
Home Licenses Electrical Contractor License Florida
Electrical Contractor · Unlimited & Residential
Florida Electrical Contractor License: Requirements, Exam and How to Apply
This guide walks you through a Florida Unlimited or Residential electrical contractor license: qualifying, getting approved to test, passing the exams and keeping your license active.
Last updated October 27, 2026 from Florida Department of Business and Professional Regulation requirements
Exam time
2.5 + 5 hrs
Business & Finance, then the Residential trade exam
Time to get license
3–6 yrs
Set by the experience route you use
Continuing ed
11 hrs
Due every renewal
Do you need a Florida electrical contractor license?
Yes. You can’t bid on an electrical job in Florida without a license. There are two to pick from: Unlimited, which covers every kind of electrical work, and Residential, which is limited to smaller homes with single-phase service.
You need the license when
- Bidding on any electrical project in Florida
- Designing, installing, repairing, altering or adding to electrical wiring, fixtures, appliances, apparatus, raceways or conduit
- Electrical work in plants and substations, alarm systems, or specialty categories (needs the Unlimited license)
- Electrical work on 1–4 family homes of up to 2 stories with single-phase service of up to 400 amps (needs at least the Residential license)
Exceptions
- We couldn’t confirm any exemptions for this license, so check with DBPR before you count on one
- Jobs beyond the Residential limits (above 2 stories, over 4 units, 3-phase, or more than 400 amps) aren’t exempt. You need the Unlimited license for them
What happens if you work unlicensed
The sources we checked don’t give penalty amounts. If you contract without the license you need, the state can fine and discipline you, so get licensed before you bid. Ask DBPR what the penalties are now.
How to get a Florida electrical contractor license in 6 steps
- Pick your experience route Before you apply
You need one of these: 3 of the past 12 years as an electrical engineer; 3 of the past 6 in management; 4 of the past 8 as a foreman, supervisor or contractor; or 6 of the past 12 in training, technical or military work (or a combination adding up to 6). - Get approved to test Before you test
PTI decides who’s pre-approved to test. Send them your application for examination through floridaexam.com, or call 407-264-0562. - Pass the exams Exam day
Call Pearson VUE at 888-204-6230 to book. You’ll take Business & Finance along with one trade exam (Unlimited, Residential or NASCLA Electrical), and you can use references on each. - Take care of the legal requirements Before you apply
Clear your background checks, set up your legal entity, and buy the insurance you need, plus a bond if one is required. - Pull together your financials Before you apply
Get credit reports and financial statements for yourself and the business. Your business needs a net worth of $10,000 or more. - Apply to DBPR Final step
Send your license application to DBPR. Your first certified license costs $296. If you have questions, call 850-487-1395.
Florida electrical contractor application checklist
Everything for your Florida application on one page
- Proof of 3–6 years of experience that qualifies
- PTI exam pre-approval
- A passing score on Business & Finance and your trade exam
- Credit reports and financial statements, personal and business
- A certificate of insurance
- Your legal entity set up and background check cleared
Florida electrical contractor license classes
There are two electrical contractor licenses in Florida. You take the same Business & Finance exam for either one; what changes is the trade exam and the work you’re allowed to do.
UNL Full scope
Unlimited Electrical Contractor
Lets you design, install, repair, alter or add to wiring, fixtures, apparatus, raceways and conduit, and covers plants, substations, every alarm system and all specialty categories.
| Exam | B&F + Unlimited or NASCLA |
| Limit | No scope limit stated |
RES Homes only
Residential Electrical Contractor
Lets you do electrical work on homes with 1, 2, 3 or 4 families and up to 2 stories, along with their accessory structures.
| Exam | B&F + Residential or NASCLA |
| Limit | Single phase, 400 amp single service |
Requirements for each Florida electrical contractor class
The two licenses share most of their requirements. Unlimited also asks for experience with 3-phase work.
| Requirement | Unlimited | Residential |
|---|---|---|
| Experience | 3–6 yrs through one qualifying route | 3–6 yrs through one qualifying route |
| 3-phase work | 40% or more of your experience | Not stated |
| Business & Finance exam | Required | Required |
| Trade exam | Unlimited or NASCLA Electrical | Residential or NASCLA Electrical |
| Business net worth | $10,000 or more | $10,000 or more |
| Personal finances | A credit report and a positive net worth | A credit report and a positive net worth |
| Insurance | A certificate showing coverage | A certificate showing coverage |
| Minimum age | Not stated | Not stated |
The Florida electrical contractor exam
All applicants take Business & Finance. For the trade part, pick either the Florida exam that matches your license or the NASCLA Accredited Electrical Exam. You can bring approved references into each, tabbed and highlighted.
Format
Open book, computer
Questions
50 + 80 (Residential)
Passing score
75%
Exam vendor
Pearson VUE
Scoring and content
- Business & Finance: 50 questions in 2.5 hours, with 75% needed to pass
- Residential: 80 questions in 5 hours, with 75% needed to pass
- NASCLA Electrical: 100 questions in 270 minutes; you need 75 right to pass
- Unlimited exam details: we couldn’t confirm them
- Starting in 2027, exams are based on the 2026 code books. The reference lists have the details
Retaking the exam
- Application to retake the exam: $67.25
- Any other retake rules: not published
- You have to get PTI pre-approval before you can book
- When you book, ask Pearson VUE how rescheduling works
Books and codes for this exam (open book)
Florida’s electrical contractor exams are open book, and you can tab and highlight the references below and use them during the test. The list covers the Unlimited and Residential Electrical Contractor exams plus the Business & Finance exam for electrical contractors.
Florida construction exams move to the 2026 code books in 2027, so check the state’s updated reference list for your exam date. If you take the NASCLA Accredited Electrical Exam instead, check the NASCLA candidate bulletin for its references.
Prep for the Florida electrical contractor exam
Our exam prep course, Total Prep and complete bundle for the Florida electrical contractor exam. Prices are coming soon.
Books for this exam
-

