Virginia Specialty Contractor License: Requirements, Exam and How to Apply, Virginia Specialty Contractor License, Virginia, Drywall, Finish Carpentry, Framing, Insulation & Weather Stripping, Painting & Wall Covering, Virginia Board for Contractors (DPOR), how to get a Virginia Specialty Contractor License, Virginia Specialty Contractor License requirements, Virginia Specialty Contractor License exam, Virginia licensing board, Virginia contractor license, license application steps, exam reference books, Depends on your class, Experience, Required

Home Licenses Specialty Contractor License Virginia

Specialty Contractor · Drywall, Framing, Painting & more

Virginia Specialty Contractor License: Requirements, Exam and How to Apply

Five Virginia specialty designations are covered here: drywall, finish carpentry, framing, insulation and weather stripping, and painting and wall covering. Every one of them goes on a Class A, B or C contractor license, so this guide explains both sets of requirements.

Last updated October 27, 2026 from Virginia Board for Contractors requirements

Exam time

1–2 hrs

For the specialty exam; Class A and B take more exams

Time to get license

~2–5 yrs

Class C needs 2 yrs, B needs 3 yrs, A needs 5 yrs

Continuing ed

Not required

None for contractor licenses (trades have their own rules)

Do you need a Virginia specialty contractor license?

Yes, when you contract for this kind of work in Virginia. You can’t hold a specialty designation by itself. It goes on a Class A, B or C contractor license from the Virginia Board for Contractors, and you pass the specialty exam in addition to meeting your class requirements.

You need the license when

  • Your work includes installing, taping or finishing drywall, gypsum board or nonstructural metal studs (Drywall)
  • Cabinets, casing, baseboards, wood floors, countertops and other millwork: if you put them in or finish them, that’s Finish Carpentry
  • You’re a subcontractor doing framing or rough carpentry for a licensed prime contractor (Framing)
  • Your work includes installing, repairing or removing insulation for sound or temperature control (Insulation and Weather Stripping)
  • Painting or wall covering contracts above $1,000 fall under the Painting and Wall Covering specialty

Exceptions

  • Painting and wall covering jobs of $1,000 or less
  • Anyone holding the RBC or CBC classification, or the HIC or CIC specialty, since those already cover this work
  • The insulation specialty doesn’t include insulating mechanical equipment, lines or piping
  • Finish carpentry doesn’t include ceramic tile, marble or cultured stone

What happens if you work unlicensed

We couldn’t confirm penalty amounts. As a rule, the Board for Contractors can look into unlicensed contracting and discipline people for it. Have your license and specialty in hand before you bid or sign anything.

How to get a Virginia specialty contractor license in 6 steps

  1. Choose your class and specialty First step
    Your experience (5, 3 or 2 years) points you to Class A, B or C. Then pick the specialty that fits your trade.
  2. Finish the 8-hour pre-licensing course Before applying
    All Virginia contractor license applicants take an 8-hour course approved by the state. After you finish it, the credit never expires.
  3. Get pre-approved, then book with PSI Before testing
    You can’t schedule without pre-approval. Book online at candidate.psiexams.com or by phone at 855-340-3910. You’ll find test centers in the bigger cities across Virginia.
  4. Pass the exams Exam day
    Sit your specialty exam, which is open book. If you’re applying for Class A, you also pass the Virginia, General and Advanced portions; for Class B, it’s the Virginia and General portions.
  5. Submit your application to DPOR
    Send your application to the Board for Contractors. You can reach them at 804-367-8511 or dpor.virginia.gov/Boards/Contractors.
  6. Get your license Once reviewed
    Your Class A, B or C license will show your specialty designation.

Virginia specialty contractor application checklist

Virginia’s application on one page

  • Experience for your class (2, 3 or 5 years)
  • Certificate for the 8-hour pre-licensing course
  • Pre-approval from PSI for your exams
  • A passing score on the specialty exam
  • For Class A: the Virginia, General and Advanced exams (Class B skips Advanced)
  • DPOR application and license fee paid ($274.50–$439.50)

Virginia specialty contractor license classes

Every specialty goes on a Class A, B or C contractor license. The class determines your experience and exam requirements, and the specialty determines your trade exam.

