Florida Low Voltage License: Requirements, Exam and How to Apply, Florida Low Voltage License, Florida, Limited Energy Systems Specialty Contractor, Alarm System Contractor I, Alarm System Contractor II, Retaking the exam, Florida Department of Business and Professional Regulation, how to get a Florida Low Voltage License, Florida Low Voltage License requirements, Florida Low Voltage License exam, Florida licensing board, Florida contractor license, license application steps, exam reference books, B&F + Limited Energy, B&F + Alarm I, All alarm systems

Home Licenses Low Voltage License Florida

Low Voltage License · Limited Energy & Alarm

Florida Low Voltage License: Requirements, Exam and How to Apply

Thinking about a Limited Energy, Alarm System Contractor I or Alarm System Contractor II license in Florida? Here’s what it takes, from experience and financial paperwork to the two state exams.

Last updated October 27, 2026 from Florida Department of Business and Professional Regulation requirements

Exam time

7.5 hrs

2.5 hrs for Business and Finance and 5 hrs for Limited Energy

Time to get license

~3–6 yrs

Set by the experience path you choose

Continuing ed

7 hrs

Due each renewal

Do you need a Florida low voltage license?

Yes. You can’t bid on electrical work in Florida without a license, and DBPR treats low voltage and alarm work as a specialty electrical license. Limited energy covers systems of up to 98 volts; for alarm work, you need an Alarm System Contractor license.

You need the license when

  • Working on low voltage wiring, conduit, raceways or fiber optics up to 98 volts, whether you install, repair or design it
  • Installing or servicing alarm systems of any kind, fire included (Alarm System Contractor I)
  • Installing or servicing alarm systems that aren’t fire alarms (Alarm System Contractor II)
  • Bidding on low voltage or electrical jobs in Florida

Exceptions

  • Anything above 98 volts falls outside limited energy work
  • Alarm systems aren’t part of a Limited Energy license; they need an Alarm System Contractor license
  • Fire alarms aren’t included in Alarm System Contractor II

What happens if you work unlicensed

The sources we checked don’t give penalty amounts. Because DBPR can look into unlicensed contracting and take enforcement action, get your license before you bid.

How to get a Florida low voltage license in 6 steps

  1. Get your experience Before you apply
    You qualify through one of three paths. Have you spent 3 years in management in the past 6? Or 4 years as a foreman, supervisor or contractor in the past 8? Or 6 years of combined training and experience in the past 12?
  2. Get approved to test Before you test
    Before you can test, DBPR has to review your application for examination. Send it in through myfloridalicense.com, or talk to someone by calling 850-487-1395.
  3. Pass both exams Exam day
    Once you’re approved, book with Pearson VUE by calling 888-204-6230. You’ll need passing scores on Business and Finance and on your trade exam.
  4. Take care of the legal requirements Before you apply
    Clear your background checks, set up your legal entity, and get insurance, plus a bond if you need one.
  5. Get your financials ready Before you apply
    You’ll need a personal credit report and financial statement with a positive net worth, and a business credit report and financial statement with a net worth of $5,000 or more.
  6. Apply for the license
    Send DBPR your license application along with your exam results, financials and certificate of insurance.

Florida low voltage application checklist

Everything for your Florida application on one page

  • Proof of experience under one of the qualifying paths
  • DBPR exam pre-approval
  • A passing score on Business and Finance and your trade exam
  • Your personal credit report and financial statement
  • A business credit report and statement with $5,000 net worth
  • Your certificate of insurance and legal entity paperwork

Florida low voltage license classes

There are three low voltage licenses in Florida. Each of the two alarm licenses also lets you do everything a Limited Energy license allows.

LE Low voltage

Limited Energy Systems Specialty Contractor

Covers wiring, fixtures, thermostats, raceways, conduit and fiber optics of up to 98 volts (RMS). Alarm systems aren’t included.

ExamB&F + Limited Energy
Limit98 volts, alarms excluded

EF Broadest scope

Alarm System Contractor I

Covers every kind of alarm system for any purpose, fire included, along with all the work a Limited Energy license allows.

ExamB&F + Alarm I
LimitAll alarm systems

EG No fire alarms

Alarm System Contractor II

Covers every kind of alarm system except fire, along with all the work a Limited Energy license allows.

ExamB&F + Alarm II
LimitNo fire alarms

Requirements for each Florida low voltage class

All three licenses have the same experience rules, financial rules and Business and Finance exam. The trade exam is the only thing that’s different.

RequirementLimited EnergyAlarm I (EF)Alarm II (EG)
Experience3 yrs in management, 4 yrs as a foreman, or 6 yrs combined3 yrs in management, 4 yrs as a foreman, or 6 yrs combined3 yrs in management, 4 yrs as a foreman, or 6 yrs combined
Business examBusiness and FinanceBusiness and FinanceBusiness and Finance
Trade examLimited EnergyAlarm System Contractor IAlarm System Contractor II
Business net worthAt least $5,000At least $5,000At least $5,000
Personal financesA credit report and a positive net worthA credit report and a positive net worthA credit report and a positive net worth
InsuranceYou need a certificateYou need a certificateYou need a certificate
Continuing education7 hrs every renewal7 hrs every renewal7 hrs every renewal

The Florida low voltage exam

All applicants sit for Business and Finance and the trade exam for the license they want. You can bring the approved references into each exam, tabbed and highlighted.