Design and Control of Concrete Mixtures, 17th edition
Price coming soon -

Engineering Sign Structures: An Introduction to Analysis and Design
Price coming soon -

Florida Statutes, Chapter 455: Business and Professional Regulation, General Provisions, 2019
Price coming soon -

Neon Techniques and Handling: Handbook of Neon Sign and Cold Cathode Lighting
Price coming soon -

NFPA 101: Life Safety Code, 2018 Edition
Price coming soon -

NFPA 70, National Electrical Code: 2023 Edition
Price coming soon -

NFPA 72: National Fire Alarm and Signaling Code, 2019 Edition
Price coming soon -

NTC Blue Book: Low Voltage Systems
Price coming soon -

Safety and Health Regulations for Construction (29 CFR Part 1926)
Price coming soon -

Telecommunications Wiring, 3rd edition
Price coming soon -

UL 681, Installation and Classification of Burglar and Holdup Alarm Systems
Price coming soon -

Book Tabs
Price coming soon
Renewing your Florida electrical contractor license
You need 11 hours of continuing education every renewal in Florida. Certified electrical licenses expire on August 31 of even-numbered years, and renewing costs $296.
Renewal cycle
2 yrs, expiring Aug 31 of even years
CE hours
11
Renewal fee
$296
Late penalty
Not stated
Florida electrical contractor CE
Hours, deadlines, required topics and the renewal steps, in one guide.
Licensed in another state?
We couldn’t confirm any reciprocity agreements for this license. You can, however, take the NASCLA Accredited Electrical Exam in place of Florida’s trade exam; 15 state licensing boards accept it.
No reciprocity with other states
The sources we checked don’t list any. Plan to apply as a new applicant, and ask DBPR if an agreement applies to the license you hold now.
City and county rules in Florida
A state license lets you work anywhere in Florida, but each job’s permits and inspections are still up to the local government.
What the state handles
- Licensing electrical contractors
- Approving and testing exam candidates
- Renewals and continuing education
- Disciplining license holders
What cities and counties handle
- Electrical and building permits
- Inspections on the job
- Local business registration, if any, so ask your city or county
Who oversees electrical contractors in Florida
Licensing authority
Florida Department of Business and Professional Regulation
850-487-1395
What the board does
- Reviews exam and license applications
- Issues electrical contractor licenses and renews them
- Decides what continuing education you need
- Takes disciplinary action against license holders
Florida electrical contractor license: common questions
Do you need a license for electrical work in Florida?
Yes. In Florida, you need a license to bid on an electrical job of any size.
How is a Florida Unlimited electrical license different from Residential?
Unlimited covers every type of electrical work, from alarm systems to plants and substations. Residential only covers 1–4 family homes of up to 2 stories with single-phase service of up to 400 amps.
How much experience do you need for a Florida electrical contractor license?
It takes 3 to 6 years, based on the route you use. One route, for example, is 4 of the past 8 years as a foreman, supervisor or contractor. For Unlimited, at least 40% of your work must be on 3-phase services.
Can you use books on the Florida electrical contractor exam?
Yes. You can bring approved references into the exam and tab and highlight them.
Can you take the NASCLA exam for a Florida electrical license?
Yes. The NASCLA Accredited Electrical Exam can replace Florida’s trade exam. You still have to pass Business & Finance, though.
How many CE hours do Florida electrical contractors need?
You need 11 hours of continuing education every renewal.
What net worth do you need for a Florida electrical contractor license?
Your personal financial statement has to show a positive net worth, and your business statement has to show at least $10,000.
Where this information comes from
- Florida DBPR, Construction Industry licensing
- Florida DBPR, Construction examination reference lists
- PTI, Florida exam pre-approval
- Florida Statutes, Chapter 455
- Pearson VUE, Florida contractor exam scheduling
- NASCLA Accredited Electrical Exam
- Florida DBPR, Electrical Contractors’ Licensing Board FAQs (application fees)
Last updated October 27, 2026. Spot something out of date? Tell us.
Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Florida Department of Business and Professional Regulation.