DRY Interior

Drywall

Covers sheet metal studs for ceilings and nonstructural partitions, plus hanging, taping and finishing drywall, gypsum wallboard, sheathing and cementitious board.

Exam40 questions, 90 min
LimitDepends on your class

FIN Millwork

Finish Carpentry

Putting in, fixing and finishing cabinets, sash and door casing, wood floors, baseboards, countertops and other millwork. Tile, marble and cultured stone aren’t included.

Exam30 questions, 60 min
LimitDepends on your class

FRM Subcontractor

Framing

Rough carpentry or framing done as a subcontractor for a licensed prime contractor, which includes the individual parts of framing systems.

Exam40 questions, 90 min
LimitDepends on your class

INS Energy

Insulation & Weather Stripping

Putting in, fixing, upgrading or taking out insulating material used only to control sound or temperature in homes and commercial buildings.

Exam40 questions, 90 min
LimitDepends on your class

PWC Above $1,000

Painting & Wall Covering

Painting inside and out, surface prep, sanding and caulking, along with hanging vinyl, wallpaper and fabric wall coverings.

Exam50 questions, 120 min
LimitDepends on your class

Requirements for each Virginia specialty contractor class

All five specialties start from the same base: a Class A, B or C license and the specialty exam. Your class changes how much experience you need and which extra exams you take.

RequirementClass CClass BClass A
Experience2 years3 years5 years
8-hour pre-licensing courseRequiredRequiredRequired
Virginia, General and Advanced examsNot requiredVirginia and General onlyRequired
Specialty examRequiredRequiredRequired
PSI pre-approvalRequiredRequiredRequired
Minimum ageNot statedNot statedNot stated

The Virginia specialty contractor exam

PSI gives a separate open-book trade exam for each specialty, and 70% passes any of them. The specialty exam won’t get you licensed by itself, though: you still have to meet the requirements for Class A, B or C.

Format

Open book

Questions

30–50

Passing score

70%

Exam vendor

PSI

Scoring and content

  • Drywall: 90 minutes, 40 questions, pass with 28 correct
  • Finish Carpentry: 60 minutes, 30 questions, pass with 21 correct
  • Framing: 90 minutes, 40 questions, pass with 28 correct
  • Insulation and Weather Stripping: 90 minutes, 40 questions, pass with 28 correct
  • Painting and Wall Covering: 120 minutes, 50 questions, pass with 35 correct

Retakes

  • Each specialty exam costs $85 at PSI; we couldn’t confirm how long you wait before a retake
  • Book exams and retakes with PSI at 855-340-3910
  • You need pre-approval before scheduling
  • Each time you test, you can tab and highlight the approved references

Books and codes for this exam (open book)

Virginia’s specialty trade exams are open book, and the references below can be tabbed, highlighted and used during the test. The list covers the Drywall, Finish Carpentry, Insulation and Weather Stripping, and Painting and Wall Covering exams, plus the business book used on the Class A/B contractor exam.

ReferenceEditionHow it’s used
OSHA 29 CFR 1926 Construction Industry Regulations — all specialty examsNot statedAllowed in exam
The Gypsum Construction Handbook — Drywall exam7th editionAllowed in exam
International Building Code (IBC) — Drywall exam2021Allowed in exam
International Residential Code (IRC) — Drywall exam2021Allowed in exam
Finish Carpenter’s Manual — Finish Carpentry examNot statedAllowed in exam
Complete Illustrated Guide to Furniture and Cabinet Construction — Finish Carpentry examNot statedAllowed in exam
Carpentry and Building Construction, Student Edition — Insulation and Weather Stripping exam2016Allowed in exam
Insulation Handbook — Insulation and Weather Stripping exam2000Allowed in exam
PDCA Craftsman Manual & Textbook — Painting and Wall Covering exam8th editionAllowed in exam
Paint Contractor’s Manual — Painting and Wall Covering examNot statedAllowed in exam
Virginia Uniform Statewide Building Code (Chapter 1 only) — Drywall and Painting exams2021Allowed in exam
Virginia Uniform Statewide Building Code (Chapter 1 only) — Finish Carpentry and Insulation exams2018Allowed in exam
NASCLA Contractor’s Guide to Business, Law and Project Management — Class A/B contractor examNot statedAllowed in exam

The sources we checked don’t give a framing-specific reference list (the framing page points to the Residential and Commercial Building sets), so Framing candidates should check the exam vendor’s bulletin; the Insulation Handbook is out of print.