Format

Open book

Questions

50 + 100

Passing score

75% on B&F

Exam vendor

Pearson VUE

Scoring and content

  • Business and Finance: 50 questions in 2.5 hours, with 75% needed to pass
  • Limited Energy: 100 questions in 5 hours. Expect low voltage, ADA, OSHA, wiring methods, plan reading and theory
  • Alarm I also tests burglar alarms, initiating devices, protective signaling systems and central station signaling
  • You can tab and highlight approved references
  • Starting in 2027, Florida bases its exams on the 2026 code books. Check the DBPR reference lists for what’s allowed

Retaking the exam

  • Application to retake the exam: $67.25. We couldn’t confirm any other retake rules
  • Call Pearson VUE at 888-204-6230 to book or change your exam
  • You won’t get licensed until you pass both the business exam and the trade exam

Books and codes for this exam (open book)

Florida’s Limited Energy, Alarm System Contractor I and Alarm System Contractor II exams are open book, and the approved references can be tabbed, highlighted and used during the test. The sources we checked don’t list separate books for the electrical Business and Finance exam.

ReferenceEditionHow it’s used
Florida Contractors Manual2025Allowed in exam
OSHA 29 CFR 1926: Safety and Health Regulations for ConstructionNot statedAllowed in exam
NFPA 70: National Electrical Code (NEC)2023Allowed in exam
Telecommunications Wiring3rd editionAllowed in exam
NFPA 780: Standard for the Installation of Lightning Protection Systems — Limited Energy exam2017Allowed in exam
NFPA 72: National Fire Alarm and Signaling Code — Alarm Contractor I exam2019Allowed in exam
NFPA 101: Life Safety Code — Alarm Contractor I exam2018Allowed in exam
Fire Alarm Signaling Systems — Alarm Contractor I examNot statedAllowed in exam
UL 681: Installation and Classification of Burglar and Holdup Alarm Systems — Alarm Contractor I examNot statedAllowed in exam
UL 365: Standard for Police Station Connected Burglar Alarm Units and Systems — Alarm Contractor I examNot statedAllowed in exam
NTC Blue Book: Low Voltage Systems — Alarm Contractor I and II examsNot statedAllowed in exam

UL 681 and UL 365 can be requested free from UL, and UL 365 is discontinued in print. Florida construction exams move to the 2026 code books in 2027, so check the state’s updated exam reference list for which code editions apply to your test date.

Prep for the Florida low voltage exam

Our exam prep course, Total Prep and complete bundle for the Florida low voltage exam. Prices are coming soon.

Books for this exam

Renewing your Florida low voltage license

In Florida, electrical licenses expire on August 31 of even-numbered years. Each renewal calls for 7 hours of continuing education, and renewing a certified Limited Energy or Alarm System license costs $296.

Renewal cycle

Aug 31 of even years

CE hours

7

Renewal fee

$296

Late penalty

Not stated

Licensed in another state?

Florida may accept a similar exam you passed for a license in another state. DBPR publishes a list of the exams it accepts from other agencies.

Other states: your exam may count

Look over DBPR’s list of accepted exams to find out if yours is on it. If it isn’t, you’ll apply as a new applicant and sit for both exams.

City and county rules in Florida

A DBPR license is good across Florida, but permits and inspections for each job are still up to the city or county.

What the state handles

  • Limited Energy and Alarm System Contractor licenses
  • Approving exam candidates
  • Reviewing experience and finances
  • Renewals and continuing education

What cities and counties handle

  • Permits for each job
  • Inspections
  • Local business tax receipts, where they apply

Who oversees low voltage contractors in Florida

Licensing authority

Florida Department of Business and Professional Regulation

850-487-1395

myfloridalicense.com

What the board does

  • Issues the Limited Energy and Alarm System Contractor licenses
  • Approves candidates for the state exams
  • Reviews your experience, financial and insurance paperwork
  • Decides what renewal and continuing education require

Florida low voltage license: common questions

Which Florida license do you need for low voltage work?

For low voltage work up to 98 volts, you need a Limited Energy Systems Specialty Contractor license. For alarm work, you need an Alarm System Contractor I or II license.

How is a Florida Alarm I license different from Alarm II?

Alarm System Contractor I lets you work on every alarm system, fire included. Alarm System Contractor II covers every alarm system but fire. Either one also covers Limited Energy work.

How much experience do you need for a Florida low voltage license?

You need one of these: 3 years in management within the past 6 years; 4 years as a foreman, supervisor or contractor within the past 8; or 6 years of training and experience combined within the past 12.

Can you use books on the Florida low voltage exam?

Yes, and you can tab and highlight the approved references. To pass Business and Finance, you need a 75%.

How many exams does a Florida low voltage license take?

You take two: Business and Finance, and the trade exam that matches your license.

How often do you renew a Florida low voltage license?

Electrical licenses expire on August 31 of even-numbered years. Every renewal requires 7 hours of continuing education.

Can you use an out-of-state exam for a Florida low voltage license?

Maybe. DBPR accepts certain similar exams from other agencies, so look at its list of accepted exams before applying.

Where this information comes from

  1. Florida DBPR, Construction Industry
  2. Florida DBPR, Application for examination checklist
  3. Florida DBPR, Construction examination reference lists
  4. Florida DBPR, Accepted exams from other agencies (PDF)
  5. Florida DBPR, Electrical Contractors’ Licensing Board FAQs (application fees)

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Florida Department of Business and Professional Regulation.