Utah General Contractor License: Requirements, Exam and How to Apply, Utah General Contractor License, Utah, General Building Contractor, Residential & Small Commercial Contractor, Utah Division of Occupational and Professional Licensing (DOPL), how to get a Utah General Contractor License, Utah General Contractor License requirements, Utah General Contractor License exam, Utah licensing board, Utah contractor license, license application steps, exam reference books, Business & Law, Pre-licensing course, Experience, Other ways to meet experience

Home Licenses General Contractor License Utah

General Contractor · B100 & R100

Utah General Contractor License: Requirements, Exam and How to Apply

Utah has two broad building licenses: the General Building Contractor (B100) and the Residential & Small Commercial Contractor (R100). Here’s what each one covers, how you qualify, what to expect on the Business & Law exam and how you keep the license active.

Last updated October 27, 2026 from Utah Division of Occupational and Professional Licensing requirements

Exam time

2 hrs

Open-book Business & Law test with 60 questions

Time to get license

~2 yrs

4,000 hours of paid construction experience, or a different qualifying route

Continuing ed

6 hrs

Finish it before your license expires

Do you need a Utah general contractor license?

You do if you work as a general or residential contractor building or superintending structures in Utah. The state licenses contractors two ways: by specific trade, or in broad categories such as building, engineering, residential and commercial. The B100 and R100 are the broad building licenses.

You need the license when

  • You build or superintend the construction of buildings, other structures or their parts
  • You build single-family homes, or multifamily homes with no more than 4 units
  • Your commercial work includes projects as small as 3 stories and 20,000 square feet
  • You plan to bid on and contract for this work as a general or residential contractor

Exceptions

  • Neither license covers plumbing, electrical or mechanical work; each of those needs its own trade license
  • Neither license covers installing manufactured housing
  • The B100 doesn’t cover work on an elevator’s operating integrity

What happens if you work unlicensed

DOPL can investigate complaints and can discipline or penalize anyone who contracts without the right license. Before you take on a job, ask DOPL what the current penalties are.

How to get a Utah general contractor license in 6 steps

  1. Decide between B100 and R100 Before you start
    If your work is homes, small multifamily and commercial jobs no bigger than 3 stories and 20,000 square feet, the R100 fits. For bigger building projects, choose the B100.
  2. Finish the 30-hour pre-licensing course Before you apply
    You need an approved 30-hour pre-licensing course. An exam review course won’t satisfy this requirement.
  3. Show your experience Before you apply
    Self-certify 4,000 hours (2 years) of paid construction work. You can also qualify through a construction management degree, a Utah PE license, a passing NASCLA score or 1 year of licensure in another state.
  4. Get pre-approved, then book your exam Before exam day
    You need pre-approval from the testing agency first. Book with Prov at provexam.com or call 866-720-7768. You’ll find test centers in the bigger cities around Utah.
  5. Pass the Business & Law test Exam day
    You get 120 minutes for 60 open-book questions, and you pass with 42 correct.
  6. Send your application to DOPL After the exam
    Your application goes to the Division of Occupational and Professional Licensing (dopl.utah.gov/contractor). You can reach them at 801-530-6628 if anything is unclear.

Utah general contractor application checklist

Utah’s application on one page

  • Pick your classification: B100 or R100
  • Finish an approved 30-hour pre-licensing course
  • Show 4,000 hours of experience, or qualify another way
  • Get pre-approved by the testing agency
  • Pass Business & Law (42 of 60 correct)
  • Submit your application to DOPL

Utah general contractor license classes

Choose the classification that fits the size and kind of buildings you work on. You take the Business & Law exam for either one, and neither lets you do plumbing, electrical or mechanical work.

B100 Broadest scope

General Building Contractor

Building structures that support, shelter or enclose people, animals or property of any kind, or building any part of those structures.

ExamBusiness & Law
LimitNot stated

R100 Homes & small commercial

Residential & Small Commercial Contractor

Single-family homes, multifamily buildings with up to 4 units, and commercial jobs no taller than 3 stories above ground and no larger than 20,000 square feet.

ExamBusiness & Law
Limit3 stories, 20,000 sq ft commercial

Requirements for each Utah general contractor class

You qualify for either classification the same way. The difference is the scope of work you’re allowed to do after you’re licensed.

RequirementB100 General BuildingR100 Residential & Small Commercial
Pre-licensing course30 hours, approved course30 hours, approved course
Experience4,000 hours (2 years) of paid construction work, which you self-certify4,000 hours (2 years) of paid construction work, which you self-certify
Other ways to meet experienceQualify instead with a construction management degree, Utah PE licensure, the NASCLA exam, 2 years as a Utah qualifier or 1 year licensed out of stateQualify instead with a construction management degree, Utah PE licensure, the NASCLA exam, 2 years as a Utah qualifier or 1 year licensed out of state
ExamBusiness & LawBusiness & Law
Work not coveredPlumbing, electrical, mechanical, elevators, manufactured housingPlumbing, electrical, mechanical, manufactured housing

The Utah general contractor exam

All B100 and R100 applicants have to pass Utah’s Business & Law exam, even when a NASCLA score takes care of the experience requirement. Because the test is open book, how well you know your references matters as much as how well you know the content.

