 06 electrician exam, you need 48 hours of basic classroom instruction and 4,000 hours of supervised work experience.

What work does Washington’s limited energy license cover?

Power-limited and signaling circuits. That includes intrusion alarms, telecom, fire protection signaling, sound systems, and automation, lighting and low-voltage HVAC controls.

Is the Washington limited energy license exam open book?

Yes. PSI gives the exams, and they’re open book. For master, you get 70 questions in 3 hours and need 70% to pass.

How much supervision do Washington limited energy trainees need?

A certified 06 specialty electrician or a journey level electrician has to supervise trainees at least 75% of the time.

Does Washington have reciprocity for low voltage licenses?

Yes, with Idaho. If you’re from another state, you apply as a new applicant.

How much continuing education do Washington low voltage electricians need?

You need 24 hours every licensing period to renew.

Where this information comes from

  1. Washington L&I, Electrical licensing, exams and education
  2. Washington L&I, Basic classroom instruction and continuing education
  3. RCW Chapter 19.28, Electricians and electrical installations (PDF)
  4. WAC Chapter 296-46B, Electrical safety standards, administration and installation (PDF)
  5. NFPA 70, National Electrical Code
  6. WAC 296-46B-909, Electrical certificate and examination fees
  7. PSI, Washington L&I electrical candidate information bulletin (PDF)

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Washington State Department of Labor & Industries.