Prep for the Virginia specialty contractor exam

Our exam prep course, Total Prep and complete bundle for the Virginia specialty contractor exam. Prices are coming soon.

Books for this exam

Renewing your Virginia specialty contractor license

Contractor licenses in Virginia have no continuing education requirement, but trade licenses set their own CE rules. You renew every 2 years and pay $220 (Class C), $260 (Class B) or $270 (Class A), along with a $30 Recovery Fund assessment. If you miss the deadline, you pay a reinstatement fee of $460 for Class C or $550 for Class A or B instead.

Renewal cycle

Every 2 years

CE hours

Not required

Renewal fee

$220–$270 plus $30 Recovery Fund

Late penalty

$460–$550 to reinstate

Licensed in another state?

There are no contractor license reciprocity agreements in Virginia, so contractors from other states meet the same requirements as anyone else.

No reciprocity

You go through the process as a new applicant: finish the 8-hour course, pass your specialty exam plus any Class A or B exams, and then apply with DPOR.

City and county rules in Virginia

The state issues your contractor license and specialty. The job-site side of your work is handled by local governments.

The state handles

  • Class A, B and C contractor licensing
  • Specialties and their exams (through PSI)
  • Approving pre-licensing courses
  • Disciplining licensees

Cities and counties handle

  • Building permits and job inspections
  • Local business licensing
  • Building code enforcement on your jobs

Who oversees specialty contractors in Virginia

Licensing authority

Virginia Board for Contractors (DPOR)

804-367-8511

dpor.virginia.gov/Boards/Contractors

What the board does

  • Grants Class A, B and C contractor licenses and specialty designations
  • Decides the experience and exam requirements
  • Approves the pre-licensing education
  • Deals with complaints and discipline

Virginia specialty contractor license: common questions

Is a Virginia specialty contractor license its own license?

No. It’s a designation, not a license. Drywall, framing, finish carpentry, insulation and painting each get added to a Class A, B or C contractor license, and you have to hold both.

Do you need a license to paint houses in Virginia?

Yes, when the painting or wall covering job is worth more than $1,000. You need a Class A, B or C license that carries the Painting and Wall Covering specialty.

Are Virginia specialty contractor license exams open book?

Yes, every one of them. You can tab and highlight the approved references, and 70% is a passing score.

Do Virginia Class C license applicants take the Virginia, General and Advanced exams?

No. For Class C, you finish the 8-hour pre-licensing course and pass your specialty exam. For Class A, you also pass the Virginia, General and Advanced portions; for Class B, the Virginia and General portions.

How much experience do you need for a Virginia specialty contractor license?

That depends on the class: Class C needs 2 years, Class B needs 3 years and Class A needs 5 years.

Do Virginia specialty contractors need continuing education?

Not for the contractor license. CE applies to trades like plumbing and electrical.

Can I use my out-of-state contractor license in Virginia?

No. Virginia has no reciprocity agreements for contractor licenses, so you go through the process as a new applicant.

Where this information comes from

  1. Virginia DPOR, Board for Contractors
  2. PSI, Candidate exam scheduling
  3. Virginia DHCD, 2021 Virginia Construction Code (PDF)
  4. DPOR, Contractor License Application (PDF)
  5. Virginia Administrative Code, 18VAC50-22-100 Fees
  6. Virginia Administrative Code, 18VAC50-22-140 Renewal fees
  7. Virginia Administrative Code, 18VAC50-22-170 Reinstatement fees
  8. Virginia Administrative Code, 18VAC50-22-110 Renewal required
  9. PSI, Virginia Contractor Specialty Examination Candidate Information Bulletin (PDF)
  10. PSI, Virginia Contractor Examination Candidate Information Bulletin (PDF)
  11. DPOR, Additional Specialty Designation Application (PDF)

Last updated October 27, 2026. Spot something out of date? Tell us.

Linden Prep is an independent exam prep and continuing education company. It is not affiliated with the Virginia Board for Contractors.