Format

Open book

Questions

60

Passing score

42 correct

Exam vendor

Prov

Scoring and topics

  • 120 minutes to answer 60 questions
  • You pass with 42 correct answers
  • Topics include licensing, business organizations, bidding and estimating, and managing contracts and projects
  • Plus labor, lien and tax law, financial and risk management, and safety
  • You can tab and highlight the approved references

Retakes

  • We couldn’t confirm the retake rules
  • You need testing agency pre-approval before you can schedule
  • Call Prov at 866-720-7768 to ask about current retake and rescheduling rules

Books and codes for this exam (open book)

The Utah Business and Law exam is open book, and the approved reference can be tabbed, highlighted and used during the test.

ReferenceEditionHow it’s used
NASCLA Contractor’s Guide to Business, Law and Project Management (Utah edition)4th editionAllowed in exam

Prep for the Utah general contractor exam

Our exam prep course, Total Prep and complete bundle for the Utah general contractor exam. Prices are coming soon.

Books for this exam

Renewing your Utah general contractor license

Before your license expires, wrap up 6 hours of continuing education. Then file your renewal with DOPL.

Renewal cycle

Every 2 years, on Nov 30 of odd years

CE hours

6

Renewal fee

$129

Late penalty

+$20 up to 30 days late; +$50 past 30 days

Utah general contractor CE

Hours, deadlines, required topics and the renewal steps, in one guide.

Licensed in another state?

Utah doesn’t have reciprocity agreements, though a license from another state can still help you qualify.

No reciprocity with any state

You apply as a new applicant. If you’ve held an active license in good standing in another state for one year, in a similar scope, that can meet the experience requirement. A passing NASCLA Commercial General Building score works too. Either way, you still take Utah’s Business & Law exam.

City and county rules in Utah

DOPL issues your state license. Permits and inspections are usually handled by cities and counties, so call the local building department before you start work.

What the state handles

  • Contractor licenses and classifications (DOPL)
  • Pre-licensing and CE requirements
  • The Business & Law exam (Prov)
  • License renewal

What cities & counties handle

  • Building permits
  • Inspections
  • Local business licensing

Who oversees Utah general contractors

Licensing authority

Utah Division of Occupational and Professional Licensing (DOPL)

801-530-6628

dopl.utah.gov/contractor

What the board does

  • Issues contractor licenses and handles renewals
  • Defines classifications like the B100 and R100
  • Approves who can sit for the Business & Law exam
  • Sets the pre-licensing and continuing education rules

Utah general contractor license: common questions

What’s the difference between the Utah B100 and R100 licenses?

With a B100, you can build buildings of any size. An R100 limits you to homes, multifamily buildings with up to 4 units, and commercial jobs of up to 3 stories and 20,000 square feet.

How much experience do you need for a Utah contractor license?

You self-certify 4,000 hours (2 years) of paid construction work. Instead, you can qualify with a construction management degree, a Utah PE license, a passing NASCLA score or 1 year of licensure in another state.

Is the Utah Business & Law contractor exam open book?

It is, and you’re allowed to tab and highlight the approved references. You get 120 minutes for 60 questions and need 42 correct to pass.

Do you need a pre-licensing course for a Utah contractor license?

Yes. Applicants for either the B100 or R100 must finish an approved 30-hour pre-licensing course. Exam review classes don’t count.

Does Utah offer contractor license reciprocity?

It doesn’t. Still, 1 year of licensed experience in another state, with an active license in good standing, can meet the experience requirement. You’ll still need to pass Utah’s Business & Law exam.

Does passing the NASCLA exam let you skip Utah’s Business & Law exam?

No. A passing NASCLA Commercial General Building score takes the place of the experience requirement, but Utah’s Business & Law exam is still required.

How many CE hours do Utah contractors need?

You need 6 hours, finished before your license expiration date.

Can a Utah general contractor do plumbing or electrical work?

No. Neither the B100 nor the R100 covers plumbing, electrical or mechanical work. Each needs its own license.

Where this information comes from

  1. Utah Division of Occupational and Professional Licensing, Contractor licensing
  2. Prov, Utah exam scheduling
  3. NASCLA Contractors Guide to Business, Law and Project Management, 4th Edition
  4. Utah DOPL Fee Schedule
  5. Utah DOPL Contractor Application, All Classifications (PDF)
  6. Utah DOPL Contractor Renewal/Reinstatement Form (PDF)
  7. Prov, Utah Contracting Candidate Information Bulletin

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Utah Division of Occupational and Professional Licensing.